Directory Search Results

Print List

#240904726

‘PREMIX’ range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. The supplies to both the domestic hot water and primary circuit are controlled via spherical valves. Maximum working pressures: Primary circuit: 2.5 bar, Secondary circuit 10.0 bar. Maximum operating temperature both circuits: 80°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240904726
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression (Primary Circuit) 15mm compression (Secondary Circuit)
Marking:
E.C.A. on front cover. E.C.A, model and technical information including KW rating on adhesive label on body.
Installation Requirements:
R001 R360
Expiry date:
30/09/2029
Model:
8116350010 CALORA PREMIX 24 HM ERP UK 8116484110 CALORA PREMIX 14 HM ERP UK 8116487110 CALORA PREMIX 20 HM ERP UK 8116356010 CALORA PREMIX 28 HM ERP UK 8116389010 CITIUS PREMIX 14 HM ERP UK 8116392010 CITIUS PREMIX 20 HM ERP UK 8116353010 CITIUS PREMIX 24 HM ERP UK 8116380010 CITIUS PREMIX 28 HM ERP UK 8116576110 Proteus Premix 42 HM DG ERP UK 8116550010 Proteus Premix 45 HM DG ERP UK
Product Images

Approval Holder:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company
Manufacturer:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company

Print This Approval


#2103042

Range of rotating piston, volumetric in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
¾” BSP - 2” BSP (M) inlet and outlet.
Marking:
George Kent on lid.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
GKMV30 - DN15, 20, 25, 30 & 40

Approval Holder:
George Kent (Malaysia) Berhad
Company Name
George Kent (Malaysia) Berhad
Address
1115 Blok A, Jalan Puchong, Taman Meranti Jaya, 47120 Puchong, Selangor Darul Ehsan
Country
Malaysia

View All Listings by this Company

Print This Approval


#241002010

Range of in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) to 1½” BSP (M)
Marking:
ZENNER on cover. Flow arrow on body. Zenner and product info on meter face.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
IUWS hydr. 2,5-110-1/2 D-cell IUWS hydr. 2,5-165-1/2 D-cell IUWS hydr. 2,5-170-1/2 D-cell IUWS hydr. 2,5-190-1/2 D-cell IUWS hydr. 4-105-3/4 D-cell IUWS hydr. 4-130-3/4 D-cell IUWS hydr. 4-165-3/4 D-cell IUWS hydr. 4-190-3/4 D-cell IUWS hydr. 4-220-3/4 D-cell IUWS hydr. 10-150-1 D-cell IUWS hydr. 10-160-1 D-cell IUWS hydr. 10-160-5/4 D-cell IUWS hydr. 10-260-5/4 D-cell IUWS hydr. 16-150-6/4 D-cell IUWS hydr. 16-200-6/4 D-cell IUWS hydr. 16-300-6/4 D-cell IUWS hydr. 25-300-2 D-cell
Product Images

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company
Manufacturer:
Zenner Meters (Shanghai) Ltd.
Company Name
Zenner Meters (Shanghai) Ltd.
Address
No 15 Dongxing Road Songjiang Ind Zone Shanghai
Country
China

View All Listings by this Company

Print This Approval


#241002014

Range of IUW ultrasonic water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature: 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models below, note all sizes listed in DN are flanged connections.
Marking:
Zenner, DN, Year of manufacture (YYYY) and technical information on dial face. Size & flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
IUW Q3-25, DN50, Length 200mm IUW Q3-25, DN50, Length 270mm IUW Q3-25, DN50, Length 300mm IUW Q3-40, DN65, Length 200mm IUW Q3-40, DN65, Length 300mm IUW Q3-63, DN80, Length 225mm IUW Q3-63, DN80, Length 300mm IUW Q3-63, DN80, Length 225mm IUW Q3-63, DN80, Length 200mm IUW Q3-100, DN100, Length 360mm IUW Q3-100, DN100, Length 350mm IUW Q3-100, DN100, Length 250mm IUW Q3-160, DN125, Length 250mm IUW Q3-250, DN150, Length 300mm IUW Q3-250, DN150, Length 500mm IUW Q3-400, DN200, Length 350mm IUW Q3-630, DN250, Length 450mm IUW Q3-1000, DN300, Length 500mm
Product Images

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company

Print This Approval


#241002027

Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters, and the outlets incorporate non-return valves (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 65.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) ¾” BSP (M 1¼” BSP M, 1½” BSP M, 2” BSP
Marking:
Janz logo, model code and other info on meter box
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
Smartio DN15 Q3=2,5 R*** Smartio DN20 Q3=2,5 R*** Smartio DN20 Q3=4 R*** Models added August 2025: Smartio DN25 Q3=6,3 R*** Smartio DN32 Q3=10 R*** Smartio DN40 Q3=16 R*** Body lengths: DN25: 150mm/160mm/175mm/198mm*/220mm*/260mm* DN32: 150mm/160mm/200mm*/220mm*/260mm* DN40: 150mm/200mm/300mm* *It’s possible to put a non-return valve (NRV)
Product Images

Manufacturer:
Janz Contagem e Gestão de Fluidos, SA
Company Name
Janz Contagem e Gestão de Fluidos, SA
Address
Av. Infante D. Henrique nº 286 Lisboa
Postcode
1950-421
Country
Portugal
Phone
00351 21 831 6000

View All Listings by this Company

Print This Approval


#240902065

Range of ‘Thermowatt’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD
Marking:
Thermowatt logo, Model, Voltage, Size and other information on cap.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled
Product Images

Approval Holder:
Thermowatt S.p.A.
Company Name
Thermowatt S.p.A.
Address
Via San Giovanni Battista 21 Arcevia
Postcode
60011
Country
Italy
Phone
+39 0731988246
General Email
thermowatt@legalmail.it

View All Listings by this Company

Print This Approval


#241004701

Range of two, three or four pump booster sets, with vertical multistage pumps comprising of pressure vessels, stainless steel manifolds, pressure gauges, spherical valves and EPDM O-rings. Maximum working pressure - 10.0 bar. Max operating temperature - Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
241004701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Flanged - DN50 - DN100 - See models.
Marking:
Adhesive label on panel with company (Dutypoint), model & technical info including pressures.
Installation Requirements:
R001 R415
Expiry date:
31/10/2029
Model:
VRX2-05-XXXX - DN50, VRX2-10-XXXX - DN65, VRX2-15-XXXX - DN80, VRX2-22-XXXX - DN80, VRX3-05-XXXX - DN50, VRX3-10-XXXX - DN65, VRX3-15-XXXX - DN80, VRX3-22-XXXX - DN80, VRX4-05-XXXX - DN65, VRX4-10-XXXX - DN80, VRX4-15-XXXX - DN100, VRX4-22-XXXX - DN100. Note, XXXX on end of model codes above denotes motor size and type. Example of model number: VRX2-10-040T Range: VRX Number of pumps: 2 Nominal Flow rate (m3/hr): 10 Motor kw (without decimal): 040 (4kw) Voltage T (T=400/3/50 M=230/1/50)
Product Images

Approval Holder:
Dutypoint Ltd.
Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334
General Email
austin.hill@dutypoint.com

View All Listings by this Company

Print This Approval


#241004717

Range of two, three and four pump cold water booster sets. The products incorporate a suction and discharge manifold and pumps. Maximum working pressure 10 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
241004717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” inlet and 1” outlet 1 ¼” inlet and 1” outlet 1 ½” inlet and 1 ¼” outlet 2” inlet and 1 ½” outlet 2” inlet and 2” outlet 2 ½” inlet and 2” outlet 3” inlet and 2 ½” outlet 3” inlet and 3” outlet
Marking:
Stuart Turner, model and product info on adhesive label on back of control box.
Installation Requirements:
R001 R415
Expiry date:
31/10/2029
Model:
SP1V-3HM04S-VARiFLO-8 SP1V-3HM06S-VARiFLO-8 SP1V-3HM08S-VARiFLO-8 SP1V-3HM10S-VARiFLO-8 SP1V-3HM12S-VARiFLO-8 SP1V-5HM04S-VARiFLO-8 SP1V-5HM06S-VARiFLO-8 SP1V-5HM08S-VARiFLO-8 SP1V-5HM10S-VARiFLO-8 SP1V-5HM12S-VARiFLO-8 SP1V-10HM03S-VARiFLO-8 SP1V-10HM04S-VARiFLO-8 SP1V-10HM06S-VARiFLO-8 SP1V-15HM03S-VARiFLO-8 SP2V-3HM04S-VARiFLO-24 SP2V-3HM06S-VARiFLO-24 SP2V-3HM08S-VARiFLO-24 SP2V-3HM10S-VARiFLO-24 SP2V-3HM12S-VARiFLO-24 SP2V-5HM04S-VARiFLO-24 SP2V-5HM06S-VARiFLO-24 SP2V-5HM08S-VARiFLO-24 SP2V-5HM10S-VARiFLO-24 SP2V-5HM12S-VARiFLO-24 SP2V-10HM03S-VARiFLO-24 SP2V-10HM04S-VARiFLO-24 SP2V-10HM06S-VARiFLO-24 SP2V-15HM03S-VARiFLO-24 SP3V-3HM04S-VARiFLO-24 SP3V-3HM06S-VARiFLO-24 SP3V-3HM08S-VARiFLO-24 SP3V-3HM10S-VARiFLO-24 SP3V-3HM12S-VARiFLO-24 SP3V-5HM04S-VARiFLO-24 SP3V-5HM06S-VARiFLO-24 SP3V-5HM08S-VARiFLO-24 SP3V-5HM10S-VARiFLO-24 SP3V-5HM12S-VARiFLO-24 SP3V-10HM03S-VARiFLO-24 SP3V-10HM04S-VARiFLO-24 SP3V-10HM06S-VARiFLO-24 SP3V-15HM03S-VARiFLO-24 SP1V-0304-VARiFLO-8 SP1V-0306-VARiFLO-8 SP1V-0308-VARiFLO-8 SP1V-0310-VARiFLO-8 SP1V-0312-VARiFLO-8 SP1V-0504-VARiFLO-8 SP1V-0506-VARiFLO-8 SP1V-0508-VARiFLO-8 SP1V-0510-VARiFLO-8 SP1V-0512-VARiFLO-8 SP1V-1003-VARiFLO-8 SP1V-1004-VARiFLO-8 SP1V-1006-VARiFLO-8 SP1V-1503-VARiFLO-8 SP2V-0304-VARiFLO-24 SP2V-0306-VARiFLO-24 SP2V-0308-VARiFLO-24 SP2V-0310-VARiFLO-24 SP2V-0312-VARiFLO-24 SP2V-0504-VARiFLO-24 SP2V-0506-VARiFLO-24 SP2V-0508-VARiFLO-24 SP2V-0510-VARiFLO-24 SP2V-0512-VARiFLO-24 SP2V-1003-VARiFLO-24 SP2V-1004-VARiFLO-24 SP2V-1006-VARiFLO-24 SP2V-1503-VARiFLO-24 SP3V-0304-VARiFLO-24 SP3V-0306-VARiFLO-24 SP3V-0308-VARiFLO-24 SP3V-0310-VARiFLO-24 SP3V-0312-VARiFLO-24 SP3V-0504-VARiFLO-24 SP3V-0506-VARiFLO-24 SP3V-0508-VARiFLO-24 SP3V-0510-VARiFLO-24 SP3V-0512-VARiFLO-24 SP3V-1003-VARiFLO-24 SP3V-1004-VARiFLO-24 SP3V-1006-VARiFLO-24 SP3V-1503-VARiFLO-24 SP1V-CM3-3-VARiFLO-8 SP1V-CM3-5-VARiFLO-8 SP1V-CM3-7-VARiFLO-8 SP1V-CM3-9-VARiFLO-8 SP1V-CM3-11-VARiFLO-8 SP1V-CM5-3-VARiFLO-8 SP1V-CM5-5-VARiFLO-8 SP1V-CM5-7-VARiFLO-8 SP1V-CM5-9-VARiFLO-8 SP1V-CM5-11-VARiFLO-8 SP1V-CM10-2-VARiFLO-8 SP1V-CM10-3-VARiFLO-8 SP1V-CM10-5-VARiFLO-8 SP1V-CM15-2-VARiFLO-8 SP2V-CM3-3-VARiFLO-24 SP2V-CM3-5-VARiFLO-24 SP2V-CM3-7-VARiFLO-24 SP2V-CM3-9-VARiFLO-24 SP2V-CM3-11-VARiFLO-24 SP2V-CM5-3-VARiFLO-24 SP2V-CM5-5-VARiFLO-24 SP2V-CM5-7-VARiFLO-24 SP2V-CM5-9-VARiFLO-24 SP2V-CM5-11-VARiFLO-24 SP2V-CM10-2-VARiFLO-24 SP2V-CM10-3-VARiFLO-24 SP2V-CM10-5-VARiFLO-24 SP2V-CM15-2-VARiFLO-24 SP3V-CM3-3-VARiFLO-24 SP3V-CM3-5-VARiFLO-24 SP3V-CM3-7-VARiFLO-24 SP3V-CM3-9-VARiFLO-24 SP3V-CM3-11-VARiFLO-24 SP3V-CM5-3-VARiFLO-24 SP3V-CM5-5-VARiFLO-24 SP3V-CM5-7-VARiFLO-24 SP3V-CM5-9-VARiFLO-24 SP3V-CM5-11-VARiFLO-24 SP3V-CM10-2-VARiFLO-24 SP3V-CM10-3-VARiFLO-24 SP3V-CM10-5-VARiFLO-24 SP3V-CM15-2-VARiFLO-24 SP2V-3HM04S-VARiFLO-18 SP2V-3HM06S-VARiFLO-18 SP2V-3HM08S-VARiFLO-18 SP2V-3HM10S-VARiFLO-18 SP2V-3HM12S-VARiFLO-18 SP2V-5HM04S-VARiFLO-18 SP2V-5HM06S-VARiFLO-18 SP2V-5HM08S-VARiFLO-18 SP2V-5HM10S-VARiFLO-18 SP2V-5HM12S-VARiFLO-18 SP2V-10HM03S-VARiFLO-18 SP2V-10HM04S-VARiFLO-18 SP2V-10HM06S-VARiFLO-18 SP2V-15HM03S-VARiFLO-18 SP3V-3HM04S-VARiFLO-18 SP3V-3HM06S-VARiFLO-18 SP3V-3HM08S-VARiFLO-18 SP3V-3HM10S-VARiFLO-18 SP3V-3HM12S-VARiFLO-18 SP3V-5HM04S-VARiFLO-18 SP3V-5HM06S-VARiFLO-18 SP3V-5HM08S-VARiFLO-18 SP3V-5HM10S-VARiFLO-18 SP3V-5HM12S-VARiFLO-18 SP3V-10HM03S-VARiFLO-18 SP3V-10HM04S-VARiFLO-18 SP3V-10HM06S-VARiFLO-18 SP3V-15HM03S-VARiFLO-18 SP2V-0304-VARiFLO-18 SP2V-0306-VARiFLO-18 SP2V-0308-VARiFLO-18 SP2V-0310-VARiFLO-18 SP2V-0312-VARiFLO-18 SP2V-0504-VARiFLO-18 SP2V-0506-VARiFLO-18 SP2V-0508-VARiFLO-18 SP2V-0510-VARiFLO-18 SP2V-0512-VARiFLO-18 SP2V-1003-VARiFLO-18 SP2V-1004-VARiFLO-18 SP2V-1006-VARiFLO-18 SP2V-1503-VARiFLO-18 SP3V-0304-VARiFLO-18 SP3V-0306-VARiFLO-18 SP3V-0308-VARiFLO-18 SP3V-0310-VARiFLO-18 SP3V-0312-VARiFLO-18 SP3V-0504-VARiFLO-18 SP3V-0506-VARiFLO-18 SP3V-0508-VARiFLO-18 SP3V-0510-VARiFLO-18 SP3V-0512-VARiFLO-18 SP3V-1003-VARiFLO-18 SP3V-1004-VARiFLO-18 SP3V-1006-VARiFLO-18 SP3V-1503-VARiFLO-18 SP2V-CM3-3-VARiFLO-18 SP2V-CM3-5-VARiFLO-18 SP2V-CM3-7-VARiFLO-18 SP2V-CM3-9-VARiFLO-18 SP2V-CM3-11-VARiFLO-18 SP2V-CM5-3-VARiFLO-18 SP2V-CM5-5-VARiFLO-18 SP2V-CM5-7-VARiFLO-18 SP2V-CM5-9-VARiFLO-18 SP2V-CM5-11-VARiFLO-18 SP2V-CM10-2-VARiFLO-18 SP2V-CM10-3-VARiFLO-18 SP2V-CM10-5-VARiFLO-18 SP2V-CM15-2-VARiFLO-18 SP3V-CM3-3-VARiFLO-18 SP3V-CM3-5-VARiFLO-18 SP3V-CM3-7-VARiFLO-18 SP3V-CM3-9-VARiFLO-18 SP3V-CM3-11-VARiFLO-18 SP3V-CM5-3-VARiFLO-18 SP3V-CM5-5-VARiFLO-18 SP3V-CM5-7-VARiFLO-18 SP3V-CM5-9-VARiFLO-18 SP3V-CM5-11-VARiFLO-18 SP3V-CM10-2-VARiFLO-18 SP3V-CM10-3-VARiFLO-18 SP3V-CM10-5-VARiFLO-18 SP3V-CM15-2-VARiFLO-18 Models added August 2025: AH1-XXXX-XXX-X - Flowboost AH, AH2-XXXX-XXX-X - Flowboost AH, AH3-XXXX-XXX-X - Flowboost AH. Where: XXXX = PUMP MODEL CODE, XXX = KW SIZE REFERENCE, X = VOLTAGE. AH1-0304L-003-M AH1-0306L-005-M AH1-0308L-007-M AH1-0310L-007-M AH1-0312L-011-M AH1-0504L-005-M AH1-0506L-011-M AH1-0508L-011-M AH1-0510L-015-M AH1-0512L-022-M AH1-1003L-011-M AH1-1004L-015-M AH1-1006L-022-M AH1-1503L-022-M AH2-0304L-003-M AH2-0306L-005-M AH2-0308L-007-M AH2-0310L-007-M AH2-0312L-011-M AH2-0504L-005-M AH2-0506L-011-M AH2-0508L-011-M AH2-0510L-015-M AH2-0512L-022-M AH2-1003L-011-M AH2-1004L-015-M AH2-1006L-022-M AH2-1503L-022-M AH3-0304L-003-M AH3-0306L-005-M AH3-0308L-007-M AH3-0310L-007-M AH3-0312L-011-M AH3-0504L-005-M AH3-0506L-011-M AH3-0508L-011-M AH3-0510L-015-M AH3-0512L-022-M AH3-1003L-011-M AH3-1004L-015-M AH3-1006L-022-M AH3-1503L-022-M AH1-0304L-007-M AH1-0306L-011-M AH1-0308L-015-M AH1-0310L-022-M AH1-0312L-022-M AH1-0504L-011-M AH1-0506L-015-M AH1-0508L-022-M AH1-0510L-022-M AH1-0512L-022-M AH1-1003L-011-M AH1-1004L-015-M AH1-1006L-022-M AH1-1503L-022-M AH2-0304L-007-M AH2-0306L-011-M AH2-0308L-015-M AH2-0310L-022-M AH2-0312L-022-M AH2-0504L-011-M AH2-0506L-015-M AH2-0508L-022-M AH2-0510L-022-M AH2-0512L-022-M AH2-1003L-011-M AH2-1004L-015-M AH2-1006L-022-M AH2-1503L-022-M AH3-0304L-007-M AH3-0306L-011-M AH3-0308L-015-M AH3-0310L-022-M AH3-0312L-022-M AH3-0504L-011-M AH3-0506L-015-M AH3-0508L-022-M AH3-0510L-022-M AH3-0512L-022-M AH3-1003L-011-M AH3-1004L-015-M AH3-1006L-022-M AH3-1503L-022-M
Product Images

Approval Holder:
Dutypoint Ltd.
Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334
General Email
austin.hill@dutypoint.com

View All Listings by this Company

Print This Approval


#241004726

Range of horizontal multistage close coupled centrifugal pumps incorporating stainless steel cased bodies and impellers. Maximum working pressure: See models. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
241004726
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F) - 3” BSP (F). DN40 - DN80 flange.
Marking:
Calpeda and technical info on data plate.
Installation Requirements:
R001 R415
Expiry date:
31/10/2029
Model:
MXH Series: (304 stainless models) MXH/MXHM 202, 203, 204, 205, 206 – 1 ¼” x 1” – 8 bar. MXH/MXHM 402, 403, 404, 405, 406 – 1 1/2” x 1” – 8 bar. MXH/MXHM 802, 803, 804, 805 – 2 ¼” x 1 1/2” – 8 bar. MXH/MXHM 1602, 1603, 1604, 1605, 1606 – 2 ¼” x 1 1/2” – 8 bar. MXH/MXH-F 2001, 2002, 2003, 2004, 2005 – 2 ¼” x 1 1/2” – 10 bar. MXH/MXH-F 3201, 3202, 3203, 3204 – 2 1/2” x 2” – 10 bar. MXH/MXH-F 4801, 4802, 4803 – 3” x 2 1/2” – 10 bar. (316 stainless models) MXHL/MXHLM 202, 203, 204, 205, 206 - 1 ¼” x 1” – 8 bar. MXHL/MXHLM 402, 403, 404, 405, 406 - 1 ¼” x 1” – 8 bar. MXHL/MXHLM 802, 803, 804, 805 - 1 1/2” x 1” – 8 bar. ‘F’ in the code indictates flanged connection. There are four numbers to identify pump’s size: the first two indicate the flow rate (in m3/h); the second two indicate the number of stage (ex. Mxh 3204: 32 m3/h, 4 stages; mxh 203: 2 m3/h, 3 stages) A letter may be added at the end of the pump model to identify the current motor model fitted to the pump e.g. MXH203* where * can be E, /A, /B, /C etc. Example MXH203/A, MXH204/B etc.
Product Images

Approval Holder:
Calpeda S.p.A
Company Name
Calpeda S.p.A
Address
Via Roggia Di Mezzo 39 36050 Montoro Vicentino Vicenza
Country
Italy

View All Listings by this Company

Print This Approval


#241002708

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
241002708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:
U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:
Pentax logo, model code and other technical information on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/10/2029
Model:
ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.
Product Images

Approval Holder:
PENTAX INDUSTRIES SpA
Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company
Manufacturer:
PENTAX INDUSTRIES SpA
Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 159 of 215

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.