Directory Search Results

Print List

#2309365

Range of under counter, vented, electric instantaneous (near boiling) water heaters with a stainless steel tank and silicone seals. Maximum operating temperature 98°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2309365
Note:
Open outlet use only.
Size:
8mm pushfit.
Marking:
E-Tec on adhesive label on rear of body.
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
B132001 (Grey), B100-B-XXX (Black), B100-W-XXX (White).
Product Images

Approval Holder:
Xiamen E-Tec Electric Shower Co., LTD
Company Name
Xiamen E-Tec Electric Shower Co., LTD
Address
No.11, HaiJing East 2nd Road, Xiamen Area of China (Fujian) Pilot Free Trade Zone.

View All Listings by this Company

Print This Approval


#2310097

‘G5 B’ & ‘G5 BA’ ranges of command centres that provide instant near boiling (filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The products can also be supplied with a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2310097
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip logo on body. Serial number containing date of manufacture (YYYY/MM/DD) and manufacturing code on adhesive label inside cover.
Installation Requirements:
R001 R007 R008 R009 R040 R150 R170
Expiry date:
31/10/2028
Model:
Command Centre UK HydroTap Main Models: H50086000UK - G5 B Home M, H50006000UK - G5 B60 M (with or without booster) H50008000UK - G5 BA60 M (with or without booster). Command Centre UK HydroTap Venturi Models: H50091000UK - G5 B Home H H50056000UK - G5 B60 H (with or without booster).
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Print This Approval


#2309362

SATK Series 22 range of wall-mounted direct heat interface units providing heating and instantaneous hot water. The hot water is generated via a plate heat exchanger. Maximum working pressure of all water circuits (secondary hot water, primary and space heating) 10.0 bar. Maximum operating temperature 90°C.

Section:
1460 Heaters
Section Subtitle:
Supplied from storage only, gas, thermal storage.
WRAS Approval Number:
2309362
Size:
¾” BSP (M)
Marking:
Caleffi on casing. Model, pressure and other technical information on adhesive label inside casing.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2028
Model:
SATK22303 - Wall-mounted Direct Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 50kW. SATK22305 - Wall-mounted direct Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 60kW. SATK22307 - Wall-mounted direct Heat Interface Unit for Instantaneous domestic hot water production – For low temperature primary circuit.
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2309313

‘SATK 32’ range of indirect heat interface units providing instantaneous hot water. Domestic hot water is provided via a plate heat exchanger and this circuit incorporates a flow detector, stainless-steel filter and water hammer arrestor. The primary/space heating circuit incorporates a pressure relief valve set at 2.5 bar and an expansion vessel. Maximum working pressure of the domestic hot water circuit is 10.0 bar. Maximum working pressure of the primary circuit is 16.0 bar. Maximum working pressure of the space heating circuit is 2.5 bar. Maximum operating temperature 90°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2309313
Size:
¾” BSP (M).
Marking:
Caleffi and Caleffi logo moulded on face of unit. Caleffi, Caleffi logo, model number and technical info on data plate inside unit.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2028
Model:
SATK32103 - Wall-mounted Indirect Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 50kW. SATK32105 - Wall-mounted Indirect Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 60kW. SATK32107 - Wall-mounted Indirect Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 75kW.
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2310022

Range of water meters with brass bodies. The inlets incorporate a plastic filter. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 50°C

Section:
1505 Water Meters
Size:
¾” – 1 ½” BSP (M)
Marking:
NWM on dial and technical info on dial face. Flow arrow on body
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
SJ-LFC/WDC DN15 (3/4” BSP) SJ-LFC/WDC DN20 (1” BSP) SJ-LFC/WDC DN25 (1 ¼” BSP) SJ-LFC/WDC DN32 (1 ½” BSP)
Product Images

Approval Holder:
Ningbo Water Meter (Group) Co., Ltd
Company Name
Ningbo Water Meter (Group) Co., Ltd
Address
No 355 Hongxing Road Jiangbei District Ningbo
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1291 of 2244

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.