'KUBOTAPOWDER TK1413F M'. Factory applied, grey coloured epoxy resin powder coating. Apply as per manufacturer's Technical Information 'No. SG23180' dated '11 June 2021'. Cure for 10 minutes@200°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2303534

Expiry date:

31/03/2028

Approval Holder:

KUBOTA Corporation

Company Name

KUBOTA Corporation

Address

1-3, Kyobashi 2-chome, Chuo-ku Tokyo, 104-8307

Country

Japan

Phone

+81-90-2492-1627

View All Listings by this Company

‘KUBOTA SEAL AC’. Factory applied, colourless acrylic resin coating. Apply as per manufacturer’s instructions ‘ref. no. 65700H-2.3’ dated 'Mar. 14.2017'. Cure for 7 days@27°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2304530

Expiry date:

30/04/2028

Approval Holder:

KUBOTA Corporation

Company Name

KUBOTA Corporation

Address

1-3, Kyobashi 2-chome, Chuo-ku Tokyo, 104-8307

Country

Japan

Phone

+81-90-2492-1627

View All Listings by this Company

'Maxline 100 Potable Water Coating Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDSMLI100.rv5.04042023'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205574

Expiry date:

31/05/2027

Approval Holder:

Maxkote Ltd.

Company Name

Maxkote Ltd.

Address

Clifton Moor, York

Postcode

YO30 4XL

Phone

+44 1904 809 773

General Email

info@maxkote.co.uk

View All Listings by this Company

'Vinoleo 77/14'. Amber coloured, soap based lubricant. Apply as per manufacturer's instructions. For use with water up to 23°C.

Section:

5160 Lubricants

Expiry date:

31/07/2028

Approval Holder:

MacDermid Ltd.

Company Name

MacDermid Ltd.

Address

BSA Business Park, 198 Golden Hillock Road, Small Heath, Birmingham

Postcode

B11 2RQ

Phone

0121 606 8100

View All Listings by this Company

'PPELXS314G20NA'. Beige coloured, injection moulded PPE material. For use with water up to 85°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2302531

Expiry date:

29/02/2028

Approval Holder:

Nantong Xingchen Synthetic Material Co., Ltd.

Company Name

Nantong Xingchen Synthetic Material Co., Ltd.

Address

118, Jianggang Rd, Nantong Economic Development Zone， Nantong, Jiangsu

Country

China

View All Listings by this Company