Range of copper or stainless-steel brazed heat exchangers available with various number of plates as listed below. Maximum working pressure 25.0 Bar (copper brazed models). Maximum working pressure 10.0 Bar (stainless steel brazed models). Maximum operating temperature 100.0°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

4G3/4 models = ¾” BSP, 4AYB models = 8mm porthole (XB05H-1-xx-2STS_10/10_S1_4AYB Only) or 15mm porthole for all other models, 4clip models = 15mm ID clip connection.

Marking:

DANFOSS logo, model code, date of manufacture (YYYY/WW), PN and other technical data laser engraved into the body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

XB05M-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2CU_25/25_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4AYB, XB05X-1-xx-2CU_25/25_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-xx-2STS_10/10_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-20-2CU_25/25_S1_4Clip, XB05X-1-20-2STS_10/10_S1_4Clip, XB05H-1-xx-2CU_25/25_S1_4Clip, XB05H-1-xx-2STS_10/10_S1_4Clip. XB05 - frame size (XB05 = 312 mm x 76 mm) M, X, H - heatplate corrugation (different dimple design) - 1 - one pass heat exchanger (all XB05 range is one pass) “xx” = number of plates from 8 to 70. HP material = always 2; meaning material of heatplate which is always 1.4404. Brazing material = Stainless steel brazed = StS, Copper brazed = Cu. Pressure = approved pressure for primary and secondary channels (for XB05 is 25 bar when copper brazed and 10 bar when stainless steel brazed visible from application list in 202_f2). Connection configuration = position of connections (on XB05 only S1 applies). Connection type = G3/4 threaded ¾ connections AYB -no connections. Clip - tailormade solder and / or clip connections; usually tailormade for specific customer.

Product Images

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Range of water meters with cast iron bodies (blue epoxy coating) and EPDM ‘O’ rings. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 (200mm) & DN150 (500mm)

Marking:

SENSUS on cover. Cordonel, DN, Max pressure and other technical information on meter face. Size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

GN Q3 40 – Cordonel DN50 (200mm) GN Q3 400 – Cordonel DN150 (500mm)

Approval Holder:

Sensus UK Systems Ltd

Company Name

Sensus UK Systems Ltd

Address

North Wing Central 40, Crockford Lane, Basingstoke, RG24 8GU

Country

Basingstoke

View All Listings by this Company

Manufacturer:

Sensus GmbH Hannover

Company Name

Sensus GmbH Hannover

Address

Meineckestrasse 10 Laatzen 30880 Germany

View All Listings by this Company

Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperatures Sizes DN15-25 models: 50°C, sizes DN32-40 models: 85°C.

Section:

1505 Water Meters

Size:

See model.

Marking:

GAER and product info on dial. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

GMS DN15 GAER: ¾” BSP (M), GMS DN20 GAER: 1” BSP (M), GMS DN25 GAER: 1¼” BSP (M). GMS DN32 GAER: 1½” BSP (M), GMS DN40 GAER: 2” BSP (M).

Approval Holder:

Hidroglobal Tecnologia del Agua S.A.

Company Name

Hidroglobal Tecnologia del Agua S.A.

Address

C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS

Postcode

08150

Country

Spain

Phone

+34 93 573 74 00

General Email

acalderon@regaber.com

View All Listings by this Company

Range of in-line water meters with either a brass or plastic composite body. The product incorporates a plastic strainer on the inlet. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

DIEHL metering, model code and product information on dial face. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Aries 15/110 Composite Body ¾” BSP (M) Aries 15/110 Brass Body ¾” BSP (M) Aries 20/130 Brass Body 1” BSP (M)

Product Images

Approval Holder:

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Company Name

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Country

View All Listings by this Company

Manufacturer:

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Company Name

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Country

View All Listings by this Company

Range of in-line water meters with brass bodies. The inlets incorporate a plastic filter. The outlets incorporate a non-return valve (not intended for or suitable for backflow protection). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M), 1” BSP (M) & 1¼” BSP (M)

Marking:

Shenzhen Kaifa logo, date of manufacture (YYYY), model & technical info on meter face.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

MA408K

Product Images

Approval Holder:

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Company Name

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Address

No 99 Tianquan Hi Tech Development Zone Chengdu PRC

General Email

xingweiyang@kaifa.com

View All Listings by this Company

Manufacturer:

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Company Name

Shenzhen Kaifa Technology (Chengdu) Co., Ltd.

Address

No 99 Tianquan Hi Tech Development Zone Chengdu PRC

General Email

xingweiyang@kaifa.com

View All Listings by this Company