Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2108554

'Mungo Injection System MIT800RE'. Red coloured chemical anchor resin supplied in a pre-weighed dual cartridge. Apply as per manufacturer's instructions dated 'Jun-23'. Cure for 48 hours@7°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5311 Resin Anchors
Expiry date:: 31/08/2026

Approval Holder:: Mungo Befestigungstechnik AG

Company Name
Mungo Befestigungstechnik AG
Address
Bornfeldstrasse 2, 4600 Olten
Country
Switzerland

View All Listings by this Company

WRAS Approval Number: #2309533

'EP025CTF 'O' rings and gaskets'. Black coloured, compression moulded EPDM 'O' rings and gaskets'. Shore hardness 40-90. 'O' rings have an in-radius size of between 0.5mm & 5.0mm. Gaskets have an in-radius size of between 0.5mm & 1.75mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 2309533
Expiry date:: 30/09/2028

Approval Holder:: Ningbo Tiandao Seal Co. Ltd.

Company Name
Ningbo Tiandao Seal Co. Ltd.
Address
No. 518 Yinzhou Northeast Road, Yinzhou District, Ningbo City, Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2310508

'EPDM50BKWS, EPDM55BKWS, EPDM60BKWS, EPDM65BKWS, EPDM70BKWS, EPDM75BKWS & EPDM80BKWS'. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2310508
Expiry date:: 31/10/2028

Approval Holder:: Kesaria Rubber Industries Pvt. Ltd.

Company Name
Kesaria Rubber Industries Pvt. Ltd.
Address
Binola Industrial Area, VPO Bhoda Kalan, 57/58 KM Stone, NH-8, Gurgaon, 122413, Haryana
Country
India

View All Listings by this Company

WRAS Approval Number: #2204543

'JJSXEPDMIRHD50 (shore hardness 50) & JJSXEPDMIRHD70 (shore hardness 70)'. Black coloured, compression moulded EPDM materials. Tested in-radius size 0.99mm. For use with water up to 23°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2204543
Expiry date:: 30/04/2027

Approval Holder:: Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.

Company Name
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Address
Building No.5, Zi Yun Wisdom Plaza, No. 19 Kazimen Avenue, Qinhuai District, Nanjing
Country
China

View All Listings by this Company

WRAS Approval Number: #2310514

'Water Life'. Black coloured, compression moulded NBR 'O' rings. Shore hardness 70. Tested in-radius size between 0.75mm & 1.25mm. For use with water up to 23°C.

Section:: 5390 Rubbers
Section Subtitle:: Nitrile (Acrylonitrile Butadiene) - components.
WRAS Approval Number:: 2310514
Expiry date:: 31/10/2028

Approval Holder:: Vako Seals Pvt. Ltd.

Company Name
Vako Seals Pvt. Ltd.
Address
A-25/Pravasi Industrial Estate, Off Aarey Road, Goregaon (East), Mumbai 400063
Country
India
Phone
+91 22 28746260/28747991

View All Listings by this Company