Directory Search Results

Print List

#240604001

Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1820 Taps
Section Subtitle:
Self closing tap(s).
WRAS Approval Number:
240604001
Size:
Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Inta on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2029
Model:
NC230CP
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
Idral S.p.A.
Company Name
Idral S.p.A.
Address
Via Isei, 8/10 - I-28010 Gargallo (NO)
Country
Italy
Phone
+39 0322 912017
General Email

View All Listings by this Company

Print This Approval


#240702058

Range of stainless-steel braided TPS lined flexible hose assemblies incorporating EPDM or fibre washers. The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves Push-fit fittings for use with: Copper Pipes manufactured in accordance with BS EN 1057 PB pipes manufactured in accordance with BS 7291-2 PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure 12.0 bar. Maximum operating temperature 65°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
240702058
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Qualflex, QWRAS, year of manufacture (YY) and temperature and pressure on ferrule.
Installation Requirements:
R001 R008
Expiry date:
31/07/2029
Model:
06PP 08PP 10PP 12PP Plastic Qualflex Pushfit: 15mm - 22mm Polypipe Pushfit: 15mm & 22mm John Guest Pushfit: 15mm & 22mm Qualflex Valved Pushfit: 15mm - 22mm Flat faced Straight: 1/2" - 3/4" BSP captive nut Flat faced Straight: 1/2" - 3/4" BSP captive nut Standpipe: 6mm - 15mm Flat Faced Female Elbow: 3/4" BSP captive nut Retained Female Straight: 1/2" - 3/4" BSP captive nut Retained Female Straight: 1/2" - 3/4" BSP captive nut Retained Female Elbow: 3/4" BSP captive nut Brass Brass Pushfit: 10mm - 15mm Qualflex pushfit: 10mm - 22mm Compression with Iso Valve: 15 & 22mm Compression: 15mm - 28mm Flat Faced Straight: 3/8” - 1.1/4" BSP captive nut. Flat Faced Female Elbow: 3/8" - 1" BSP captive nut Retained Female Straight: 3/8" - 3/4" BSP captive nut. Retained Female Elbow: 3/8" - 3/4" BSP captive nut Coned Female Straight: 1/4" - 1/2" BSP captive nut Coned Female Elbow: 1/4" - 1/2" BSP captive nut Female Straight: 7/16" UNF Captive nut Male Straight: 1/4" - 1” BSP Male Straight: 3/8" NPT Standpipe: 3/8" & 10mm - 28mm Monoblock: M8, M10 & M12
Product Images

Approval Holder:
Hydralectric Group Ltd.
Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company
Manufacturer:
Hydralectric Group Ltd.
Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

Print This Approval


#240702059

‘Qualflex Excel’ range of stainless steel over braided, PEX lined flexible hoses, incorporating EPDM or fibre washers. The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves. Push-fit fittings for use for with: Copper Pipes manufactured in accordance with BS EN 1057 Plastic PB pipes manufactured in accordance with BS 7291-2 Plastic PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure: 6.0 bar. Maximum operating temperature: 65°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
240702059
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Qualflex, QWRAS, year of manufacture (YY) and temperature and pressure on ferrule.
Installation Requirements:
R001 R008
Expiry date:
31/07/2029
Model:
06PEX 08PEX 10PEX 12PEX Plastic Qualflex Pusfit: 15 - 22mm Polypipe Pushfit: 15 & 22mm John Guest Pushfit: 15 & 22mm Qualflex Valved Pushfit: 15 - 22mm Flat faced Straight: 1/2" & 3/4" BSP captive nut Flat faced Straight: 1/2" & 3/4" BSP captive nut Standpipe: 6mm - 15mm Flat Faced Female Elbow: 3/4" BSP captive nut Retained Female Straight: 1/2" & 3/4" BSP captive nut Retained Female Straight: 1/2" & 3/4" BSP captive nut Retained Female Elbow: 3/4" BSP captive nut Brass Pushfit: 10mm - 15mm Qualflex pushfit: 10mm - 22mm Compression with Iso Valve: 15 & 22mm Compression: 15 - 28mm Flat Faced Straight: 3/8” - 1.1/4" BSP captive nut. Flat Faced Female Elbow: 3/8" - 1" BSP captive nut Retained Female Straight: 3/8" - 3/4" BSP captive nut. Retained Female Elbow: 3/8" - 3/4" BSP captive nut Coned Female Straight: 1/4" - 1/2" BSP captive nut Coned Female Elbow: 1/4" - 1/2" BSP captive nut Female Straight: 7/16" UNF Captive nut Male Straight: 1/4" - 1” BSP Male Straight: 3/8" NPT Standpipe: 3/8" & 10mm - 28mm Monoblock: M8, M10 & M12

Approval Holder:
Hydralectric Group Ltd.
Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

Print This Approval


#241004022

Range of multilayer PVC hoses. Maximum operating temperature 65°C. Open outlet use only.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
241004022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (F) x 1/2” BSP (F)
Marking:
Justlink, WRAS, manufactuer year (YYYY) etched on shower nut
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
JL-A*B-OD-X-B Black plastic shower hose JL-A*B-OD-X-W White plastic shower hose JL-A*B-OD-X-G Golden plastic shower hose JL-A*B-OD-X-Gr Grey plastic shower hose JL-A*B-OD-X-S Silver plastic shower hose JL-A*B-OD-X-P Pink plastic shower hose JL-A*B-OD-X-Ndr Nickel-drawing plastic shower hose JL-A*B-OD-X-C-XXX A denotes end connection and is replaced with: A1 = F½” Swivel nut. A2 = F½” Fixed nut. A3 = F½” swivel nut with O‐ring. A4 = F½” round nut. B denotes end connection and is replaced with: B1 = F½” Swivel nut. B2 = F½” Fixed nut. B3 = F½” swivel nut with O‐ring. B4 = F½” round nut. OD denotes external diameter of hose and is replaced with: 14 and 16, 14 denotes OD14, 16 denotes OD16. X denotes the internal liner material PEX. C denotes the color of the external layer of shower hose and is replaced with: B = Black W = White G = Golden Gr = Grey S = Silver P = Pink Ndr = Nickel Drawing(brushed nickel) XXX denotes the length in centimetre between 050 and 200.
Product Images

Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan
Postcode
317600
Country
China
Phone
86-576-89901684

View All Listings by this Company

Print This Approval


#240202086

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240202086
Size:
See Models
Marking:
Hydraflex Logo, Size, & WRAS on ferrule.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
W-TAPTAILXXF W-TAPXXFF W-TAPXXMF W-TAPXXMM W-TAPXXFE W-TAPXXME W-TAPTAILXX W-TAPXX W-TAPXXV W-TAPXXMB XX will be replaced with the appropriate size of fitting.

Approval Holder:
Hydraflex Plumbing & Cooling Hoses Ltd.
Company Name
Hydraflex Plumbing & Cooling Hoses Ltd.
Address
11 Stirling Park Laker Road Rochester Kent
Postcode
ME1 3QR
Country
United Kingdom
General Email
rochester@Hydraflex.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 144 of 189

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.