'Raymond Microsilica Modified Cement Mortar Standard A'. Site applied, grey coloured cement mortar. Mix cement/sand in a 1:1.1 mass ratio. To this add micro silica at 7%, achieved by mixing cement mix/micro silica in a mass ratio of 1:0.07 and water at 1:0.32 (cement mix/water). Add the MasterPozzolith 55R at a ratio of 2.2ml per kilo of cement. Apply as per manufacturer’s TDS ‘TDS/RI/2024/MMCM “Standard A’, dated ‘ 21 Feb 2024’. Cure for 28 days at a temperature of between 10°C and 35°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240255021

Expiry date:

28/02/2029

Approval Holder:

Raymond International W.L.L.

Company Name

Raymond International W.L.L.

Address

PO Box 5063, Manama

Country

Bahrain

View All Listings by this Company

'ES 988 DWPU'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDS507DWPU.rv2.17102018'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205579

Expiry date:

31/05/2027

Approval Holder:

Echo Square Services Ltd.

Company Name

Echo Square Services Ltd.

Address

Echo Square, Office Suite 2, Fort Bridgewood, Rochester

Postcode

ME1 3DQ

View All Listings by this Company

'Badadur PBT9 GF10/GK20 graphit 371'. Dark grey coloured, injection moulded PBT material. For use with water up to 65°C.

Section:

5205 Polybutylene Terephthalate

Expiry date:

28/02/2029

Approval Holder:

Bada AG

Company Name

Bada AG

Address

Untere Strut 1, D-77815 Bühl/Baden

Country

Germany

General Email

waldecker@bada.de

View All Listings by this Company

'Saudi Drip HDPE PE100 pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

240155038

Expiry date:

31/01/2029

Approval Holder:

Saudi Drip Irrigation Co. Ltd.

Company Name

Saudi Drip Irrigation Co. Ltd.

Address

Building No. 3076, Road 318, Industrial City 2, Post Code: 14335, Riyadh

Country

Saudi Arabia

View All Listings by this Company

'Uponor PE 100 RC Pipe'. Black coloured (with blue external stripe), extruded PE pipe. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

240255024

Expiry date:

28/02/2029

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company