Directory Search Results

Print List

#2104081

WC dual flush drop valve with plastic body silicone and rubber seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold Water Use Only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2104081
Size:
2" BSP (M)
Marking:
UK Bathrooms on top of valve body.
Installation Requirements:
R001 R571
Expiry date:
30/04/2026
Model:
UKB210

Approval Holder:
UK Bathrooms Ltd
Company Name
UK Bathrooms Ltd
Address
Aston House Redburn Road Newcastle Upon Tyne
Postcode
NE5 1NB

View All Listings by this Company

Print This Approval


#2312347

Range of packaged plate heat exchangers comprising of stainless steel plates with EPDM gaskets. The products are supplied with twin primary circulation pumps, a secondary circulation pump, 3 port control valve and a control panel with full Mod BUS BMS connectivity. Maximum working pressure - Primary and Secondary circuits 10.0 bar. Maximum operating temperature 85°C.

Section:
1350 Heat Exchangers
Size:
25, 30, 35 and 38 Series: Primary circuit: 1¼” BSP (F) inlet x 1¼” BSP (M) outlet. Secondary circuit: 1¼” BSP (M) inlet x 1¼” BSP (F) outlet. 40 Series: Primary circuit: 1½” BSP (F) inlet x 1½” BSP (M) outlet. Secondary circuit: 1½” BSP (F) inlet x 1½” BSP (F) outlet. 50 Series: Primary circuit: 2” BSP (M) inlet/outlet. Secondary circuit: 2” BSP (F) inlet/outlet.
Marking:
CHWS logo on front of control unit. CHWS logo serial number and model number on label on back plate.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
Propak Thermal range: 25 Series: 2507, 2509, 2511, 2513, 2515. 30 Series: 3013, 3017, 3019, 3021, 3023, 3025, 3029, 3033, 3039, 3045. 35 Series: 3531, 3535, 3539, 3543. 38 Series: 3811, 3821, 3829, 3835, 3843, 3851, 3859, 3867, 3875. 40 Series: 4015, 4017, 4019, 4021, 4029, 4035, 4041. 50 Series: 5021, 5025, 5031, 5035, 5039, 5043, 5049.

Approval Holder:
Commercial Hot Water Solutions Ltd.
Company Name
Commercial Hot Water Solutions Ltd.
Address
THe Hive, Beaufighter Road, Weston-Super-Mare
Postcode
BS24 8EE

View All Listings by this Company

Print This Approval


#240102040

Range of in-line ultrasonic water meters with DZR brass bodies and a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:
1505 Water Meters
Size:
DN15 = ¾” BSP (M), DN20 = 1” BSP (M), DN25 = 1¼” BSP (M), DN32 = 1½” BSP (M).
Marking:
Hydrus, Saudi Meters Company, DN, PN, technical data and product information on meter face.
Installation Requirements:
R001
Expiry date:
31/01/2029
Model:
Hydrus range: 3092801 (DN15), 3092646 (DN20), 3092804 (DN25), 3092805 (DN32).
Product Images

Approval Holder:
SAUDI METERS COMPANY
Company Name
SAUDI METERS COMPANY
Address
2nd Industrial Area-4719, Riyadh 14331-7141, Unit # 14, Kingdom of Saudi Arabia

View All Listings by this Company
Manufacturer:
SAUDI METERS COMPANY
Company Name
SAUDI METERS COMPANY
Address
Street # 173, 2nd Industrial Area, P.O. Box 185, Riyadh 11383, Saudi Arabia

View All Listings by this Company

Print This Approval


#240102070

Range of in-line water meters with plastic or brass bodies (see model) with stainless-steel strainers at the inlet. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:
1505 Water Meters
Size:
½” BSP (M) (DN15), 1¼” BSP (M) (DN25), 1 ½” BSP (M) (DN32) or 2” BSP (M) (DN40) Inlets x Outlets
Marking:
Itron logo, Aquadis, Pressure, CE and other information on faceplate. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/01/2029
Model:
P1 HR Aquadis+ DN15 brass P1 HR Aquadis+ DN15 composite P111+ Aquadis+ DN25 brass P110+ Aquadis+ DN32 brass P290+ Aquadis+ DN40 brass
Product Images

Approval Holder:
Itron Metering Solutions UK Ltd
Company Name
Itron Metering Solutions UK Ltd
Address
Unit 10, Haven Exchange Felixstowe Suffolk
Postcode
IP11 2QX
Phone
+44 161 865 1181

View All Listings by this Company
Manufacturer:
Itron Metering Solutions UK Ltd
Company Name
Itron Metering Solutions UK Ltd
Address
Unit 10, Haven Exchange Felixstowe Suffolk
Postcode
IP11 2QX
Phone
+44 161 865 1181

View All Listings by this Company

Print This Approval


#2312365

Range of water meter manifolds with plastic bodies which incorporates a (spherical) stop valve. The MB40408256BM, MB40408254NM, MB40408326BM, MB40408324BM, MB40425256BM MB40425254BM, MB40432326BM and MB40432324BM models incorporate a non-return valve. The MB40408255DCVBM and MB40408254DCVBM models incorporate two non-return valves. The product is supplied with pipe liners for use with the pushfit connections. The pushfit connections are for use with PE80 pipes (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
MB40425254BM & MB40425256BM: 25mm pushfit. MB40432324BM & MB40432326BM: 32mm pushfit. All other models: 2” BSP (F).
Marking:
Atlantic Plastics logo on body. Talbot and size marked on pushfit connections.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
MB40408256BM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (25mm Willow type 2 Bend), MB40408254NM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (25mm Willow type 2 Bend), MB40408326BM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (32mm Solid type 1 Bend), MB40408324BM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (32mm Solid type 1 Bend), MB40408255DCVBM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (25mm Willow type 2 Bend), MB40408254DCVBM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (25mm Willow type 2 Bend), MB40425256BM: Multi Manifold 6 Port - 6 Inlet x 6 Outlet (25mm Willow type 2 Bend), MB40425254BM: Multi Manifold 4 Port - 4 Inlet x 4 Outlet (25mm Willow type 2 Bend), MB40432326BM: Multi Manifold 6 Port - 6 Inlet x 6 Outlet (32mm Solid type 1 Bend), MB40432324BM: Multi Manifold 4 Port - 4 Inlet x 4 Outlet (32mm Solid type 1 Bend).

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1391 of 2295

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.