Range of tap outlets with plastic bodies incorporating a filter within the body with a hollow fibre filter membrane The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a plastic flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2212320

Note:

Claims made by the manufacturer of performance have not been assessed and are not part of this approval

Size:

Please refer to model.

Marking:

T Safe logo, data matrix code, Model No and other tech info on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

02-831200 Medical Tap Filter 92 Day, Standard Flow (19.33mm pushfit). 02-831201/02-831201CE Medical Tap Filter 92 Day, Laminar Flow (19.29mm pushfit). 02-831202 Medical Tap Filter 31 Day, Standard Flow (19.08mm pushfit). 02-831203/02-831203CE Medical Tap Filter 31 Day, Laminar Flow (19.34mm pushfit). 02-831204 Medical Tap Filter 92 Day, Standard Flow, Sterile Packed (19.33mm pushfit). 02-831205 Medical Tap Filter 92 Day, Laminar Flow, Sterile Packed (19.29mm pushfit). 02-831206 Medical Tap Filter 31 Day, Standard Flow, Sterile Packed (19.08mm pushfit). 02-831207 Medical Tap Filter 31 Day, Laminar Flow, Sterile Packed (19.34mm pushfit). Models added August 2024: 02-831210 Medical Tap Filter Side Mount 62 day LF (19.29mm pushfit). 02-831212 Medical Tap Filter Side Mount 62 day SF (19.33mm pushfit).

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

CR(N)(E) ranges of vertical multistage centrifugal pumps with stainless steel (CRN models) or black polymer coated cast iron bodies (CR models) and a stainless steel impeller. The products are available with or without a sensor. Maximum working pressure: 16.0 bar - CR(N)(E) 32 range with 1-7 stages, CR(N)(E) 45 range with 1-5 stages, CR(N)(E) 64 range with 1-5 stages. 30.0 bar - CR(N)(E) 32 range with 8-14 stages, CR(N)(E) 45 range with 6-11 stages, CR(N)(E) 64 range with 6-8 stages. 33.0 bar - CR(N)(E) 45 range with 12-13 stages. Maximum operating temperature - CR models are cold water use only. CRN models are cold water use only up to February 2nd 2023, and 99°C from February 3rd 2023.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301900

Size:

CR/CRN 32: CR/CRN 32, 1-14 stages: DN65 and DN80 flange connection. CRN32, 1-14 stages: 3” PJE connection CR/CRN 45: CR/CRN 45, 1-13 stages: DN80 and DN100 flange connection. CRN45, 1-13 stages: 4” PJE connection. CR/CRN 64: CR/CRN 64, 1-8 stages: DN100 flange connection. CRN64, 1-8 stages: 4” PJE connection.

Marking:

Grundfos and Grundfos logo, model, type, prod/version no., technical information and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

CR/CRN(E) 32-A-B C-D-E-F-XXXX, CR/CRN(E) 45-A-B C-D-E-F-XXXX, CR/CRN(E) 64-A-B C-D-E-F-XXXX. Where: Type range: CR = Pump type and Cast Iron, N = EN 1.4401, E = Preminum Electronically Controlled Motor. 32, 45 or 64 = flow rate m³/h, A = number of impellers (CR/CRN 32 1-14, CR/CRN 45 1-13, CR/CRN 64 1-8). B = number of reduced impellers: 0, 1 or 2 on CR/CRN 32 1-7, CR/CRN 45 1-5, CR/CRN 64 1-8 models, 0 or 2 on all other models. C = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, K = Pump with low NPSH, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange, D = Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). E = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. F = Code for rubber parts: E = EPDM, V = Viton. XXXX = Code for shaft seal: HQQE or V / HUUE or V / HUBE or V /HQBE or V. H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide, E = EPDM, V = Viton. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘UPM4’ range of circulator pumps with either a composite (plastic) or stainless-steel body, plastic impellor and EPDM ‘O’-rings. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C ((CIL3) plastic body models), 99°C (S/Steel body models).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211908

Note:

R008 does not apply to the stainless steel body models. R415 does not apply if used on a closed circuit.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and date of production (PC code = PC: YYWWxxx) on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2027

Model:

UPM4/UPM4L A BBB CC-DD E EEE F GGG Where: UPM4 - pump series type - standard, UPM4L - pump series type - large (motor) version with extended P1. UPM4XL (Added October 2024) - Extra-large version with extended performance. UPM4XXL (Added June 2025) - Extra-large version with extended performance. A = K - for condensing environments. BBB = Control variant - PWM or LIN bus. CC = Nominal diameter - 15 = G1”, 25 = G1½”, 32 = G2”. DD = Maximum head, value divided by 10 = head in m, e.g. 20 = 2.0m. Can be 20, 30, 40, 45, 50, 55, 60, 65, 70, 75, 90 or 100. (90 variant added October 2024. 100 variant added June 2025). E EEE = Pump housing and port length. N 130 and N 180 = Stainless steel and 130 or 180mm port length. CIL3PP = Composite (plastic), which is only available as 130mm port length, so no value Is mentioned. F = Control box orientation. Can be 3, 6, 9, or 12. GGG = Customer code. Can be any combination or letters and numbers.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of chrome plated shower kits. Consisting of shower handsets, shower hoses that incorporate EPDM O-rings and riser rails. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2210902

Size:

1/2" BSP (F) Conical nuts.

Marking:

Deva on handsets

Installation Requirements:

R001 R040

Expiry date:

31/10/2027

Model:

KITS12 KITS13 KITM07

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of shower handsets with ABS plastic bodies (various finishes, see models). Maximum operating temperature (see models).

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211019

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

KY-LIN on body.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

88500075 - Chromium plated (75°C), 88500106 - Satin Blacked (75°C), 88500082 - Chromium plated (75°C), 88500074 - White coloured (60°C), 88500081 - White coloured (60°C), 88500069 – Satin Chromed (60°C), 88500099 - Satin Blacked (75°C), 88500070 - Chromium plated (75°C), 88500062 - White coloured (60°C), 88500061 - Chromium plated (75°C), 88500060 - White coloured (60°C), 88500068 – Satin Chromed (60°C), 88500083 - Chromium plated (75°C), 88500086 - White coloured (60°C), 88500084 - White coloured (60°C), 88500085 - Chromium plated (75°C). Model added October 2024 88500112 - Chromium plated (60 C).

Approval Holder:

KYLIN Sanitary Technology (Xiamen) Co., Ltd

Company Name

KYLIN Sanitary Technology (Xiamen) Co., Ltd

Address

No.878, Tongfu Road, Tong’an District, Xiamen City, Fujian Province

Postcode

361100

Country

China

Phone

+86 159 8082 4540

General Email

961459820@qq.com

View All Listings by this Company

Manufacturer:

KYLIN Sanitary Technology (Xiamen) Co., Ltd

Company Name

KYLIN Sanitary Technology (Xiamen) Co., Ltd

Address

No.878, Tongfu Road, Tong’an District, Xiamen City, Fujian Province

Postcode

361100

Country

China

Phone

+86 159 8082 4540

General Email

961459820@qq.com

View All Listings by this Company