Inlet hose consisting of a EPDM inner hose layer and corrugated outer cover. The hose is fitted with an integral device consisting of a water sensitive material which expands when in contact with water. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240704011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Any anti-flooding claims made by the manufacturer have not been verified by test and are covered by this approval).

Size:

¾” BSP captive nut

Marking:

Wuxi Jinhua, Model, WRAS, date of manufacture (YYYY) etched on hose cover.

Installation Requirements:

R001 R150

Expiry date:

31/07/2029

Model:

GJS-FL-115HW - Aquastop inlet hose.

Product Images

Approval Holder:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Manufacturer:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Range of stainless steel or nylon braided EPDM lined flexible hose assemblies with various brass end connections. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10 Bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240704012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Lux, WRAS, Date of Manufacture (YY), PN&DN stamped on crimped connector

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Bore diameter – DN6 Male M8, M10, M11, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Bore diameter – DN8 Male M10, M11, M12, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Female 1/2” BSP female with swivel conical nut and o-ring Female Elbow 1/4” BSP, 3/8” BSP Female Elbow 3/8” BSP w/gasket Compression 15mm Plug in 10mm (with 2 'O'-rings) Bore diameter – DN10 Male M12, 3/8" BSP, 1/2” BSP Female w/gasket 1/2” BSP, 3/8” BSP, 3/4” BSP Female 1/2” BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in elbow 18.6mm Straight Plug in 17mm Bore diameter – DN13 Male 1/2” BSP, 3/4" BSP Female w/gasket 1/2” BSP, 3/4” BSP Female 3/4"BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in 12mm, 15mm, 29mm, 29mm long Plug in elbow 18mm, 23.6mm, 28mm

Product Images

Approval Holder:

LUXOR S.p.A.

Company Name

LUXOR S.p.A.

Address

Via Madonnina, 94 Montichiari (BS)

Postcode

25018

Country

Italy

Phone

+39 030 9961161

General Email

marco.cauzzi@luxor.it

View All Listings by this Company

Manufacturer:

LUXOR S.p.A.

Company Name

LUXOR S.p.A.

Address

Via Madonnina, 94 Montichiari (BS)

Postcode

25018

Country

Italy

Phone

+39 030 9961161

General Email

marco.cauzzi@luxor.it

View All Listings by this Company

Nylon and stainless-steel braided EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

241002078

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to models.

Marking:

Hualing logo, WRAS and date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HL-SS-XX-XX-XXX-XXX SS=Stainless Steel Braided Hose XX: Connection sizes: 01=F3/8 02=F1/2 03=F3/4 04=F15*1 05=M3/8 06=M1/2 07=M3/4 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm ID or 11mm OD Note: Connection 01, 02, 04, 05, 06, 08, 09, 10, 11, 12 applicable for DN6. Connection 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 applicable for DN8. Connection 01, 02, 03, 04, 05, 06, 07, 08 applicable for DN10. Connection 02, 03, 06, 07 applicable for DN14. 1st XXX: Hose inner size: 006= DN6, 008= DN8, 010= DN10, 014= DN14. 2nd XXX: Hose length: 15CM - 200CM. HL-N-XX-XX-XXX-XXX N=Nylon Pull out Hose. XX: Connection sizes: 01=F3/8 02=F1/2 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm OD 1st XXX: Hose inner size: 006= DN6, 008= DN8. 2nd XXX: Hose length: 15CM - 200CM.

Approval Holder:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province

Country

CHINA

View All Listings by this Company

Manufacturer:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province

Country

CHINA

View All Listings by this Company

Range of stainless steel braided hoses with EPDM liner and NBR or fibre gaskets. DN13 and DN19 Maximum working pressure 10 bar. Maximum operating temperature 65°C. DN25 Maximum working pressure 10 bar. Cold water use only.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240704037

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

APL, Date of manufacture (YYYY) and WRAS stamped on ferrule.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

H786 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H782 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H783 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H784 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H785 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H980 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.5m H979 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H978 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H977 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H976 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H775 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H769 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H772 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H773 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H774 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H981 19mm stainless steel braided hose 3/4" F BENT x 3/4” F BENT 1.5m H829 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H830 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H831 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H832 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H984 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.5m H767 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.25m H833 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.0m H768 25mm stainless steel braided hose 1” F STR x 1” F BENT 0.75m H989 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.5m H988 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.25m H987 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.0m H986 25mm stainless steel braided hose 1” F BENT x 1” F BENT

Product Images

Approval Holder:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire

Postcode

L40 8AF

View All Listings by this Company

Manufacturer:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire

Postcode

L40 8AF

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2211708

Size:

see model

Marking:

South Coast Sales Logo, WRAS and date of manufacture YYYY on crimp connection.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

½“ compression x ½" (F) BSP captive nut: EMBW130, length 30cm EMBW150, length 50cm - DN8 ¾“ compression x ¾" (F) BSP captive nut: EMBW530, length 30cm EMBW550, length 50cm - DN13

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company