Range of two hole, double outlet (swivel) combination tap assemblies (chrome plated brass). (T-695 series) Incorporates quarter turn ceramic disc headworks with single lever operating members. (T-695M series) incorporates non-rising spindle headworks and dome or cross top type operating members (T-695M). The spout outlets incorporate a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0570 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250404009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½" BSP (M)

Marking:

T.K. on rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2030

Model:

T-695-H1 T-695-H2 T-695-H3 T-695-H4 T-695M-H1 T-695M-H2 T-695M-H3 T-695M-H4 T-695MH5

Approval Holder:

Tsangkuo Industrial Co Ltd

Company Name

Tsangkuo Industrial Co Ltd

Address

27 Lane 22, Chang Ting Road, Lukang

Country

Chang Hua,

View All Listings by this Company

Manufacturer:

Tsangkuo Industrial Co Ltd

Company Name

Tsangkuo Industrial Co Ltd

Address

27 Lane 22, Chang Ting Road, Lukang

Country

Chang Hua,

View All Listings by this Company

Range of three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with either single lever, dome, wheel or cross top operating members. The headworks are connected to the spout with stainless steel braided braided PEX lined flexible hose assemblies. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250404018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP (F) captive nut end connections.

Marking:

Graff logo on back plate.

Installation Requirements:

R001 R006 R007 R009 R010

Expiry date:

30/04/2030

Model:

E-11310-xx-yy - Vintage – Three hole wash basin mixer E-6310-xx-yy - Onda – Three hole wash basin mixer E-11610-R3**-xx-yy - Vignola – Three hole wash basin mixer E-11610-R4**-xx-yy - Vignola – Three hole wash basin mixer E-11612-R3**-xx-yy - Vignola – Three hole wash basin mixer E-11612-R4**-xx-yy - Vignola – Three hole wash basin mixer E-6710N-xx-yy - Harley - Three hole wash basin mixer E-6710-xx-yy - Harley - Three hole wash basin mixer E-6711N-xx-yy - Harley - Three hole wash basin mixer E-6711-xx-yy - Harley - Three hole wash basin mixer E-6111N-xx-yy - Harley/ME - Three hole wash basin mixer E-6111-xx-yy - Harley/ME - Three hole wash basin mixer E-11510-R1**-L1-yy - MOD+ - Three hole wash basin mixer (short spout) E-11511-R1**-L1-yy - MOD+ - Three hole wash basin mixer (long spout) E-11512-R1**-L1-yy - MOD+ - Three hole wash basin mixer (round spout) E-11510-R2**-L1-yy - MOD+ - Three hole wash basin mixer (short spout) E-11511-R2**-L1-yy - MOD+ - Three hole wash basin mixer (long spout) E-11512-R2**-L1-yy - MOD+ - Three hole wash basin mixer (round spout) R3** after new code denotes kind of handle cover which is brass with finish ‘yy’ R4** after new code denotes kind of handle cover which is marble stone with three different colors: white, black, green. R4MB - Storm Black Marble R4MW - Smoky White Marble R4MG - Forest Green Marble N - after new code denotes kind in the Harley it means the product does not have pop-up waste R1** after new code denotes kind of handle material which is brass with finish ‘yy’ R2** after new code denotes kind of handle material which is marble stone with three different colors: white, black, green. R2MB - Storm Black Marble R2MW - Smoky White Marble R2MG - Forest Green Marble xx’ after the new code denotes handle designation and can be replaced with: C18B for Vintage model LM56B for Vintage model LM42B for Onda model LM48B for Camden model LM58B for Onda model LM59B for Onda model LM61B for Onda model C16B for Camden model LM60B for Vignola model C20B for Vignola model LM41B for ME model LM57B – for Harley model C19B – for Harley model C17B for ME model LM62B for ME model LM47B for Finezza Uno model C15B for Finezza Uno model ‘yy’ at the end of model denotes finish, and can be replaced with: PC: Polished Chrome, BNi: Brushed Nickel, PN: Polished Nickel, WT: Matte White, BK: Architectural Black, MBK: Matte Black, SN: Steelnox, OB: Olive Bronze, VBB: Vintage Brushed Brass, PB: Polished Brass PVD, BB: Brushed Brass PVD, PG: Polished Gold PVD, BG: Brushed Gold PVD, SG: Satin Gold PVD, PNP: Polished Nickel PVD, BNP: Brushed Nickel PVD, OX: Onyx PVD, BOX: Brushed Onyx PVD, WB: Warm Bronze PVD, RG: Polished Copper PVD, BRG: Brushed Copper PVD, PRB: Polished Tuscan Bronze PVD, BRB: Brushed Tuscan Bronze PVD, GM: Gun Metal, AU: Polished Gold 24k, BAU: Brushed Gold 24k.

Approval Holder:

Graff Faucets Co.

Company Name

Graff Faucets Co.

Address

3701 W. Burnham St. Milwaukee, WI 5315

Country

USA

Phone

+1 414.649.9850

General Email

techsupport@graff-faucets.com

View All Listings by this Company

Wall mounted spout outlet (Chrome finish). The spout outlet incorporates a plastic aerator. Open outlet use only. Maximum operating temperature 60.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

250402033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

Dornbracht logo on body

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

13801660

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Floor standing spout outlet (chromium plated brass) to be used with concealed body 3594597090. Open outlet

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

250602002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Specifically for use with Dornbracht product “3594597090” which has ½” BSP (F) inlets

Marking:

Dornbracht logo on base plate

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2030

Model:

13672780 3594597090

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

‘LFLF10xx’ range of stainless steel press-fit fittings incorporating EPDM ‘O’-rings for use with ‘LFLP1001’ stainless-steel pipe. Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250415017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

LOFFREY, material code and size on fitting body. LOFFREY, material code, size, EN 10312 and date of manufacture (YYYY/M/D) on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Equal Coupling: LFLF1001-15: 15mm, LFLF1001-18: 18mm, LFLF1001-22: 22mm, LFLF1001-28: 28mm, LFLF1001-35: 35mm, LFLF1001-42: 42mm, LFLF1001-54: 54mm, LFLF1001-65: 76.1mm, LFLF1001-80: 88.9mm, LFLF1001-100: 108mm. Reducer Coupling-A: LFLF1002-018015: 18mm×15mm, LFLF1002-022015: 22mm×15mm, LFLF1002-022018: 22mm×18mm, LFLF1002-028015: 28mm×15mm, LFLF1002-028018: 28mm×18mm, LFLF1002-028022: 28mm×22mm, LFLF1002-035015: 35mm×15mm, LFLF1002-035018: 35mm×18mm, LFLF1002-035022: 35mm×22mm, LFLF1002-035028: 35mm×28mm, LFLF1002-042015: 42mm×15mm, LFLF1002-042018: 42mm×18mm, LFLF1002-042022: 42mm×22mm, LFLF1002-042028: 42mm×28mm, LFLF1002-042035: 42mm×35mm, LFLF1002-054042: 54mm×42mm. Reducer Coupling-B: LFLF1003-018015: 18mm×15mm, LFLF1003-022015: 22mm×15mm, LFLF1003-022018: 22mm×18mm, LFLF1003-028015: 28mm×15mm, LFLF1003-028018: 28mm×18mm, LFLF1003-028022: 28mm×22mm, LFLF1003-035015: 35mm×15mm, LFLF1003-035018: 35mm×18mm, LFLF1003-035022: 35mm×22mm, LFLF1003-035028: 35mm×28mm, LFLF1003-042015: 42mm×15mm, LFLF1003-042018: 42mm×18mm, LFLF1003-042022: 42mm×22mm, LFLF1003-042028: 42mm×28mm, LFLF1003-042035: 42mm×35mm, LFLF1003-054015: 54mm×15mm, LFLF1003-054018: 54mm×18mm, LFLF1003-054022: 54mm×22mm, LFLF1003-054028: 54mm×28mm, LFLF1003-054035: 54mm×35mm, LFLF1003-054042: 54mm×42mm. Adjustable coupling: LFLF1004-15: 15mm, LFLF1004-18: 18mm, LFLF1004-22: 22mm, LFLF1004-28: 28mm, LFLF1004-35: 35mm, LFLF1004-42: 42mm, LFLF1004-54: 54mm, LFLF1004-65: 76.1mm, LFLF1004-80: 88.9mm, LFLF1004-100: 108mm. Female coupling: LFLF1005-15×Rp1/2: 15mm×Rp1/2, LFLF1005-22×Rp3/4: 22mm×Rp3/4, LFLF1005-28×Rp1: 28mm×Rp1, LFLF1005-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1005-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1005-54×Rp2: 54mm×Rp2. Male coupling: LFLF1006-15×R1/2: 15mm×R1/2, LFLF1006-18×R1/2: 18mm×R1/2, LFLF1006-22×R3/4: 22mm×R3/4, LFLF1006-28×R1: 28mm×R1, LFLF1006-35×R1‐1/4: 35mm×R1-1/4, LFLF1006-42×R1‐1/2: 42mm×R1-1/2, LFLF1006-54×R2: 54mm×R2. Rotatable coupling: LFLF1007-15×G1/2: 15mm×G1/2, LFLF1007-18×G1/2: 18mm×G1/2, LFLF1007-22×G3/4: 22mm×G3/4, LFLF1007-28×G1: 28mm×G1, LFLF1007-35×G1‐1/4: 35mm×G1-1/4, LFLF1007-42×G1‐1/2: 42mm×G1-1/2, LFLF1007-54×G2: 54mm×G2. 90° equal elbow-A： LFLF1008-15: 15mm, LFLF1008-18: 18mm, LFLF1008-22: 22mm, LFLF1008-28: 28mm, LFLF1008-35: 35mm, LFLF1008-42: 42mm, LFLF1008-54: 54mm, LFLF1008-65: 76.1mm, LFLF1008-80: 88.9mm, LFLF1008-100: 108mm. 90° equal elbow-B： LFLF1009-15: 15mm, LFLF1009-18: 18mm, LFLF1009-22: 22mm, LFLF1009-28: 28mm, LFLF1009-35: 35mm, LFLF1009-42: 42mm, LFLF1009-54: 54mm. Female elbow： LFLF1010-15×Rp1/2: 15mm×Rp1/2, LFLF1010-18×Rp1/2: 18mm×Rp1/2, LFLF1010-22×Rp3/4: 22mm×Rp3/4, LFLF1010-28×Rp1: 28mm×Rp1, LFLF1010-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1010-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1010-54×Rp2: 54mm×Rp2. Male elbow： LFLF1011-15×R1/2: 15mm×R1/2, LFLF1011-18×R1/2: 18mm×R1/2, LFLF1011-22×R1/2: 22mm×R1/2, LFLF1011-22×R3/4: 22mm×R3/4, LFLF1011-28×R1: 28mm×R1, LFLF1011-35×R1‐1/4: 35mm×R1-1/4, LFLF1011-42×R1‐1/2: 42mm×R1-1/2, LFLF1011-54×R2: 54mm×R2. 45° equal elbow-A： LFLF1012-15: 15mm, LFLF1012-18: 18mm, LFLF1012-22: 22mm, LFLF1012-28: 28mm, LFLF1012-35: 35mm, LFLF1012-42: 42mm, LFLF1012-54: 54mm. 45° equal elbow-B： LFLF1013-15: 15mm, LFLF1013-18: 18mm, LFLF1013-22: 22mm, LFLF1013-28: 28mm, LFLF1013-35: 35mm, LFLF1013-42: 42mm, LFLF1013-54: 54mm. Equal tee： LFLF1014-15: 15mm, LFLF1014-18: 18mm, LFLF1014-22: 22mm, LFLF1014-28: 28mm, LFLF1014-35: 35mm, LFLF1014-42: 42mm, LFLF1014-54: 54mm, LFLF1014-65: 76.1mm, LFLF1014-80: 88.9mm, LFLF1014-100: 108mm. Reducing tee： LFLF1015-018015: 18mm×15mm, LFLF1015-022015: 22mm×15mm, LFLF1015-022018: 22mm×18mm, LFLF1015-028015: 28mm×15mm, LFLF1015-028018: 28mm×18mm, LFLF1015-028022: 28mm×22mm, LFLF1015-035015: 35mm×15mm, LFLF1015-035018: 35mm×18mm, LFLF1015-035022: 35mm×22mm, LFLF1015-035028: 35mm×28mm, LFLF1015-042015: 42mm×15mm, LFLF1015-042018: 42mm×18mm, LFLF1015-042022: 42mm×22mm, LFLF1015-042028: 42mm×28mm, LFLF1015-042035: 42mm×35mm, LFLF1015-054015: 54mm×15mm, LFLF1015-054018: 54mm×18mm, LFLF1015-054022: 54mm×22mm, LFLF1015-054028: 54mm×28mm, LFLF1015-054035: 54mm×35mm, LFLF1015-054042: 54mm×42mm. Female tee： LFLF1016-15×Rp1/2: 15mm×Rp1/2, LFLF1016-18×Rp1/2: 18mm×Rp1/2, LFLF1016-22×Rp3/4: 22mm×Rp3/4, LFLF1016-28×Rp1/2: 28mm×Rp1/2, LFLF1016-28×Rp1: 28mm×Rp1, LFLF1016-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1016-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1016-54×Rp2: 54mm×Rp2. Male tee： LFLF1017-15×Rp1/2: 15mm×Rp1/2, LFLF1017-18×Rp1/2: 18mm×Rp1/2, LFLF1017-22×Rp3/4: 22mm×Rp3/4, LFLF1017-28×Rp1/2: 28mm×Rp1/2, LFLF1017-28×Rp1: 28mm×Rp1, LFLF1017-35×Rp1‐1/4: 35mm×Rp1-1/4, LFLF1017-42×Rp1‐1/2: 42mm×Rp1-1/2, LFLF1017-54×Rp2: 54mm×Rp2. Pipe： LFLP1001-15: 15mm, LFLP1001-18: 18mm, LFLP1001-22: 22mm, LFLP1001-28: 28mm, LFLP1001-35: 35mm, LFLP1001-42: 42mm, LFLP1001-54: 54mm, LFLP1001-65: 76.1mm, LFLP1001-80: 88.9mm, LFLP1001-100: 108mm.

Product Images

Approval Holder:

Zhejiang Loffrey Technology Co., Ltd.

Company Name

Zhejiang Loffrey Technology Co., Ltd.

Address

No. 515 Binhai 15th Road, Xinghai Sub‐district, Wenzhou Economic and Technological Development Zone, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Loffrey Technology Co., Ltd.

Company Name

Zhejiang Loffrey Technology Co., Ltd.

Address

No. 515 Binhai 15th Road, Xinghai Sub‐district, Wenzhou Economic and Technological Development Zone, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company