Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2306523

'5613 Gaskets'. Black coloured, compression moulded EPDM gaskets. Shore hardness 60. Tested in-radius size 3.0mm. For use with water up to 23°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 2306523
Expiry date:: 30/06/2028

Approval Holder:: Gulf Rubber Group - Tumedei SpA

Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2306528

'TIMO 4-80 ‘O’ rings and washers'. Black coloured, injection moulded EPDM ‘O’ rings and washers. Shore hardness 80. The ‘O’ rings have an in-radius size of between 0.52mm & 2.67mm. The washers have an in-radius size of between 0.52mm & 2.71mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 2306528
Expiry date:: 30/06/2028

Approval Holder:: Tecnogomma International SpA

Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

WRAS Approval Number: #2210560

'SE-618PF'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2210560
Expiry date:: 31/10/2027

Approval Holder:: Hun-Yi Rubber Industrial Co., Ltd.

Company Name
Hun-Yi Rubber Industrial Co., Ltd.
Address
No. 40, Lane 193, Hochen Road, Homei Town, Changhua County
Country
Taiwan,
Phone
+(886)47551315
General Email
hunyirubber@yahoo.com.tw

View All Listings by this Company

WRAS Approval Number: #2302564

Initial approval was for ‘REK-8000-Premium’ (shore hardness 80) only. In April 2024 ‘REK-5000-Premium’ (shore hardness 50) & ‘REK-7000-Premium’ (shore hardness 70) were added to the approval. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2302564
Expiry date:: 29/02/2028

Approval Holder:: Rekor Kaucuk Sanayi ve Ticaret A.S.

Company Name
Rekor Kaucuk Sanayi ve Ticaret A.S.
Address
REKOR KAUÇUK, OSB 21. Cadde No: 20 Odunpazarı, Eskişehir
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #2012574

'E7015WRC'. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2012574
Expiry date:: 31/12/2025

Approval Holder:: Satori Seal Corporation

Company Name
Satori Seal Corporation
Address
8455 Utica Avenue, Rancho Cucamonga, CA 91730-3809
Country
USA

View All Listings by this Company