Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241002071

Range of wall mounted concealed thermostatic blending valves with (brass bodies - various finishes,). The product incorporates a manual diverter valve which can be limited to control the flow between 1, 2 or 3 outlets, a separate thermostatic cartridge controls the temperature. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 241002071
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The valves are available in 1-, 2- and 3-way versions. The 1 and 2-way valves have a physical stop fitted to limit the diverter rotation and there are the corresponding number of dots on the cover plate. ie Off + 1 dot for the 1-way; Off + 2 dots for the 2-way and Off + 3 dots for the 3-way. The actual valve is the same in all cases.
Size:: 3/4" BSP (F) inlets x 1/2" BSP (F) Outlets
Marking:: Tissino on faceplate
Installation Requirements:: R001 R040
Expiry date:: 31/10/2029
Model:: Concealed valve TTB-100 Thermobox shower valve Face-plate and Handle set TMA-115-P (3 outlet model, chrome) TMA-116-P (1 outlet model, chrome) TMA-117-P (2 outlet model, chrome TLC-202-xx-P (3 outlet model, various finishes) TLC-203-xx-P (1 outlet model, various finishes) TLC-204-xx-P (2 outlet model, various finishes) Where ‘xx’ shown, this denotes the surface finish and can be replaced with any of the following surface finish designations, for example: MN = Matt Black BB = Brushed Brass

Product Images

Approval Holder:: Tissino Ltd.

Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

WRAS Approval Number: #240602075

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 240602075
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:: BOME, CR and size on body. BOME on label on cap.
Installation Requirements:: R001 R040 R120
Expiry date:: 30/06/2029
Model:: T08T151C,T08T221C T08T155C & T08T225C

Approval Holder:: Bome Srl

Company Name
Bome Srl
Address
via Allo Strego 1 Cavallirio 28010 Cavallirio
Country
Italy

View All Listings by this Company
Manufacturer:: Bome Srl

Company Name
Bome Srl
Address
via Allo Strego 1 Cavallirio 28010 Cavallirio
Country
Italy

View All Listings by this Company

WRAS Approval Number: #240602076

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. The inlet adaptors for models DT400MX15CP & DT400MX22CP are 90° elbows instead of straight adaptors and incorporate additional integral spherical valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 240602076
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:: IMIX DELTA, CR and size on body. IMIX DELTA on label on cap.
Installation Requirements:: R001 R040 R120
Expiry date:: 30/06/2029
Model:: DT40015CP, DT40022CP DT400MX15CP & DT400MX22CP

Approval Holder:: Intatec Limited

Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

WRAS Approval Number: #240702075

Range of gear operated butterfly valves with blue epoxy coated ductile iron bodies. Maximum working pressure 16 Bar Maximum operating temperature 80°C

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 240702075
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN150 – DN1400 Flanged
Marking:: EJV, size, PN, and product info on body
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: D341X

Approval Holder:: SUZHOU EJ INDUSTRY CO., LTD

Company Name
SUZHOU EJ INDUSTRY CO., LTD
Address
Room 801 Building A, Building 44,Hefeng Science and Technology Innovation Park, NO.2 Taishan Road High-tech Zone Suzhou city, Jiangsu Province
Country
China

View All Listings by this Company

WRAS Approval Number: #240602074

Range of butterfly valves with blue epoxy coated, ductile iron bodies and handwheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 240602074
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN200 - DN1800
Marking:: Talis, PN, size and material type on body. Talis, Evolution, Size, PN, date of manufacture (DD-MMM-YYYY) and product info on plate on body.
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: EVOLUTION RANGE BUTTERFLY VALVES DN200 – DN1800 OPAP EVOLUTION RANGE BUTTERFLY VALVES DN200 – DN1800

Approval Holder:: Bayard

Company Name
Bayard
Address
4 Avenue Lionel Terray, 69330, Meyzieu
Country
France

View All Listings by this Company
Manufacturer:: Talis Flow Control (Shanghai) Co. Ltd.

Company Name
Talis Flow Control (Shanghai) Co. Ltd.
Address
A13 Building NO. 5399 Waiqingsong Road Qingpu District Shanghai
Postcode
201707
Country
China
Phone
+86 135 6497 9779

View All Listings by this Company