Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240504020

Range of angled valves with brass bodies (some models chrome plated). Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:: 2310 Valves
Section Subtitle:: Stop, metal, screw down.
WRAS Approval Number:: 240504020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see models
Marking:: Schell moulded on to Valve Body
Installation Requirements:: R001
Expiry date:: 31/05/2029
Model:: 05 112 - ½” BSP (M) x ⅜” BSP (M) 05 252 - ½” BSP (M) x 10mm compression 05 377 - ½” BSP (M) x ½” BSP (M) 05 257 - ½” BSP (M) x ⅜” BSP (M) 05 396 - ½” BSP (M) x ½” BSP (M) 05 398 - ½” BSP (M) x ½” BSP (M) 05 399 - ½” BSP (M) x ½” BSP (M) 05 414 - ½” BSP (M) x ⅜” BSP (M) 05 415 - ½” BSP (M) x ⅜” BSP (M) 05 419 - ½” BSP (M) x ½” BSP (M) Models added January 2025: 05 212 - ½” BSP (M) x ⅜” BSP (M) 05 217 - ½” BSP (M) x ½” BSP (M) 05 430 - ½” BSP (M) x ⅜” BSP (M) with filter

Approval Holder:: Schell GmbH & Co KG Armaturentechnologie

Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company
Manufacturer:: Schell GmbH & Co KG Armaturentechnologie

Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company

WRAS Approval Number: #240902701

Range of ultraviolet disinfection units with stainless-steel bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M) to 3” BSP (M). DN100 to DN300 flanged.
Marking:: VAN REMMEN, model and other technical information on label on body
Installation Requirements:: R001 R150 R170
Expiry date:: 30/09/2029
Model:: V90, V100, V110, V120, V130, V140, V150, V160, V170, V180 & V190 - ½” BSP (M) to 3” BSP (M). V200, V220, V250 & V290 - DN100 to DN300 flanged.

Approval Holder:: Van Remmen UV Techniek B.V.

Company Name
Van Remmen UV Techniek B.V.
Address
Hooglandweg 3, 8131 TE, Wijhe
Country
The Netherlands

View All Listings by this Company
Manufacturer:: Wycombe Water Ltd.

Company Name
Wycombe Water Ltd.
Address
6 Premus Coldharbour Way, Aylesbury HP19 8AP Aylesbury Bucks
Postcode
HP19 8AP
Country
United Kingdom
Phone
01480355446

View All Listings by this Company

WRAS Approval Number: #240655002

‘Endoprene® 85-20’. Factory applied, two component, beige coloured, solvent free polyurethane coating. Mix and apply as per Technical Data Sheet dated '09/09/2019'. Cure for 8 days@20°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 240655002
Expiry date:: 30/06/2029

Approval Holder:: BS Coatings

Company Name
BS Coatings
Address
Allee Paul Sabatier, BP 88, 27940 Aubevoye
Country
France
Phone
+ 33 32773077

View All Listings by this Company

WRAS Approval Number: #240755033

'61300 EPOXY TB BT BLEU 5005'. Factory applied, blue coloured epoxy powder coating. Spray apply as per manufacturers TDS dated '15/2/2019'. Cure for 20 minutes@160°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 240755033
Expiry date:: 31/07/2029

Approval Holder:: Inver Spa

Company Name
Inver Spa
Address
Vai Di Corticella 205, 40128 Bologna
Country
Italy
Phone
+39 051.6380.411 Fax: +39 051 6606888

View All Listings by this Company

WRAS Approval Number: #240855041

'PRIMGREEN® ENDURANCE & Primgreen LAT 12035' primers for use with 'RILSAN® PA11 T BLUE 7444 MAC (16293), PA11 T GREY 5161 MAC (17203), PA11 T WHITE 1488 AC (17219) & PA11 T BLACK 7450 AC (17185)' coatings. Factory applied primers and powder coatings. The piece to be coated is to be pre-heated to 330°C for 10 minutes, the primer and coating applied in accordance with user instructions 'Dircom - 4418E/05.2015/20' and then cured for 10 minutes@330°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 240855041
Expiry date:: 31/08/2029

Approval Holder:: Arkema France

Company Name
Arkema France
Address
CERDATO, Route du Launay, 27470 Serquigny
Country
France

View All Listings by this Company