Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250615011

AQUAPRO range of angled valves with chromium plated brass bodies, incorporating a non-rising spindle headwork or a quarter turn ceramic disc headwork with either cubic, single lever or dome type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: AQUAPRO on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Non-rising spindle head with dome type operating members: AP5253R: ½” BSP (M) x ½” BSP (M), AP5253R: ½” BSP (M) x ⅜” BSP (M), ¼ turn ceramic disc headwork with single lever operating member: AP5253L: ½” BSP (M) x ½” BSP (M), AP5253L: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with cubic operating member: AP5253S: ½” BSP (M) x ½” BSP (M), AP5253S: ½” BSP (M) x ⅜” BSP (M), AP5253O: ½” BSP (M) x ½” BSP (M), AP5253O: ½” BSP (M) x ⅜” BSP (M).

Product Images

Approval Holder:: Ultimate Trading Co(L.L.C.)

Company Name
Ultimate Trading Co(L.L.C.)
Address
No 2 Street 13D Nakheei Road, Deira Dubai
Country
U.A.E

View All Listings by this Company

WRAS Approval Number: #250688003

Range of threaded copper pipe elbow tap unions. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 250688003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Water works on adhesive label.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 100733 - 14mm x 1/2" BSP captive nut 100775 - 14mm x 1/2" BSP captive nut 100734 - 18mm x 3/4" BSP captive nut 100776 - 18mm x 3/4" BSP captive nut

Approval Holder:: Waterworks Ltd

Company Name
Waterworks Ltd
Address
60 Backus Ave. Danbury
Postcode
CT06810
Country
United States
Phone
2035466207
General Email
mary.kimlinger@waterworks.com

View All Listings by this Company

WRAS Approval Number: #241002724

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002724
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: CWMA3 & CWMA5 : 1” BSP (F) inlet x 1” BSP (F) outlet. CWMA7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. CWMA9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. CWMA18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Winflo logo, model code and product technical information on data-plate.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: CMWA range model code: CMWAXX-Y(T) CMWA = Pump type. XX = Nominal flow rate m/3 per hour (3, 5, 7, 9 or 18). Y = Number of impellers. T = 3 phase or (blank) = single phase. CMWA3-2, CMWA3-3, CMWA3-4, CMWA3-5, CMWA3-6 & CMWA3-7. CMWA5-2, CMWA5-3, CMWA5-4, CMWA5-5, CMWA5-6 & CMWA5-7. CMWA7-2, CMWA7-3, CMWA7-4, CMWA7-5 & CMWA7-6. CMWA9-2, CMWA9-3, CMWA9-4 & CMWA9-5. CMWA3-2T, CMWA3-3T, CMWA3-4T, CMWA3-5T, CMWA3-6T & CMWA3-7T. CMWA5-2T, CMWA5-3T, CMWA5-4T, CMWA5-5T, CMWA5-6T & CMWA5-7T. CMWA7-2T, CMWA7-3T, CMWA7-4T, CMWA7-5T, CMWA7-6T & CMWA7-7T. CMWA9-2T, CMWA9-3T, CMWA9-4T & CMWA9-5T. CMWA18-2T, CMWA18-3T & CMWA18-4T.

Approval Holder:: Eautechnik GmbH

Company Name
Eautechnik GmbH
Country
Germany

View All Listings by this Company

WRAS Approval Number: #250304731

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Maximum operating pressure 3.8 bar. Maximum operating temperature 65°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250304731
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm pushfit
Marking:: Bristan and product info on label
Installation Requirements:: R001 R415
Expiry date:: 31/03/2030
Model:: Maximum working pressure 3.8 bar: ST PUMP15TN / 232650 ST PUMP20TN / 232653 ST PUMP20SG / 232651

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #250302723

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The DPV(M/S) models and DPV(S) models can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: DPV models 10.0 bar, DPVM models with an oval flange or VME models with integral check valve 16.0 bar, All other DPVM models 25.0 bar. DPV(S) models with an oval flange or DPV(S)(E) models with integral check valve 16.0 bar, All other DPV(S) models and DPH(S)I models 25.0 bar. Maximum operating temperatures: DPHM, DPVE and DPVME models with integral check valve 60°C, all other model variants 100°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250302723
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DPHM 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. DPV(M/S)(F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. DPV(S) (F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. DPV(S)F 25/40/60/85/125 B: Round flange: DN65, DN80, DN100, DN125. DPH(S)I 2/4/6 B: 1¼” BSP or NPT (F). DPH(S)I 10/15 B/C: 2” BSP or NPT (F).
Marking:: DPVF & logo, model name, PN, WRAS and technical information on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2030
Model:: DPHM x yy B. Where: x = flow rate m³/h (2, 4 or 6). yy = no. of stages ranges 1-6 stages. ------------------------------------- DPV(M/S)(F/E/V/T) x yy B/C Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages DPV(M/S)(F/E/V/T)……2 B 1-30 stages. DPV(M/S)(F/E/V/T)……4/6 B 1-26 stages. DPV(S)(F/E/V/T)……10 B 1-21 stages. DPV(S)(F/E/V/T)……15 B/C 1-17 stages. -------------------------------------- DPV(S) F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90(model 85) or 125). yy = no. of stages ……25 B 1-12 stages. ……40/60 B 1-10 stages. ……85 B 1-6 stages. ……125 B 1-4 stages. -------------------------------------- DPHI x yy = Vertically oriented (AISI 304). DPHSI x yy = Vertically oriented (AISI 316). Where: I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages DPH(S)I 2/4/6 B 1-14 stages. DPH(S)I 10 B/15 B/15 C 1-8 stages.

Approval Holder:: Duijvelaar Pompen B.V.

Company Name
Duijvelaar Pompen B.V.
Address
Kalkovenweg 13 2401 LJ Alpen aan den Rijn
Country
Netherlands
Phone
0031 0172 488388

View All Listings by this Company