'01/U60EP 'O'-rings & gaskets'. Black coloured, injection moulded EPDM 'O' rings & gaskets. Shore hardness 60A. The ‘O’ rings have a tested in-radius size of 0.5mm. The gaskets have a tested in-radius size of 1.0mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

2307517

Expiry date:

31/07/2028

Approval Holder:

LAV.EL. Gomma Srl

Company Name

LAV.EL. Gomma Srl

Address

Via Aldo Moro 20/22 25033 - Cologne (BS)

Country

Italy

Phone

0039.030.70.50.956

General Email

info@lavelgomma.it

View All Listings by this Company

'07148-70' components. Black coloured, compression moulded EPDM components with a shore hardness of 70. Sealing gaskets have an in-radius size of 1.0mm. Sealing membranes have an in-radius size of 0.92mm. Gasket membranes have an in-radius size of 0.85mm. Membrane seals have an in-radius size of 1.0mm. Sealing rings have an in-radius size of 1.0mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

2307523

Expiry date:

31/07/2028

Approval Holder:

Gulf Rubber Group - Tumedei SpA

Company Name

Gulf Rubber Group - Tumedei SpA

Address

Via Bolzano 12, 38061 Ala (TN)

Country

Italy

View All Listings by this Company

‘07146-80’ components. Black coloured, compression moulded EPDM components with a shore hardness of 80. Sealing Gasket with an in-radius of 1.5mm. Membrane Seal with an in-radius of 1.0mm. Sealing Gasket with an in-radius of 1.0mm. Gasket Membrane with an in-radius of 1.0mm. Sealing Ring with an in-radius of 1.0mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

2307524

Expiry date:

31/07/2028

Approval Holder:

Gulf Rubber Group - Tumedei SpA

Company Name

Gulf Rubber Group - Tumedei SpA

Address

Via Bolzano 12, 38061 Ala (TN)

Country

Italy

View All Listings by this Company

'ITK349601'. Black coloured, injection moulded EPDM C-seals. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

2307525

Expiry date:

31/07/2028

Approval Holder:

Italstock S.r.l.

Company Name

Italstock S.r.l.

Address

Via Don Alessandro Ravizza 80, 24060 Castelli Calepio, Bergamo

Country

Italy

View All Listings by this Company

'E24 EPDM Type 2 Seals'. Black coloured, injection moulded EPDM seals. Shore hardness 75. Tested in-radius size of 0.77mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

2308518

Expiry date:

31/08/2028

Approval Holder:

EagleBurgmann Germany GmbH & Co. KG

Company Name

EagleBurgmann Germany GmbH & Co. KG

Address

Aeussere Sauerlacher Str. 6-10, D-82515 Wolfratshausen

Country

Germany

View All Listings by this Company

'SEAEP70'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size 0.8mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

2308524

Expiry date:

31/08/2028

Approval Holder:

Sea Rubber Srl.

Company Name

Sea Rubber Srl.

Address

Via torrente Guerna 9, 24060 Adrara San Martino, BG

Country

Italy

View All Listings by this Company

'E7518'. Black coloured, injection moulded EPDM C-seals. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

2307536

Expiry date:

31/07/2028

Approval Holder:

Trelleborg Sealing Solutions Germany GmbH.

Company Name

Trelleborg Sealing Solutions Germany GmbH.

Address

Schockenriedstraße 1. 70565 Stuttgart

Country

Germany

View All Listings by this Company

'E134-B85-KTW-W270'. Black coloured, compression moulded EPDM material with a shore hardness of 88. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211566

Expiry date:

30/11/2027

Approval Holder:

Seal Maker Produktions- und Vertriebs GmbH

Company Name

Seal Maker Produktions- und Vertriebs GmbH

Address

Viktor-Kaplan Allee 7, A – 7025 Pöttelsdorf

Country

Austria

View All Listings by this Company

'HG02'. Black coloured, compression moulded EPDM sheet material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2310501

Expiry date:

31/10/2028

Approval Holder:

Qingdao Huaguan Valve Co., Ltd.

Company Name

Qingdao Huaguan Valve Co., Ltd.

Address

Wanjia Town, Pingdu, Qingao City, Shandong Province

Country

China

View All Listings by this Company

'SE-618PF'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2210560

Expiry date:

31/10/2027

Approval Holder:

Hun-Yi Rubber Industrial Co., Ltd.

Company Name

Hun-Yi Rubber Industrial Co., Ltd.

Address

No. 40, Lane 193, Hochen Road, Homei Town, Changhua County

Country

Taiwan,

Phone

+(886)47551315

General Email

hunyirubber@yahoo.com.tw

View All Listings by this Company