Range of cross and parallel flow water plate heat exchangers with stainless steel bodies. Maximum working pressure primary circuit: 3.0 bar, secondary circuit: 10.0 bar. Maximum operating temperature 80°C.

Section:

1350 Heat Exchangers

Size:

15.7mm ID

Marking:

CONDEVO SpA, model and date of manufacture (DD/MM/YY) on label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Type “W” range of cross and parallel flow heat exchangers, model code is as follows: PP aaFWywRxx. Where: aa = number of plates (from 10 to 34 plates). F = parallel flow. W = identifies shape of plates. y = type of stainless steel, 4 for AISI304L and 6 for AISI316L w = type of coupling plate R (distance between holes 42mm), Q (only for crossed flow) Rxx = coupling plate with xx replaced with numbers denoting distance between holes.

Product Images

Approval Holder:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Manufacturer:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Range of electric combination boilers providing heating and instantaneous hot water. The heating system incorporates an expansion vessel and pressure relief valve (set at 3.0 bar). The DHW inlet and outlet incorporate spherical servicing valves. Fittited with a CAB device keyless filling link, verifired by test, suitable for category 3 backlfow protection. Maximum working pressure on central heating circuit 2.5 bar & Domestic Hot Water 10bar. Maximum operating temperature 80°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2205321

Size:

15mm compression x 22mm compression.

Marking:

E.C.A on front casing. Manufacturer, address, model no, QR code and other technical information on side panel.

Installation Requirements:

R001 R140

Expiry date:

31/05/2027

Model:

8116270010 - Arceus/Cure plus/Electus EK 12 MT UK, 8116271010 - Arceus/Cure plus/Electus EK 15 MT UK, 8116272010 - Arceus/Cure plus/Electus EK 18 MT UK 8116273010 - Arceus/Cure plus/Electus EK 24 MT UK & 8116274010 - Arceus/Cure plus/Electus EK 27 MT UK

Product Images

Approval Holder:

Emas Makina Sanayi A.S.

Company Name

Emas Makina Sanayi A.S.

Address

Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa

Postcode

45030

Country

Turkey

General Email

egecakmakci@emas.com.tr

View All Listings by this Company

Manufacturer:

Emas Makina Sanayi A.S.

Company Name

Emas Makina Sanayi A.S.

Address

Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa

Postcode

45030

Country

Turkey

General Email

egecakmakci@emas.com.tr

View All Listings by this Company

Hydraulic block incorporating heat exchangers with pressed stainless-steel plate bodies and copper brazing. Product also incorporates primary and secondary water way with PPS plastic fittings and adaptors and a flow adjustment valve. Maximum operating temperature: Central Heating Circuit: 90°C, Direct Hot Water Circuit: 65°C. Maximum working pressure: Central Heating Circuit: 2.5 bar, Direct Hot Water Circuit: 10 bar.

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

2205056

Size:

DHC: ½” BSP (M) inlet and outlet CH: ¾” BSP (M) inlet and outlet

Marking:

KD One and model on adhesive label, Navien on pump housing.

Installation Requirements:

R001

Expiry date:

31/05/2027

Model:

NCB500 HYDRAULIC BLOCK RANGE: 30029106 & 30029299

Product Images

Approval Holder:

KD Navien Co Ltd

Company Name

KD Navien Co Ltd

Address

4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea

Phone

+82 2 3489 2200

General Email

www.navien.com

View All Listings by this Company

Manufacturer:

KD Navien Co Ltd

Company Name

KD Navien Co Ltd

Address

4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea

Phone

+82 2 3489 2200

General Email

www.navien.com

View All Listings by this Company

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110119

Size:

NKV1-NKV3 models - F (round flange) versions: DN25. NKV6-NKV20 models - F (round flange) versions: DN32-50. NKV1-NKV20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

DAB, Company Information,model name, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

NKV 1, NKV 3, NKV 6, NKV 10, NKV 15 & NKV 20 PUMP RANGES Code example (EV range): NKV 32 / 13 - 2 X Where: NKV = Pump model 20 = Nominal flow rate [m³/h] 13 = No. of stages/impellers 2 = Number and type of turned impeller X = Materials " " = Cast Iron/AISI 304; X = AISI 316

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Range of vertical multistage booster pumps, with stainless steel bodies and impellors. Maximum working pressure is either 16.0 or 25.0 bar depending on specific model. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2205046

Size:

Please refer to model.

Marking:

EBARA, CE, model, temperature and other technical information on data plate.

Installation Requirements:

R001 R415

Expiry date:

31/05/2027

Model:

EVMS(.) 1 >> Size from 2 to 39 stages EVMS(.) 3 >> Size from 2 to 33 stages EVMS(.) 5 >> Size from 2 to 27 stages EVMS(.) 10 >> Size from 2 to 23 stages EVMS(.) 15 >> Size from 1 to 17 stages EVMS(.) 20 >> Size from 1 to 16 stages EVMS(.) 32 >> Size from 1 to 14 stages EVMS(.) 45 >> Size from 1 to 13 stages EVMS(.) 64 >> Size from 1 to 8 stages EVMS(.) 90 >> Size from 1 to 6 stages ( ) = EVMS >> AISI304 Components (L) = EVMSL >> AISI316L Components (K*) = EVMSK >> AISI304 + PRESSURE SENSOR (LK*) = EVMSLK >> AISI316L + PRESSURE SENSOR *K1 = DANFOSS MBS1900 *K2 = DANFOSS DST P 140 *K3 =SCHNEIDER XMLP0xxBD21F EVMS(.) 1-3 >> Available with Oval flange G1, Round Flange DN25, Loose round flange DN25, Victaulic DN32 and Clamp Ø59 EVMS(.) 5 >> Available with Oval flange G1¼, Round Flange DN32, Loose round flange DN32, Victaulic DN32 and Clamp Ø59. EVMS(.) 10 >> Available with Oval flange G1½, Round Flange DN40, Loose round flange DN40, Victaulic DN50 and Clamp Ø87. EVMS(.) 15-20 >> Available with Oval flange G2, Round Flange DN50, Loose round flange DN50, Victaulic DN50 and Clamp Ø87. EVMS(.) 32 >> Available with Loose round flange DN65. EVMS(.) 45 >> Available with Loose round flange DN80. EVMS(.) 64-90 >> Available with Loose round flange DN100.

Product Images

Approval Holder:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Manufacturer:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company