Range of spring loaded, resilient trim check valve cartridges with plastic body. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0026 Backflow Prevention Devices

Section Subtitle:

Check Valve Cartridge(s) The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

241204709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15, DN20 & DN25.

Marking:

W (Watts logo – Socla is a unit of the Watts Group), DN & flow arrow on body. Models WM020 & WM025 also have Ocean on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

Type TK range: Model WM015 (Ref W149015600 or 149B043318): DN15. Model WM020 (Ref W140020600 or 149F043509): DN20. Model WM025 (Ref W140025600 or 149F043510): DN25.

Approval Holder:

Socla SAS

Company Name

Socla SAS

Address

365, Rue du Lt Putier, 71530 Virey Le Grand, France

Phone

+33 3 85 97 42 42

View All Listings by this Company

Spring loaded, resilient trim, in-line check valve cartridge with NBR & EPDM ‘O’-rings, plastic guide, stem and body. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 8.6 Bar. Maximum operating temperature 60°C.

Section:

0026 Backflow Prevention Devices

Section Subtitle:

Check Valve Cartridge(s) The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

250102709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

12.8mm OD

Marking:

SOLEX on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

T10193

Product Images

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

View All Listings by this Company

Range of non-verifiable double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. The products incorporate a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0034 Backflow Prevention Devices

Section Subtitle:

Non-verifiable double check valve assembly - Type ED. Providing Fluid Category 3 protection. Verified by test.

WRAS Approval Number:

250104709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½”, ¾” & 1” BSP (F)

Marking:

VIR logo, CR, PN16 DN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

782DR Double Check Valve

Approval Holder:

VIR Valvoindustria Ing. Rizzio S.p.A.

Company Name

VIR Valvoindustria Ing. Rizzio S.p.A.

Address

Via Circonvallazione n. 10, 13018 Valduggia (VC)

Country

Italy

View All Listings by this Company

Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly (chromium plated brass body) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

250102016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The product is supplied with a lever type pop-up waste – not verified by test.

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections

Marking:

Dornbracht on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2030

Model:

33600671

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

View All Listings by this Company

Ceramic cartridge headwork with a plastic body and EPDM seals, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

241204022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

26.92mm OD.

Marking:

HG on the body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

30 614 320.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company