Range of integrated water circuits incorporating a plate heat exchanger. The units incorporate a flow sensor, pressure relief valve set at 3.0 bar, and a primary circuit circulation pump. Maximum working pressure secondary circuit 10.0 bar. Maximum working pressure primary circuit 2.5 bar. Maximum operating temperature 70°C. Cold supply only.

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

240507702

Size:

IWC Std.: Secondary circuit: ½” BSP (M) inlet x ½” BSP (M) outlet. Primary circuit: ¾” BSP (M) inlet x ¾” BSP (M) outlet. IWC Fgr.: Secondary circuit: F4 connection inlet x ½” BSP (M) outlet. Primary circuit: F4 connection inlet x ¾” BSP (M) outlet. IWC Rgr.: Secondary circuit: ½” BSP (M) inlet x F4 connection outlet. Primary circuit: ¾” BSP (M) inlet x ¾” BSP (M) outlet.

Marking:

Flow groups (IWC Fgr.): Grundfos part code, date of manufacture (DD/MM/YY hh:mm:ss), GRUNDFOS and QR code on adhesive label on body. Return groups (IWC Rgr.): Grundfos name and logo on pump. IWC Std.: Complete products will include the markings of the flow and return groups.

Installation Requirements:

R001 R008

Expiry date:

31/05/2029

Model:

IWC Std. UPM3/UPM4/UPS-xx CHB -xx pl xxx-xxxxxxxx The IWC Std. comprises of the following Flow and Return groups (available separately). IWC Fgr xxx-xxxxxxxx. IWC Rgr UPM3/UPM4-xx CHB xxx-xxxxxxxx. Where (as applicable): -xx = Pump max head. -xx pl = Plate heat exchanger number of plates (10-32). xxx-xxxxxxxx = Replaced by letters and/or numbers and do not have any bearing on water contact parts.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of ¼ turn ceramic disc (brass bodies), non rising spindles (brass bodies) or ceramic cartridge headworks (plastic bodies) insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

35mm OD, 40mm OD or ½” BSP (M) (see models)

Marking:

CHIXIN logo, WRAS and CX on body

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

Ceramic Cartridges: CXPKD-02 (40mm OD) CXPKS-02 (40mm OD) Non Rising Spindles: CX-WR-01 (1/2” BSP (M)) CX-WR-02 (1/2” BSP (M)) ¼ Turn Ceramic: CX-WR-03 (1/2” BSP (M)) CX-WR-04 (1/2” BSP (M)) Models added September 2024 Ceramic Cartridges: CXPKD-01 (35mm OD) CXPKS-01 (35mm OD)

Approval Holder:

Zhejiang Chixin Group Co. Ltd.

Company Name

Zhejiang Chixin Group Co. Ltd.

Address

Hongsan Industrial Zone Hongchou Tiantai Zhejiang

Country

China

View All Listings by this Company

Range of in-line and concentric water meters with composite bodies, TPE gasket and NBR ‘O’-ring(s). The products have an integral plastic filter. The inlet of the in-line models includes a non-return valve. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

JV600 Q3=2,5 R***: ¾” BSP (M). JV600 Q3=4 R***: 1” BSP (M). JV600 Q3=6,3 R***: 1¼” BSP (M). JV600 Q3=2,5 Concentric R***: ¾” BSP (M). JV600e Q3=2,5 R*** 3/4” BSP (M) JV600e Q3=2,5 Concentric R*** 3/4” BSP (M) JV600e Q3=4 R*** 1” BSP (M) JV600e Q3=6,3 R*** 1 1/4” BSP (M)

Marking:

Janz logo, maximum pressure, CE and other technical information on cover.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

In-line water meter: JV600 Q3=2,5 R***. JV600 Q3=4 R***. JV600 Q3=6,3 R***. Concentric water meter: JV600 Q3=2,5 Concentric R***. Models added October 2024 JV600e Q3=2,5 R*** JV600e Q3=2,5 Concentric R*** JV600e Q3=4 R*** JV600e Q3=6,3 R*** Where *** relates to Class of Accuracy of the water meter and can be replaced by: 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 4100, 500, 630, 800.

Approval Holder:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Manufacturer:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Range of water meters with brass bodies, plastic turbines and plastic strainers on inlets. The products have an integral plastic filter. The inlet includes a non-return valve. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP M

Marking:

JANZ logo, Max working pressure, model code, CE and other technical information on meter face

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

JV400 Q3=2,5 R***, JV400 Q3=2,5 Concentric R***, JV400 Q3=4 R***, JV400 Q3=6,3 R***, JV400 Q3=10 R*** & JV400 Q3=16 R***. Models added October 2024 JV400e Q3=2,5 R*** JV400e Q3=2,5 Concentric R*** JV400e Q3=4 R*** JV400e Q3=6,3 R*** JV400e Q3=10 R*** JV400e Q3=16 R*** Where *** relates to Class of Accuracy of the water meter and can be replaced by: 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 4100, 500, 630, 800.

Approval Holder:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Manufacturer:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Octave range of water meters with blue epoxy coated cast iron or plastic bodies (see models). Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

13905XXX & 13915XXX - Flow arrow on body. ARAD logo, DN, product information and model range on label under the plastic lid. 139XXXXX - Flow arrow and size on body. ARAD logo, product information and model range on label under the plastic lid.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

OCTAVE range: 13905XXX (Composite Body, 2" BSP (M)) 13915XXX (Composite Body, 2.1/4" BSP (M)) 139XXXXX (Iron Body, 2” to 12”) 13905 & 13915: Where the XXX denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications. 139XXXXX: Where the 1st X denotes the size, and can be replaced with any of the following: 1 = 2” Flanged, 2 = 2.1/2” Flanged, 3 = 3” Flanged, 4 = 4” Flanged, 5 = 6” Flanged, 6 = 8” Flanged, 7 = 10” Flanged, 8 = 12” Flanged, Where the 2nd X denotes body type and customer specific and can be replaced with any of the following: 5 = Composite body, All other numbers = Customer specific Where the 3rd, 4th and 5th X’s denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications.

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company