Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Circulation pump with a stainless steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241104706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M)

Marking:

Archergas, model and technical information on case. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

DHW15 Circulation Pump.

Approval Holder:

Archergas Limited

Company Name

Archergas Limited

Address

85 Bayham Street, Camden Town

View All Listings by this Company

‘UPM10’ and ‘UPM20’ range of circulator pumps with a stainless-steel body, plastic impellor and EPDM ‘O’-rings. The product is supplied with EPDM gaskets for the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241207701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo, type and model on nameplate on motor housing. P/N no., P/C no., Serial (S/N) no., technical info, manufacturing country and data matrix on end of motor housing. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

UPM 10M 25-95 N 180, UPM 10L 25-105 N 180, UPM 10XL 25-125 N 180, UPM 20S 25-145 N 180. Where: Pump type: UPM 10M, UPM 10L, UPM 10XL, UPM 20S. Control variant: []: PWM, LIN: LIN bus input signal, 0-10V, AUTO, HYBRID, SOLAR, DHW. Nominal diameter: 25: G 1½”. Max. Head: 95: 9.5m, 105: 10.5m, 125: 12.5m, 145: 14.5m. Designation/Pump housing: N 180: Stainless steel body, 180mm port to port length. Control box orientation: 3: 3 o’clock (right), 6: 6 o’clock (below), 9: 9 o’clock (left). Customer code: XXX (no impact on water contact parts).

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Self-priming single stage pump, with stainless steel body, plastic impellers, stainless steel shaft, NBR 'O'-rings and seals. Maximum working pressure 6.0 bar. Maximum operating temperature 45°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241107701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F).

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model number, product/version number, technical information, serial number and manufacturing location on adhesive label on motor housing.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2029

Model:

99458789: JP 4-54 1X230V 50Hz 1,5M UK HU IE2.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of stainless steel or cast iron (with electrolytic coating) bodied, multistage centrifugal pumps with stainless steel impellers. Maximum working pressure: Ranges from 16.0 bar to 30.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251108701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Hydroo, model and product information on data plate fixed on pump bracket. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

VX1 Stainless steel Body – DIN Flange (2 to 40 stages) DN25 (PN25), VX3 Stainless steel Body – DIN Flange (2 to 31 stages) DN25 (PN25), VX5 Stainless steel Body – DIN Flange (2 to 33 stages) DN32 (PN25), VX10 Stainless steel Body – DIN Flange (1 to 22 stages) DN40 (PN25), VX15 Stainless steel Body – DIN Flange (1 to 18 stages) DN50 (PN25), VX20 Stainless steel Body – DIN Flange (1 to 17 stages) DN50 (PN25), VX32 Stainless steel Body – DIN Flange (1 to 16 stages) DN65 (PN30), VX45 Stainless steel Body – DIN Flange (1 to 13 stages) DN80 (PN30), VX65 Stainless steel Body – DIN Flange (1 to 8 stages) DN100 (PN25), VX1 Stainless steel Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VX3 Stainless steel Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VX5 Stainless steel Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VX10 Stainless steel Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16), VF1 Cast Iron Body – DIN Flange (2 to 40 stages) DN25 (PN25), VF3 Cast Iron Body – DIN Flange (2 to 31 stages) DN25 (PN25), VF5 Cast Iron Body – DIN Flange (2 to 33 stages) DN32 (PN25), VF10 Cast Iron Body – DIN Flange (1 to 22 stages) DN40 (PN25), VF15 Cast Iron Body – DIN Flange (1 to 18 stages) DN50 (PN25), VF20 Cast Iron Body – DIN Flange (1 to 17 stages) DN50 (PN25), VF32 Cast Iron Body – DIN Flange (1 to 16 stages) DN65 (PN30), VF45 Cast Iron Body – DIN Flange (1 to 13 stages) DN80 (PN30), VF65 Cast Iron Body – DIN Flange (1 to 8 stages) DN100 (PN25), VF1 Cast Iron Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VF3 Cast Iron Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VF5 Cast Iron Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VF10 Cast Iron Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16).

Approval Holder:

HYDROO PUMP INDUSTRIES S.L.

Company Name

HYDROO PUMP INDUSTRIES S.L.

Postcode

17843

Country

Spain

General Email

jordi.armengol@hydroo.com

View All Listings by this Company