Range of pillar taps incorporating either stainless steel or brass bodies (various finishes), quarter turn ceramic disc headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. The RB3 models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2111007

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assembly incorporating a 10mm spigot end connection.

Marking:

Vola on operating member

Installation Requirements:

R001 R006 R009

Expiry date:

30/11/2026

Model:

VOLA RB1-XX Stainless steel. VOLA RB3-XX Stainless steel. Where XX denotes the surface finish: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. VOLA RB1-XX Brass. VOLA RB3-XX Brass. Where XX denotes the surface finish: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

'APL' range of PVC lined flexible hose assemblies with various end connectors. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1840 Tubes

Section Subtitle:

Plastic, cold-water use.

WRAS Approval Number:

2112336

Note:

R008 applies to the hoses with plastic elbows.

Size:

see model

Marking:

Aquamatic Products Limited logo (APL), WRAS, year of manufacture (YYYY) on ferrule

Installation Requirements:

R001 R008

Expiry date:

31/12/2026

Model:

APL range available with the following end fittings: DN10: ¾” female straight x ¾” female elbow with retained washer DN12: 15mm compression x ½” female straight ¾” female straight with retained washer x ¾” female elbow with retained washer ¾” female straight x ¾” female elbow DN19: ¾” female x ¾” female elbow 22mm compression x ¾” female straight

Approval Holder:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

Hydestile Stud Hambeldon Road Godalming Surrey

Postcode

GU8 4DE

Country

United Kingdom

Phone

01483 861559

General Email

steve@aquamatic.co.uk

View All Listings by this Company

Manufacturer:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

Hydestile Stud Hambeldon Road Godalming Surrey

Postcode

GU8 4DE

Country

United Kingdom

Phone

01483 861559

General Email

steve@aquamatic.co.uk

View All Listings by this Company

Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2106048

Note:

Open outlet use only.

Size:

½” BSP Captive nut inlet x outlet.

Marking:

WRAS, Aqualisa and date of manufacture (MM/YY) on conical nut.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

700530 ½” BSP Hose 1.75m x 12 Dia (Con1C/7C) CP 571605 1.2” BSP Hose 1.5m x 12 Ø (Con1C/7C) CP 704185 QZE 1.2m SS Metal Hose (Con7c/7c) 2019

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

PEX lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2204701

Size:

See model

Marking:

HRN’, ‘WRAS’ and manufacturing date (YY/MM) on ferrule.

Installation Requirements:

R001 R008

Expiry date:

30/04/2027

Model:

Bore diameter: DN8, DN10 or DN13 End connections: ½” BSP F, 3/8” BSP F, ¾” BSP F, ½” BSP M, 3/8” BSP M & ¾” BSP M. M8, M10, M12 & M15. 10mm compression, 12mm compression, 15mm compression & 22mm compression. 15mm compression isolation valve & 22mm compression isolation valve. 3-WAY connector x 9mm Quick connector 9mm M-Quick plastic connector, 9mm M-quick Brass connector 135-A-B-C-D-E-F. The letters denote the following (for DN8): A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective. E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective F denotes DN size and is replaced by: 0 = DN8. The letters denote the following (for DN10) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN10 The letters denote the following (for DN13) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 03 = ¾” F, 17 = ½” M, 19 = 3/4” M, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 48 = M16, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN13

Approval Holder:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Manufacturer:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

EPDM lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2204700

Size:

See model

Marking:

HRN’, ‘WRAS’ and date of manufacture (YY/MM) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Bore diameter: DN8, DN10 or DN13 End connections: ½” BSP F, 3/8” BSP F, ¾” BSP F, ½” BSP M, 3/8” BSP M & ¾” BSP M. M8, M10, M12 & M15. 10mm compression, 12mm compression, 15mm compression & 22mm compression. 3-WAY connector x 9mm Quick connector 9mm M-Quick plastic connector, 9mm M-quick Brass connector 134-A-B-C-D-E-F. The letters denote the following (for DN8): A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective. E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective F denotes DN size and is replaced by: 0 = DN8. The letters denote the following (for DN10) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN10 The letters denote the following (for DN13) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 03 = ¾” F, 17 = ½” M, 19 = 3/4” M, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 48 = M16, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN13

Approval Holder:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Manufacturer:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company