Aerator with a plastic body, brass housing and EPDM washer. Maximum operating temperature 85°C.

Section:

0435 Taps and shower valves - Components

Section Subtitle:

Aerators, Flow Straighteners, Flow Regulators and Restrictors.

WRAS Approval Number:

2109334

Note:

Open outlet use only.

Size:

M20 threaded connection

Marking:

Tomlinson on body

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

M200ZC

Approval Holder:

Tomlinson Industries

Company Name

Tomlinson Industries

Address

13700 Broadway Ave Garfield Heights Cleveland

Country

Ohio 44125

Phone

Tel: 216 587 3400 Fax: 216 587 0733

View All Listings by this Company

Headwork assemblies (stainless steel or brass bodies) incorporating a quarter turn ceramic disc with single lever operating member. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

2109031

Size:

½” BSP (M)

Marking:

Vola on operating member

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

S50XX, S50HXX, S50MXX & S50LXX - Stainless Steel Trim Kits. XX denotes surface finish and is replaced with: 40 = Brushed Stainless Steel. 61 = Brushed Black. 64 = Brushed Copper. 70 = Brushed Gold. S50XX, S50HXX, S50MXX & S50LXX - Brass Trim Kits. XX denotes surface finish and is replaced with: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Headwork assemblies (stainless steel or brass bodies) incorporating a quarter turn ceramic disc with single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

2109032

Size:

½” BSP (M)

Marking:

Vola on operating member

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

S50DXX & S50DHXX - Stainless Steel Trim Kits. XX denotes surface finish and is replaced with: 61 = Brushed Black. 64 = Brushed Copper. 70 = Brushed Gold. S50DXX & S50DHXX - Brass Trim Kits. XX denotes surface finish and is replaced with: 02 = Grey. 04 = Blue. 05 = Orange. 06 = Light Green. 08 = Yellow. 09 = Dark Grey. 12 = Mocca. 14 = Bright Red. 15 = Dark Blue. 16 = Chrome. 17 = Gloss Black. 18 = White. 19 = Natural Brass. 20 = Brushed Chrome. 21 = Carmine Red. 25 = Pink. 27 = Matt Black. 28 = Matt White. 60 = Black. B61 = Brushed Black. 62 = Deep Black. 63 = Copper. B64 = Brushed Copper. 65 = Gold. 66 = Dark Gold. 68 = Nickel. B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The connection between the body and the spout incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. The products are supplied with optional ½” BSP (F) x ⅜ BSP (M) brass adaptors and NBR washers for installation on each inlet hose. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2107328

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

Comap on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Jeroni Chef Range: 922138 (Chrome Body/Black Spout). 922139 (Brushed Nickel Body/Black Spout). 922140 (White Body/Grey Spout). 922141 (Black Body / Black Spout). 922145 (Gun Metal Bdy/Black Spout). 922146 (Antique Brass Body/Black Spout). 922147 (Copper Body / Black Spout).

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members and pull-down spray handset. The spout outlet incorporates a plastic aerator. The product is supplied with a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2109364

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

DTC15 on rear of body. Deva on operating member.

Installation Requirements:

R001 R009 R090

Expiry date:

30/09/2026

Model:

SLINKY118 slinky mono sink mixer

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company