Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2310908

Range of plastic shower hoses (various finishes) incorporating PEX inner liner, with EPDM washers.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2310908
Size:: 1/2" BSP (F) conical nuts.
Marking:: HRN (trademark for APIS (Xiamen) Co Ltd), date of manufacture (YY)
Installation Requirements:: R001
Expiry date:: 31/10/2028
Model:: 151-X-X-X-X-X-X-X The first X code of hose diameter, 0 = DN8 Second and third X code = Length (50-250CM) Forth X code hose colour, 1=Black, 2=Silver and 3=Rose The fifth X code inlet connection, 1 = F1/2” The sixth X code outlet connection, 1 = F1/2” The Seventh X code inner tube material, 1 = PEX

Product Images

Approval Holder:: APIS (Xiamen) Co., Ltd.

Company Name
APIS (Xiamen) Co., Ltd.
Address
1F, 5F, Main building No 198-204 YingYao Road
Country
Jimei District

View All Listings by this Company

WRAS Approval Number: #2310102

‘Comfortflex’ range of silver braided shower hoses with a TPE inner hose and EPDM seals.Open outlet

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2310102
Size:: ½” BSP captive nut.
Marking:: Hansgrohe on nut.
Installation Requirements:: R001
Expiry date:: 31/10/2028
Model:: 28 167 002, 28 167 xx0, 28 168 xx0, 28 169 002, 28 169 xx0, 28 162 002, 28 160 002. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #2110140

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2110140
Size:: See model
Marking:: Tenby, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve.
Installation Requirements:: R001
Expiry date:: 31/10/2026
Model:: AX-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. AX-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. AX-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. AX-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. AX-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. AX-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. AX-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). AX-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). AX-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). AX-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). AX-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. AX-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. AX-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. AX-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. AX-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. AX-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). AX-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). AX-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. AX-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. AX-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. AX-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. AX-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. AX-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit AX-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. AX-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. AX-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). AX-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). AX-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Approval Holder:: Tenby Imports & Exports Ltd.

Company Name
Tenby Imports & Exports Ltd.
Address
Unit 1 Crown House, Otterspool Way, Watford, Hertfordshire
Postcode
WD25 8HL

View All Listings by this Company

WRAS Approval Number: #2310078

Range of automatic air vent valves with blue epoxy coated cast iron bodies and EPDM seats. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 2310078
Size:: 1” to 2” BSP (F) (STV-AVS01), DN40 to DN200 Flanged (STV-AV02).
Marking:: SITG, PN, Size and other technical info on Data Plate. (STV-AVS models). SITG, PN, DN and other technical info on Data Plate. PN and DN on body (STV-AV02 models).
Installation Requirements:: R001 R120
Expiry date:: 31/10/2028
Model:: STV-AVS01 - SMALL ORIFICE AIR VALVE. STV-AV02 - DOUBLE CHAMBER TRIPLE FUNCTION AIR VALVE.

Product Images

Approval Holder:: Suntex Import & Export Trading Co. Ltd.

Company Name
Suntex Import & Export Trading Co. Ltd.
Address
RM1108 ZHONGYUAN BLDG, No. 368 You Yi North Street, Shijazhuang, Hebei
Country
China

View All Listings by this Company

WRAS Approval Number: #2310030

Range of wall mounted, manually operated blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating members. The shower outlet connection incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The products are not supplied with shower hoses and handsets. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 2000 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control.
WRAS Approval Number:: 2310030
Size:: ½” BSP (M)
Marking:: AXOR on body.
Installation Requirements:: R001 R010 R040
Expiry date:: 31/10/2028
Model:: 34 620 xxx - Axor Citterio M, 38 621 xxx – Axor Uno, 45 600 xxx – Axor Uno. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company