Shower Valves

Section Code 2010 : Shower valve(s) with thermostatic temperature control

Back To Directory Sections

#240888003

Range of wall mounted, thermostatic bar shower mixers (brass bodies – various finishes), incorporating a quarter turn ceramic disc headwork that controls the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Products incorporate a half turn ceramic disc headwork that diverts the flow to an overhead shower or shower handset. Both inlets incorporate an approved check valve cartridge and stainless steel strainers however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 60 C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240888003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½”x ¾” BSP (M) offset unions 15mm compression
Marking:
PPI on rear of valves
Installation Requirements:
R001 R010 R040
Expiry date:
31/08/2029
Model:
SHKT0007662 DUAL OUTLET CHROME SHKT0007663 DUAL OUTLET MATT BLACK SHKT0007664 DUAL OUTLET BRUSHED BRASS

Approval Holder:
Mobility Bathing Group Limited
Company Name
Mobility Bathing Group Limited
Address
20-21 Padgets Lane South Moon Moat Redditch
Postcode
B98 ORA

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China

View All Listings by this Company

Print This Approval


#240988027

Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating quarter turn ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240988027
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½”x ¾” BSP (M) offset unions or 15mm compression.
Marking:
PPI on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
SHMXJI0007653 CHROME SHMXJI0007654 MATT BLACK SHMXJI0007655 BRUSHED BRASS

Approval Holder:
Mobility Bathing Group Limited
Company Name
Mobility Bathing Group Limited
Address
20-21 Padgets Lane South Moon Moat Redditch
Postcode
B98 ORA

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China

View All Listings by this Company

Print This Approval


#250302018

Range of wall mounted thermostatic bar shower mixers ((brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever type operating members. Models come with either 2,3 or 4 push type headworks for different functions. The inlet incorporates approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Products are supplied with a shower handset, shower hose. The products need to be installed in combination with a specific basic set. 12 571 xx0= 18310180 Basic set for thermostatic module Select for 2 functions (WRAS 2207061) 12 572 xx0= 18311180 Basic set for thermostatic module Select for 3 functions (WRAS 2207061) 12 573 xx0= 18312180 Basic set for thermostatic module Select for 4 functions (WRAS 2207061) Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
To be used with basic set Hansgrohe 18 312 180
Marking:
AXOR on face plate and shower handset
Installation Requirements:
R001 R040
Expiry date:
31/03/2030
Model:
12 571 xx0 12 572 xx0 12 573 xx0 Note: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250302019

Wall mounted thermostatic shower panel ((brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever type operating members. Model has 3 push type headworks for different functions. The inlet incorporates approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Products are supplied with a shower handset, shower hose. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
For use with various rough kits that are 3/4" BSP (F) or 1/2" BSP (F) inlet/outlet
Marking:
AXOR on shower handset and trim set
Installation Requirements:
R001 R040
Expiry date:
31/03/2030
Model:
12 595 xxx Product must be installed with AXOR shower composition basic set 12 676 180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241188018

Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating quarter turn ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241188018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression or ½” x ¾” off-set unions.
Marking:
Aqualisa on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2029
Model:
707668 Valve Assy (inc flow restrictor)

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 120 of 123

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.