Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240602069

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240602069
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: SHS on end connections.
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Approval Holder:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

WRAS Approval Number: #240504023

Range of automatic air venting valves with plastic bodies and EPDM ‘O’-rings. Maximum working pressure 6.0 bar. Maximum operating temperature 99°C.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 240504023
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: For close circuit use only.
Size:: See models.
Marking:: Caleffi logo moulded on cap.
Installation Requirements:: R001 R200
Expiry date:: 31/05/2029
Model:: 49513: 20.9mm pushfit manifold, C502433 CST: ⅜” BSP (M), C502600 CST: 19.9mm pushfit manifold, C502601 CST: 20.9mm pushfit manifold, C502604 PLY: 17.7mm pushfit manifold, C502630 CST: ⅜” BSP (M), C502631 CST: ⅜” BSP (M), C502633 CST: ⅜” BSP (M), C502640 CST: ½” BSP (M), C502644 CST: ½” BSP (M), C502634 CST: ⅜” BSP (M).

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

WRAS Approval Number: #2301096

Range of air release valves with blue epoxy coated ductile iron bodies and EPDM seats. Maximum working pressure 16.0 bar

Non-metallic materials and components comply with BS6920 at 80°C

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 2301096
Size:: DN50, DN80, DN100, DN150, DN200, DN300 flanged.
Marking:: AFC) Suzhou Alpine Flow Control Co., Ltd Logo, DN, PN and other technical Info on body.
Installation Requirements:: R001 R120
Expiry date:: 31/01/2028
Model:: KARX series

Approval Holder:: AFC Valves Malaysia SDN BHD

Company Name
AFC Valves Malaysia SDN BHD
Address
26 Jalan Sungai Jeluh
Postcode
shah Alam

View All Listings by this Company

WRAS Approval Number: #240902061

Range of single/double orifice air venting valves with blue epoxy coated ductile iron bodies, and a stainless-steel float ball. Incorporating EPDM washers. Maximum working pressure 16.0 Bar. Maximum operating temperature 80.0°C.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 240902061
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 3” - BSP (F). DN80, DN100 & DN150 - Flanged.
Marking:: AFFCO logo, DN, PN, date of manufacture (MM/YYYY) and other technical data on data plate on body.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: S824

Approval Holder:: AFFCO Flow Control (Shanghai) Co. Ltd.

Company Name
AFFCO Flow Control (Shanghai) Co. Ltd.
Address
Fengxian District, No.99, Desheng Road, Fengcheng Town Shanghai City, China

View All Listings by this Company
Manufacturer:: AFFCO Flow Control (Shanghai) Co. Ltd.

Company Name
AFFCO Flow Control (Shanghai) Co. Ltd.
Address
Fengxian District, No.99, Desheng Road, Fengcheng Town Shanghai City, China

View All Listings by this Company

WRAS Approval Number: #240904024

Range of T-type thermostatic blending valves with nickel plated brass bodies and EPDM ‘O’-rings. The inlet and outlet incorporate an approved check valve cartridge ((verified by test - suitable for backflow protection against fluid category 2). Models with compression ends are to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 240904024
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Company logo, flow, mix, H&C moulded on body. Company logo Ivanci printed on cap, CR etched on inlet connection
Installation Requirements:: R001 R010 R040
Expiry date:: 30/09/2029
Model:: U0121.G15.0002-0000: ½” BSP (M) U0121.G20.0002-0000: ¾” BSP(M) U0121.015.0002-0000: 15mm compression

Approval Holder:: Zhejiang Fansheng Fluid Control Co., LTD

Company Name
Zhejiang Fansheng Fluid Control Co., LTD
Address
Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province
Postcode
317605
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Fansheng Fluid Control Co., LTD

Company Name
Zhejiang Fansheng Fluid Control Co., LTD
Address
Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province
Postcode
317605
Country
China

View All Listings by this Company

WRAS Approval Number: #240102095

Range of blue epoxy coated butterfly valves with stainless steel discs and EPDM seal. Maximum operating pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 240102095
Size:: DN50, DN65, DN 80, DN 100, DN 125, DN 150, DN 200, DN 250, DN 300, DN 350, DN 400, DN 450 & DN500 flanged.
Marking:: Company logo on metal data plate. Size on body.
Installation Requirements:: R001
Expiry date:: 31/01/2029
Model:: KBFVWR16

Approval Holder:: Kids Pipe Accessories LLC

Company Name
Kids Pipe Accessories LLC
Address
44 SVETI KNIAZ BORIS I ST. 5100 GORNA ORYAHOVITZA
Country
Bulgaria

View All Listings by this Company

WRAS Approval Number: #2304376

Range of butterfly valves with ductile iron bodies (blue epoxy coating), stainless steel disc and EPDM seat. The valves are operated by a lever mechanism. Maximum working pressure 20.0 bar. Cold water use only.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 2304376
Size:: DN40 - 300.
Marking:: 4 MATIC, model number, pressure, size, date of manufacture (DD.MM.YY) and other technical information on data plate on body.
Installation Requirements:: R001
Expiry date:: 30/04/2028
Model:: 4MRECO (WAFER TYPE) RANGE OF BUTTERFLY VALVE: DN 40-300 4MRDWF (DOUBLE FLANGE) RANGE OF BUTTERFLY VALVE: DN 40-300 4MRFLB (LUG TYPE) RANGE OF BUTTERFLY VALVE: DN 40-300

Approval Holder:: AIRA 4MATIC GLOBAL VALVE AUTOMATION PVT LTD

Company Name
AIRA 4MATIC GLOBAL VALVE AUTOMATION PVT LTD
Address
PLOT NO 174 382405
Country
India

View All Listings by this Company

WRAS Approval Number: #240602070

Range of butterfly valves with blue epoxy coated, ductile iron bodies and either blue epoxy coated ductile iron or stainless-steel discs and EPDM seats and ‘O’-rings. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 240602070
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000 & DN1200 Flanged
Marking:: Famat (Brand of SAPAG), Model, Size and PN on metal dataplate on body.
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: JMC BC3 LB

Approval Holder:: SAPAG VALVES

Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Country
France
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company

WRAS Approval Number: #240904004

Range of wafer and fully lugged butterfly valves with a blue epoxy coated cast iron bodies, EPDM seat and a stainless steel (2302/2502 models) or chrome plated iron disc 2304/2504 models). Products are either handwheel (H) or gear (G) operated (see models). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 240904004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Weflo or Weilong, DN, PN moulded on body, Welfo or Weilong, Model No, size, WRAS, other technical info on data label on body
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: 2302-00-H DN50-300 2302-00-G DN50-600 2304-00-H DN50-300 2304-00-G DN50-600 2502-00-H DN50-300 2502-00-G DN50-600 2504-00-H DN50-300 2504-00-G DN50-600

Approval Holder:: WEFLO Valve Co., Ltd.

Company Name
WEFLO Valve Co., Ltd.
Address
No 789 Chunyang Road, Qingdao National High-Tech Industrial Development Zone, Qingdao, Shandong
Country
China

View All Listings by this Company
Manufacturer:: WEFLO Valve Co., Ltd.

Company Name
WEFLO Valve Co., Ltd.
Address
No 789 Chunyang Road, Qingdao National High-Tech Industrial Development Zone, Qingdao, Shandong
Country
China

View All Listings by this Company

WRAS Approval Number: #240902040

Ranges of wafer or lugged butterfly valves with blue epoxy coated ductile iron bodies incorporating EPDM seat. The valves can be supplied with either Stainless steel, Nickel or blue epoxy coated ductile iron discs. Maximum working pressure: 16.0bar. Maximum operating temperature: 85°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 240902040
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN50 – DN800 Flange connections.
Marking:: Hebei Yuanfeng valve co,ltd, Model number, Size, PN and product info on plate on body. PN and Size on body.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: YFBVA-01 (wafer), YFBVL-01 (lugged).

Approval Holder:: Hebei Yuanfeng Valve Co.,Ltd.

Company Name
Hebei Yuanfeng Valve Co.,Ltd.
Address
Southeast of the intersection of Weiyi Street and Jinger Road, Dacaozhuang Administrative Xingtai City, Hebei Province,China

View All Listings by this Company