'Maxline 100 Potable Water Coating Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDSMLI100.rv5.04042023'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205574

Expiry date:

31/05/2027

Approval Holder:

Maxkote Ltd.

Company Name

Maxkote Ltd.

Address

Clifton Moor, York

Postcode

YO30 4XL

Phone

+44 1904 809 773

General Email

info@maxkote.co.uk

View All Listings by this Company

'Lionpak® 2300’. Grey coloured, braided GFO gland packing. For use with water up to 85°C. For use only as a gland packing material having been tested at a reduced surface area to volume ratio.

Section:

5100 Gland Packings

Expiry date:

29/02/2028

Approval Holder:

James Walker & Co Ltd (Cockermouth)

Company Name

James Walker & Co Ltd (Cockermouth)

Address

Compression Packing Laboratory Gote Brow Cockermouth

Postcode

CA13 0NH

Country

Cumbria

Phone

+ 44 (0)1900 823555 Fax: 01900 827138 Telex: 64168

General Email

cockermouth@jameswalker.biz

View All Listings by this Company

'Atlac 430'. Yellow coloured, vinyl ester resin material manufactured by filament winding. For use with water up to 60°C.

Section:

5125 Glass Reinforced Plastics (GRP)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2212541

Expiry date:

31/12/2027

Approval Holder:

Jinling AOC Resins Co., Ltd.

Company Name

Jinling AOC Resins Co., Ltd.

Address

No.188, Chong Fu Road, Nanjing Chemical Industry Park, Nanjing, Jiangsu

View All Listings by this Company

'CELANYL A3 WR GF30 NC 1102/Z/FA'. Natural (appears cream in colour), injection moulded polyamide material manufactured in Celanese(Suzhou) Engineering Plastics Co. LTD (China), & Celanese Production Germany GmbH &Co (Utzenfeld –Germany. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2302523

Expiry date:

29/02/2028

Approval Holder:

Celanese Sales Germany GmbH

Company Name

Celanese Sales Germany GmbH

Address

Am Unisys Park 1, 65843 Sulzbach am Taunus

Country

Germany

View All Listings by this Company

'Denyl 66 3010 Natural F' & 'Denyl 66 3010 Black F'. Natural (appears off-white) and black coloured, injection moulded, Polyamide 66 materials. For use with water up to 65°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2303538

Expiry date:

31/03/2028

Approval Holder:

Vamp-Tech S.p.A

Company Name

Vamp-Tech S.p.A

Address

Via delle Industrie 10/12, Busnago (MB), 20874

Country

Italy

View All Listings by this Company