Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309384

Size:

See model.

Marking:

Lawton tubes logo, EN1254 and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

SB-EFCOMI0151/2 CORE 15mm X 1/2" Male Adaptor Brass N3015 SB-EFCOMI0153/4 CORE 15mm X 3/4" Male Adaptor Brass SB-EFCOMI0223/4 CORE 22mm X 3/4" Male Adaptor Brass N3022 SB-EFCOMI0281 CORE 28mm X 1" Male Adaptor Brass N3028 SB-EFCOMI03511/4 CORE 35mm X 1.1/4" Male Adaptor Brass SB-EFCOMI04211/2 CORE 42mm X 1.1/2" Male Adaptor Brass SB-EFCOMI0542 CORE 54mm X 2" Male Adaptor Brass SB-EFCP015 CORE 15mm Coupler EF N1015 SB-EFCP022 CORE 22mm Coupler EF N1022 SB-EFCP028 CORE 28mm Coupler EF N1028 SB-EFCP035 CORE 35mm Coupler EF SB-EFCP042 CORE 42mm Coupler EF SB-EFCP054 CORE 54mm Coupler EF SB-EFCP06 CORE 66.7mm Coupler EF SB-EFCP076 CORE 76.1mm Coupler EF SB-EFCP108 CORE 108mm Coupler EF SB-EFEC015 CORE 15mm End Cap EF N61015 SB-EFEL015 CORE 15mm 90° Elbow EF N12015 SB-EFEL022 CORE 22mm 90° Elbow EF N12022 SB-EFEL028 CORE 28mm 90° Elbow EF N12028 SB-EFEL035 CORE 35mm 90° Elbow EF N12035 SB-EFEL042 CORE 42mm 90° Elbow EF SB-EFEL054 CORE 54mm 90° Elbow EF SB-EFEL067 CORE 66.7mm 90° Elbow EF SB-EFEL076 CORE 76.1mm 90° Elbow EF SB-EFEL108 CORE 108mm 90° Elbow EF SB-EFELS015 CORE 15mm 90° Street Elbow EF N12S015 SB-EFELS022 CORE 22mm 90° Street Elbow EF N12S022 SB-EFRED02215 CORE 22mm X 15mm Fitting Reducer EF N6022015 SB-EFRED02822 CORE 28mm X 22mm Fitting Reducer EF N6028022 SB-EFTE015 CORE 15mm Equal Tee EF N24015 SB-EFTE022 CORE 22mm Equal Tee EF N24022 SB-EFTE028 CORE 28mm Equal Tee EF SB-EFTE035 CORE 35mm Equal Tee EF SB-EFTE042 CORE 42mm Equal Tee EF SB-EFTE054 CORE 54mm Equal Tee EF SB-EFTE067 CORE 66.7mm Equal Tee EF SB-EFTE076 CORE 76.1mm Equal Tee EF SB-EFTE108 CORE 108mm Equal Tee EF SB-EFTE0221522 CORE 22mm X 15mm X 22mm Reducer Tee EF N26022015022 SB-EFTE0222215 CORE 22mm X 22mm X 15mm Reducer Tee EF N25022015

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

Phone

0116 222 7330

General Email

kel.phillips@sbs.co.uk

View All Listings by this Company

Manufacturer:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Coventry

Postcode

CV4 9AB

Country

United Kingdom

Phone

+44 24 7646 6203 or 024 7646 6203

General Email

mlis@lawtontubes.co.uk

View All Listings by this Company

‘EPH_WSP19_XXXX’ range of brass end feed and threaded fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250515011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Size and/or DOZ on body.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

End Feed Fittings: Air vent cap: EPH_WSP19_0593 - 15mm. Wall Plate Elbow: EPH_WSP19_0608 - 15mm * ½” BSP (M). Male Coupler: EPH_WSP19_0618 - 15mm * ½” BSP (M), EPH_WSP19_0619 - 15mm * ¾” BSP (M), EPH_WSP19_0625 - 22mm * ¾” BSP (M). Female Coupler: EPH_WSP19_0635 - 15mm * ½” BSP (F), EPH_WSP19_0642 - 22mm * ¾” BSP (F). Female Elbow: EPH_WSP19_0663 - 15mm * ½” BSP (F). Male Elbow: EPH_WSP19_0676 - 15mm * ½” BSP (M). Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F), EPH_WSP19_0720 - ⅜” BSP (F), EPH_WSP19_0721 - ½” BSP (F) - CHROME, EPH_WSP19_0721A - ½” BSP (F), EPH_WSP19_0722A - ¾” BSP (F), EPH_WSP19_0723 - 1" BSP (F). Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (M), EPH_WSP19_0727 - ¾” BSP (M), EPH_WSP19_0724 - ¼” BSP (M), EPH_WSP19_0728 - 1" BSP (M). Threaded Brass Reducing Bush: EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F), EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F), EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F), EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F), EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F). Threaded Brass Hexagon Nipple: EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M), EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M), EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M), EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M), EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M). Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F), EPH_WSP19_0802A - ¾” BSP (F). Threaded Brass Female Socket: EPH_WSP19_0841 - ¼” BSP (F), EPH_WSP19_0843 - ½” BSP (F), EPH_WSP19_0844 - ¾” BSP (F), EPH_WSP19_0845 - 1” BSP (F). Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M), EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M). Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer.

Approval Holder:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Manufacturer:

Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name

Jiangxi Avonflow Hvac Tech Co., Ltd

Address

No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province

Country

China

View All Listings by this Company

Range of pumps, with stainless steel bodies, impellers and shaft. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250904702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Wilo, made in Korea, Model No., Serial No., website address, & other tech info on data label. Wilo printed on control panel.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Model:

PBI-L203EA - Suction 25A(1”) Discharge 25A(1”) PBI-L204EA - Suction 25A(1”) Discharge 25A(1”) PBI-L205EA - Suction 25A(1”) Discharge 25A(1”) PBI-L402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-L803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD203EA - Suction 25A(1”) Discharge 25A(1”) PBI-LD402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) 1 - Series PBI-L: Electronic Boosting Pump Variable Speed Pump(Inverter Pump). 2 - Number of Pumps None/blank : Single Type (One Pump), D: Duplex Type (Two Pumps). 3 - Rated Flow capacity 2 : 2㎥/hr, 4 : 4㎥/hr, 8 : 8㎥/hr. 4 - Number of Impellers 02 : 2 Impellers, 03 : 3 Impellers, 04 : 4 Impellers, 05 : 5 Impellers. 5 - Power 60Hz L: 110V ~, J: 120V ~ , 127V~, M: 220V~ D: 110V/220V~, I: 220/380V 3~, T: 220V 3~, U: 380V 3~, N: 440V 3~, R: 480V 3~. 50Hz Z: 110V ~, C: 120V ~, 127V~, E: 220V ~, F: 110V/220V ~, G: 220/380V 3~, H: 220V 3~, Q: 380V 3~, Y: 440V 3~. 6 - Automatic mode. None/blank : non automatic models A: models which equips themselves with components that are responsible for automatic mode.

Approval Holder:

WILO Pumps Ltd.

Company Name

WILO Pumps Ltd.

Address

46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company

Range of shower handsets and overhead showers with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250312003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet only

Marking:

Jelong, WRAS on handset body or connection.

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Proviso:

Open outlet only

Model:

A12231* 3F hand shower A12232* 3F hand shower A12131* 3F hand shower A18311* 1F hand shower A12011* 1F hand shower A14431* 3F hand shower A14441* 4F hand shower A15241* 4F hand shower A15331* 3F hand shower B27811* 1F shower head B27012* 1F shower head B26111* 1F shower head B23111* 1F shower head B23011* 1F shower head B23251* 5F shower head For Hand shower * denotes: CH=CHROME PLATED BN=BRUSH NICKEL, GM=GUN METAL, G=GOLD, RG=ROSE GOLD For Shower head * denotes: CH=CHROME PLATED MB=MATT BLACK, W= WHITE, BN=BRUSH NICKEL, ORB=OIL RUBBED BRONZE， GM=GUN METAL, G=GOLD, RG=ROSE GOLD

Approval Holder:

Xiamen Jelong Plumbing Co.,Ltd

Company Name

Xiamen Jelong Plumbing Co.,Ltd

Address

Unit 402, No. 598 Guankou South Road Jimei District Xiamen

Country

China

View All Listings by this Company

Manufacturer:

Xiamen Jelong Plumbing Co.,Ltd

Company Name

Xiamen Jelong Plumbing Co.,Ltd

Address

Unit 402, No. 598 Guankou South Road Jimei District Xiamen

Country

China

View All Listings by this Company

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck mounted Capable of achieving AUK2 Tap gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005

Expiry date:

31/01/2031

Notes & Further Information

X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: F – Cross Top Type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD