Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2309080

Range of copper end feed solder fittings for use with copper tube (EN1057). For above and below ground use. Maximum working pressure for sizes 8mm to 54mm is 25.0 bar. Maximum working pressure for sizes above 54mm is 16.0 bar. Maximum operating temperature 99°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2309080
Size:: See models
Marking:: Brymec logo & size on fitting body.
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: 15 30014 COUPLER 22 30015 COUPLER 28 30016 COUPLER 35 30017 COUPLER 42 30018 COUPLER 54 30019 COUPLER 67 30020 COUPLER 76 30021 COUPLER 108 30022 COUPLER 22 x 15 30122 REDUCING COUPLING 28 x 22 30123 REDUCING COUPLING 28 x 15 30116 REDUCING COUPLING 35 x 22 30118 REDUCING COUPLING 35 x 28 30124 REDUCING COUPLING 42 x 22 30125 REDUCING COUPLING 42 x 28 30126 REDUCING COUPLING 42 x 35 30127 REDUCING COUPLING 54 x 35 30128 REDUCING COUPLING 54 x 42 30132 REDUCING COUPLING 15 x 10 30095 FITTING REDUCER 22 x 15 30097 FITTING REDUCER 28 x 15 30098 FITTING REDUCER 28 x 22 30099 FITTING REDUCER 35 x 15 30100 FITTING REDUCER 35 x 22 30101 FITTING REDUCER 35 x 28 30102 FITTING REDUCER 42 x 15 30107 FITTING REDUCER 42 x 22 30108 FITTING REDUCER 42 x 28 30103 FITTING REDUCER 42 x 35 30104 FITTING REDUCER 54 x 15 30109 FITTING REDUCER 54 x 22 30110 FITTING REDUCER 54 x 28 30111 FITTING REDUCER 54 x 35 30105 FITTING REDUCER 54 x 42 30106 FITTING REDUCER 67 x 28 30023 FITTING REDUCER 67 x 35 30024 FITTING REDUCER 67 x 42 30025 FITTING REDUCER 67 x 54 30114 FITTING REDUCER 76 x 35 30026 FITTING REDUCER 76 x 42 30027 FITTING REDUCER 76 x 54 30088 FI TTING REDUCER 76 x 67 30089 FITTING REDUCER 108 x 54 30091 FITTING REDUCER 15 30030 90° ELBOW 22 30031 90° ELBOW 28 30032 90° ELBOW 35 30033 90° ELBOW 42 30034 90° ELBOW 54 30035 90° ELBOW 67 30036 90° ELBOW 76 30037 90° ELBOW 108 30038 90° ELBOW 15 30129 90° STREET ELBOW 22 30130 90° STREET ELBOW 28 30131 90° STREET ELBOW 35 30133 90° STREET ELBOW 42 30134 90° STREET ELBOW 54 30135 90° STREET ELBOW 15 30063 45° ELBOW 22 30064 45° ELBOW 28 30065 45° ELBOW 35 30066 45° ELBOW 42 30067 45° ELBOW 54 30068 45° ELBOW 67 30069 45° ELBOW 76 30070 45° ELBOW 108 30071 45° ELBOW 15 30144 45° STREET ELBOW 22 30145 45° STREET ELBOW 28 30146 45° STREET ELBOW 35 30147 45° STREET ELBOW 42 30148 45° STREET ELBOW 54 30149 45° STREET ELBOW 15 30275 SLIP COUPLING 22 30276 SLIP COUPLING 28 30277 SLIP COUPLING 35 30278 SLIP COUPLING 42 30279 SLIP COUPLING 54 30280 SLIP COUPLING 15 x ½” 30152 IMPERIAL TO METRIC COUPLER 22 x ¾” 30153 IMPERIAL TO METRIC COUPLER 28 x 1” 30154 IMPERIAL TO METRIC COUPLER 15 30047 EQUAL TEE 22 30048 EQUAL TEE 28 30049 EQUAL TEE 35 30050 EQUAL TEE 42 30051 EQUAL TEE 54 30052 EQUAL TEE 67 30053 EQUAL TEE 76 30054 EQUAL TEE 108 30055 EQUAL TEE 22 x 22 x 15 30207 REDUCING TEE 28 x 28 x 15 30211 REDUCING TEE 28 x 28 x 22 30212 REDUCING TEE 35 x 35 x 15 30223 REDUCING TEE 35 x 35 x 22 30213 REDUCING TEE 35 x 35 x 28 30229 REDUCING TEE 42 x 42 x 15 30242 REDUCING TEE 42 x 42 x 22 30214 REDUCING TEE 42 x 42 x 28 30243 REDUCING TEE 42 x 42 x 35 30215 REDUCING TEE 54 x 54 x 15 30253 REDUCING TEE 54 x 54 x 22 30254 REDUCING TEE 54 x 54 x 28 30246 REDUCING TEE 54 x 54 x 35 30216 REDUCING TEE 54 x 54 x 42 30217 REDUCING TEE 67 x 67 x 28 30248 REDUCING TEE 67 x 67 x 35 30255 REDUCING TEE 67 x 67 x 42 30256 REDUCING TEE 67 x 67 x 54 30218 REDUCING TEE 76 x 76 x 28 30257 REDUCING TEE 76 x 76 x 35 30262 REDUCING TEE 76 x 76 x 42 30263 REDUCING TEE 76 x 76 x 54 30264 REDUCING TEE 76 x 76 x 67 30265 REDUCING TEE 108 x 108 x 54 30271 REDUCING TEE 108 x 108 x 67 30272 REDUCING TEE 108 x 108 x 76 30273 REDUCING TEE 22 x 15 x 15 30205 REDUCING TEE 22 x 15 x 22 30206 REDUCING TEE 28 x 15 x 15 30198 REDUCING TEE 28 x 15 x 22 30219 REDUCING TEE 28 x 15 x 28 30209 REDUCING TEE 28 x 22 x 15 30220 REDUCING TEE 28 x 22 x 22 30208 REDUCING TEE 28 x 22 x 28 30210 REDUCING TEE 35 x 22 x 22 30225 REDUCING TEE 35 x 22 x 35 30228 REDUCING TEE 35 x 28 x 22 30226 REDUCING TEE 35 x 28 x 28 30227 REDUCING TEE 35 x 28 x 35 30232 REDUCING TEE 42 x 28 x 28 30235 REDUCING TEE 54 x 42 x 42 30247 REDUCING TEE 15 x 15 x 22 30204 REDUCING TEE 22 x 22 x 28 30197 REDUCING TEE 28 x 28 x 35 30221 REDUCING TEE 15 30079 STOP END 22 30080 STOP END 28 30081 STOP END 35 30082 STOP END 42 30083 STOP END 54 30084 STOP END 67 30085 STOP END 76 30086 STOP END 108 30087 STOP END 15 30230 FULL CROSS OVER 22 30231 FULL CROSS OVER 15 30237 PARTIAL CROSS OVER 22 30238 PARTIAL CROSS OVER

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #240602033

Range of blue epoxy coated ductile iron dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1220 Fittings for use with Tube and Pipe
Section Subtitle:: Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:: 240602033
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN50 to DN1200 Flanged
Marking:: FAMAT, Sapag-valves.com, model and technical information on data plate on body
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: DJ1 Dismantling Joint

Approval Holder:: SAPAG VALVES

Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Country
France
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company

WRAS Approval Number: #240604022

Domestic hot water heat recovery unit incorporating a stainless steel plate heat exchanger. The product is supplied with 15mm x 15mm compression 90° elbows for installation on the inlet and outlet. Maximum operating pressure 10 bar. Maximum operating temperature 80°C

Section:: 1350 Heat Exchangers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm compression elbow
Marking:: Worcester (brand of the Bosch group), serial no., model name and technical information on adhesive label on outer casing.
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: Greenstar 8-718-644-603

Approval Holder:: Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name
Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.
Address
Organize Sanayi Bolgesi, 45030 Manisa, Turkey

View All Listings by this Company
Manufacturer:: Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name
Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.
Address
Organize Sanayi Bolgesi, 45030 Manisa, Turkey

View All Listings by this Company

WRAS Approval Number: #240504725

Range of direct gas fired condensing water heaters with a stainless steel body. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:: 1400 Heaters
Section Subtitle:: Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:: 240504725
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (F)
Marking:: Lochinvar on body.
Installation Requirements:: R001 R140
Expiry date:: 31/05/2029
Model:: LGSS 200-600 LGSS 200-780 WATER HEATERS

Approval Holder:: Lochinvar Ltd.

Company Name
Lochinvar Ltd.
Address
8 Lombard Way The MXL Centre Banbury
Postcode
OX16 4TJ
Country
Oxon
Phone
+44 (0) 1295 269981
General Email
general@lochinvar.ltd.uk

View All Listings by this Company

WRAS Approval Number: #240504721

Range of direct fired water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:: 1400 Heaters
Section Subtitle:: Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:: 240504721
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Lochinvar on body.
Installation Requirements:: R001 R140
Expiry date:: 31/05/2029
Model:: LGC 160-210 CE LGC 200-210 CE LGC 160-350 CE LGC 200-350 CE LGC 245-420 CE LGC 285-420 CE LGC 245-560 CE LGC 285-560 CE LGC 380-560 CE WATER HEATERS

Approval Holder:: Lochinvar Ltd.

Company Name
Lochinvar Ltd.
Address
8 Lombard Way The MXL Centre Banbury
Postcode
OX16 4TJ
Country
Oxon
Phone
+44 (0) 1295 269981
General Email
general@lochinvar.ltd.uk

View All Listings by this Company