'EP70B002'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.
'01/B80NBR 'O' rings' and gaskets. Black coloured, injection moulded NBR 'O' rings and gaskets. Shore hardness 80. Tested in-radii sizes between 0.5mm & 2.0mm. For use with water up to 23°C.
'LSR2650, LSR2660 & LSR2670'. Black coloured, injection moulded liquid silicone rubber materials. Shore hardness between 50 & 70. 'LSR 2660 White'. White coloured, injection moulded liquid silicone rubber material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 65°C.
'KEG-2003H-30, KEG-2003H-40, KEG-2003H-50, KEG-2003H-60 & KEG-2003H-70 (no postcure)'. Translucent, compression moulded, silicone rubber materials. Shore hardness between 30 & 70. Tested in-radii sizes between 0.18mm & 5.9mm. For use with water up to 85°C.
'PSX 34 Epoxy adhesive'. Site applied, two-part Epoxy adhesive/sealant comprising of a black coloured paste and grey coloured paste, supplied as a pre-weighed kit. Mix, apply and cure as per manufacturer’s TDS ‘ADH4710ENG_PotableWater Feb 2026’. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PSX 60 Epoxy adhesive'. Site applied, two-part Epoxy adhesive/sealant comprising of a black coloured paste and grey-white coloured paste, supplied as a pre-weighed kit. Mix, apply and cure (refer to Minimum Joint Cure Time) as per manufacturer’s TDS ‘ADH4720ENG_PotableWater Feb 2026’. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On 747 PVC Cement'. Blue coloured solvent cement. Apply as per manufacturer's PDS '747-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On 795 Clear PVC Cement'. Clear solvent cement. Apply as per manufacturer's PDS '795-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass body), flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator, and the inlet hoses are supplied with stainless steel strainers. The inlet hose has and an approved check valve cartridge: however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, with bottom entry. The inlet incorporates a plastic strainer. Maximum working pressure 10.0 Bar Cold Water Use Only
Page 1135 of 1181
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
