Leak detection system, comprising of a flow sensor with a stainless-steel body incorporating a motorised spherical valve, with a stainless-steel ball. Please note that claims of leak detection have not been verified by WRAS. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

250402049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Please note that claims of leak detection have not been verified by WRAS.

Size:

¾” BSP (M) inlet and outlet.

Marking:

HLP-4 on valve body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

9015-B.

Approval Holder:

Harrison Land & Property Ltd.

Company Name

Harrison Land & Property Ltd.

Address

11-12 Hallmark Trading Centre, Fourth Way, Wembley, Middlesex

Postcode

HA9 0LB.

Country

United Kingdom

View All Listings by this Company

Range of installation kits comprising of a water block, double check valve assembly (suitable for backflow protection against fluid category 3) and a pressure reducing valve (outlet pressure range 3.0 to 3.5 bar). Model 95428 incorporates a water filter. Maximum working pressure: 16 Bar Maximum operating temperature: 23°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

250402710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

There are two Installation Kits for the InstaTap Range, the InstaTap Installation kit that supports boiling, boiling and chilled and the Chilled Only InstaTap Installation Kit. These kits include an install rail that is a combination of double check valves, water block and prv, this acts as the product’s backflow prevention. They also include the fittings required to fit the install rail to the mains inlet into the InstaTap. The Chilled Only kit includes a filter

Size:

see model

Marking:

Zip on water block, Zip, product info on filter

Installation Requirements:

R001 R008 R170 R290

Expiry date:

30/04/2030

Model:

95201: Chilled Install Rail (15mm spigot x ¾” BSP F) 95565: Install Rail (15mm spigot x ¾” BSP M) PRV – Art.232.991: Pressure Reducing Valve (3/4” (F) x ¾” BSP M)) 95428: Chilled InstaTap Installation Kit (15mm spigot x ¾” BSP F) 95402: InstaTap Installation Kit (15mm spigot x ¾” BSP F)

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Manufacturer:

Instanta Ltd

Company Name

Instanta Ltd

Address

Canning Road Southport Merseyside

Postcode

PR9 7SN

Phone

01704 501114

General Email

View All Listings by this Company

Ranges of sensor operated flow control devices either mains or battery powered, incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm Spigot inlet x 1/2" BSP (M) outlet

Marking:

"D" logo & Dolphin on sensor unit.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

DB6220-aaa-bb/DB6225-aaa-bb DB620-aaa-bb /DB625-aaa-bb DB6210-aaa-bb /DB6215-aaa-bb DB6240-aaa-bb /DB6245-aaa-bb DB6250-aaa-bb /DB6255-aaa-bb DB6280-aaa-bb /DB6285-aaa-bb ‘0’ models (DBxx[x]0-xxx-xx) are 9V mains powered. '5' models (DBxx[x]5-xxx-xx) are 9V battery powered. ‘aaa’ denotes the external surface finish. ‘bb’ denotes the external surface colour.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

General Email

Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” BSPT (M)

Marking:

HNH Logo, 85°C WRAS, 120°C

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Fig 631 Pressure Test Points

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of ‘Tcontrols’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD

Marking:

"Tcontrols" logo, Model, Voltage, Size and other information on cap.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:

Thermowatt S.p.A.

Company Name

Thermowatt S.p.A.

Address

Via San Giovanni Battista 21 Arcevia

Postcode

60011

Country

Italy

Phone

+39 0731988246

General Email

thermowatt@legalmail.it

View All Listings by this Company