Range of electronic pump controllers with plastic bodies. Maximum working pressure 12.0 Bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

COELBO CONTROL SYSTEM, S.L and technical information on adhesive label on body. Speedmatic on control panel.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

S101083 Speedmatic 101110 MASTER CB (1.1/4” BSP (M)) S101541 Speedmatic 101110 (1.1/4” BSP (M)) S101104 Speedmatic easy CB (1.1/4” BSP (M)) S101542 Speedmatic easy (1.1/4” BSP (M)) S101543 Ecodrive (1” BSP (M)) U471037 Onematic (1.1/4” BSP (M))

Product Images

Manufacturer:

COELBO CONTROL SYSTEM, S.L.

Company Name

COELBO CONTROL SYSTEM, S.L.

Address

Ctra. De Rubí, 288 Terrassa

Postcode

08228

Country

Spain

View All Listings by this Company

Range of pressure transducers with stainless steel bodies. Maximum working pressure 10.0 Bar, 20 Bar or 40 Bar. Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

9mm spigot for insertion into a quick release coupling or 1/4" BSP male.

Marking:

ABB, WRAS, Part number, Pressure range and technical info on adhesive label.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

3KXF004496U0100 - 9mm spigot. 10 bar, 3KXF004496U0200 - 9mm spigot. 10 bar, 3KXF004496U0500 - 9mm spigot. 20 bar, 3KXF004496U0600 - 9mm spigot. 20 bar, 3KXF004496U0700 - 1/4" BSP male. 40 bar, 3KXF004496U0800 - 1/4" BSP male. 40 bar, 3KXF004496U0900 - 9mm spigot. 20 bar.

Product Images

Approval Holder:

ABB Ltd.

Company Name

ABB Ltd.

Address

Oldends Lane, Stonehouse, Glos.

Postcode

GL10 3TA

View All Listings by this Company

Range of booster sets, incorporating a stainless-steel manifold system and between 2 and 5 pumps depending on model. The booster sets also incorporate spherical valves, non-return valves, pressure switches/sensors and expansion vessels. Maximum working pressure 16.0 Bar. Maximum operating temperature 25.0°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241202019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN 50 to DN 200

Marking:

Armstrong and product info on adhesive label on pump.

Installation Requirements:

R001 R415

Expiry date:

31/12/2029

Model:

6800 DE 2-3 Pump VMS 4 2-3 Pump VMS 6 2-5 Pump VMS 10 2-5 Pump VMS 15 2-5 Pump VMS 25 2-4 Pump VMS 40 2-4 Pump VMS 60

Product Images

Manufacturer:

Armstrong Fluid Technology

Company Name

Armstrong Fluid Technology

Address

1 Woverton Street Manchester M11 2ET

Postcode

M11 2ET

Country

United Kingdom

View All Listings by this Company

Range of shower booster pumps with brass bodies and plastic impellers. The body incorporates a single check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure: 4.0 bar. Maximum operating temperature: 70°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Flowflex, flow arrow and BS6282-5 on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

SP2B, SP1 (same as SP2B without electronics), SP22S (2 x SP2B connected electronically), SP21S (1 x SP2B & 1 x SP1 connected electrconically), SP2U (SP2B without transformer), SP1U (SP1 without transformer).

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

‘UPM10’ and ‘UPM20’ range of circulator pumps with a stainless-steel body, plastic impellor and EPDM ‘O’-rings. The product is supplied with EPDM gaskets for the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241207701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo, type and model on nameplate on motor housing. P/N no., P/C no., Serial (S/N) no., technical info, manufacturing country and data matrix on end of motor housing. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

UPM 10M 25-95 N 180, UPM 10L 25-105 N 180, UPM 10XL 25-125 N 180, UPM 20S 25-145 N 180. Where: Pump type: UPM 10M, UPM 10L, UPM 10XL, UPM 20S. Control variant: []: PWM, LIN: LIN bus input signal, 0-10V, AUTO, HYBRID, SOLAR, DHW. Nominal diameter: 25: G 1½”. Max. Head: 95: 9.5m, 105: 10.5m, 125: 12.5m, 145: 14.5m. Designation/Pump housing: N 180: Stainless steel body, 180mm port to port length. Control box orientation: 3: 3 o’clock (right), 6: 6 o’clock (below), 9: 9 o’clock (left). Customer code: XXX (no impact on water contact parts).

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company