Directory Search Results

Print List

#241202054

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). For use with: Copper Pipes manufactured in accordance with BS EN 1057 Plastic PB pipes manufactured in accordance with BS 7291-2 Plastic PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure: 6.0 bar @ 65°C Maximum working pressure: 12.0 bar @ 20°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241202054
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
12BAR @ 20°C
Size:
See model
Marking:
Qualflex, QWRAS, 6bar@65°c /12 bar @20°c, DOM (M.YY) stamped on ferrule
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
08SW: DN08 Classic Range, 8mm ID EPDM Liner with Stainless Steel Braiding 10SW: DN10 Classic Range, 10mm ID EPDM Liner with Stainless Steel Braiding 12SW: DN12 Classic Range, 12mm ID EPDM Liner with Stainless Steel Braiding 19SW: DN19 Classic Range, 19mm ID EPDM Liner with Stainless Steel Braiding 25SW: DN25 Classic Range, 25mm ID EPDM Liner with Stainless Steel Braiding Hose assembly part number follows the below format: (The example given is for a Ø8mm internal diameter, Premier Plus Range, 900mm overall length, female to male hose assembly) Fittings codes: M – (MALE) F – (FEMALE) C – (COMPRESSION) S – STANDPIPE E – (ELBOW) J – (JG PUSHFIT) P – (HYDRA PUSHFIT) The hose can further be identified by its description which also specifies the fitting sizes and material:

Manufacturer:
Hydralectric Ltd.
Company Name
Hydralectric Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200

View All Listings by this Company

Print This Approval


#241202063

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). For use with: Copper Pipes manufactured in accordance with BS EN 1057 Plastic PB pipes manufactured in accordance with BS 7291-2 Plastic PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure: 6.0 bar @ 65°C Maximum working pressure: 12.0 bar @ 20°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241202063
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
Qualflex, QWRAS, 6bar@65°c /12 bar @20°c, DOM (M.YY) stamped on ferrule
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
T01001 - 15mm Brass C (Compression) and ½” F (Female) T01002 - 15mm Brass C (Compression) and ½” Plastic F (Female) T01003 -15mm Brass C (Compression) and ¾ ” Plastic F (Female) T01004 -15mm Brass C (Compression) and ½” Plastic F (Female) T01005 - 15mm Brass C (Compression) and ¾ ” Plastic F (Female) T01006 - 15mm Brass C (Compression) and 1/2 ” Plastic F (Female) T01007 - 22mm Brass C (Compression) and ¾” Plastic F (Female) T01008 - 15mm Brass C (Compression) and 1/2 ” Plastic F (Female) T01009 - 22mm Brass C (Compression) and 3/4 ” Plastic F (Female) T01010 - 22mm Brass C (Compression) and 3/4 ” Plastic F (Female) T01011 - 22mm Brass C (Compression) and 3/4 ” Plastic F (Female) T01012 - 15mm Brass C (Compression) and 15mm Brass C (Compression) T01013 - 22mm Brass C (Compression) and 22mm Brass C (Compression) T01014 - 15mm Brass C (Compression) and ½” Brass F (Female) T01015 - 15mm Brass C (Compression) and ½” Plastic F (Female) T01016 - 22mm Brass C (Compression) and 3/4” Plastic F (Female) T01017 - ½” Brass F (Female) and ½” Brass F (Female) T01018 - 15mm Hydra Pushfit (P) and 15mm Hydra Pushfit (P) T01019 - 22mm Hydra Pushfit (P) and 22mm Hydra Pushfit (P) T01020 - 15mm Hydra Pushfit (P) and ½” Plastic F (Female) T01021 - 15mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01022 - 22mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01023 - 15mm Hydra Pushfit (P) and 1/2” Plastic F (Female) T01024 - 15mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01025 - 22mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01026 - 15mm Hydra Pushfit (P) and 1/2” Plastic F (Female) T01027 - 22mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01028 - 15mm Brass C (Compression)and 1/2” Brass FE (Female Elbow) T01029 - 15mm Brass C (Compression) and 1/2” Brass FE (Female Elbow) T01030 - 15mm Hydra Pushfit (P) and 1/2” Brass FE (Female Elbow) T01031 - 10mm Brass Male (M) and 15mm Brass C (Compression) T01032 - 12mm Brass Male (M) and 15mm Brass C (Compression) T01033 - 10mm Brass Male (M) and 15mm Hydra Pushfit (P) T01034 - 12mm Brass Male (M) and 15mm Hydra Pushfit (P)

Approval Holder:
UK Plumbing Supplies Ltd
Company Name
UK Plumbing Supplies Ltd
Address
Quayside 2A Wilderspool Park Greenalls Avenue Cheshire
Postcode
WA4 6HL

View All Listings by this Company

Print This Approval


#250102057

Range of EPDM lined hoses with grey PVC outer layer. Maximum working pressure: 16 bar. Maximum working temperature: 60°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250102057
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (F)
Marking:
Virhoplast, WRAS, 20 BAR, 60°C MAX, Made in Italy, YYYY (Year of manufacture) on tube, WRAS on ferrule/bush
Installation Requirements:
R001 R001
Expiry date:
31/01/2030
Model:
DN13CARF/C150 INLET HOSE D.13X19 WITH ELBOW, LENGTH 1500MM DN13CARF/C200 INLET HOSE D.13X19 WITH ELBOW, LENGTH 2000MM DN10CARF/C150 INLET HOSE D.10X16 WITH ELBOW, LENGTH 1500MM DN10CARF/C200 INLET HOSE D.10X16 WITH ELBOW, LENGTH 2000MM

Manufacturer:
Virhoplast SRL
Company Name
Virhoplast SRL
Address
Via Magenta nr. 77 - INT 13/C 20017 RHO (MI) Italy

View All Listings by this Company

Print This Approval


#241002021

Range of wall mounted (some concealed – see models) thermostatic blending valves with brass bodies (various finishes), incorporating single sequential headworks with single lever operating members. The inlet couplings incorporate plastic flow regulators & metal strainers. The outlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Taizhou Evergreat on the handle.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
EG1909001 – chrome plating – ¾” BSP (F) (concealed), EG1909001MB – matt black – ¾” BSP (F) (concealed), EG1909001BB – brushed gold – ¾” BSP (F) (concealed), EG1909001BRN – brushed nickel – ¾” BSP (F) (concealed), EG1909002 – chrome plating – ¾” BSP (F) (concealed), EG1909002MB – matt black – ¾” BSP (F) (concealed), EG1909002BB – brushed gold – ¾” BSP (F) (concealed), EG1909002BRN – brushed nickel – ¾” BSP (F) (concealed). EG1606009 – chrome plating - 3/4" BSP M x 1/2" BSP M Union Offset, EG1606010 – chrome plating - 3/4" BSP M x 1/2" BSP M Union Offset, EG1606011 – chrome plating - 3/4" BSP M x 1/2" BSP M Union Offset.

Approval Holder:
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Company Name
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Address
Xiaqiu Industrial Area Qinggang Town Yuhuan
Country
China
General Email
sales@tzevergreat.com

View All Listings by this Company
Manufacturer:
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Company Name
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Address
Xiaqiu Industrial Area Qinggang Town Yuhuan
Country
China
General Email
sales@tzevergreat.com

View All Listings by this Company

Print This Approval


#241102013

Range of floor standing, shower to shower, thermostatic blending valves (brass or stainless steel, various finishes, see models). Incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a self-cancelling diverter to overhead shower with a dome operating member. The outlet of the diverter incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also supplied with shower hose and shower handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241102013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
VOLA on diverter operating member.
Installation Requirements:
R001 R030
Expiry date:
30/11/2029
Model:
VOLA FS3-XX Brass & stainless steel. The suffix “XX” denotes the finish and means: For Brass: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark, Blue, 16=Chrome, 17=Gloss, Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Silver, B61=Brushed Black, B64=Brushed Copper, B70=Brushed Gold. For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper

Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 128 of 186

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.