Range of electronically controlled ion exchange water softeners (salt regenerated) for commercial and domestic use. Maximum working pressure 5.0 bar. Cold water use.
'NextGen NP-F9500 PW'. Factory applied, blue coloured powder coating. Apply as per National Paints technical data sheet 'FBE/ REV01 09-07-2019'. Cure for 3 minutes@240°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Shalipoxy 400'. Factory applied, two-part beige coloured epoxy coating. Mix component A & B in a 3:1 volume ratio and apply as per manufacturer’s Application Methodology ‘R&D/AIN 004/2013’, dated ’01.05.2013’. Cure for 7 days@27°C. For use with water up to 23°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'ShaliPoxy 400 FG'. Factory applied, white coloured, two-component epoxy coating. Mix components A & B in a volume ratio of 3:1 and apply as per manufacturer’s TDS ‘0982019’. Cure for 7 days@27°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PROTEGOL UR Coating 32-45'. Factory applied, two-part, blue coloured, Polyurethane coating. Mix parts A and B in a 3:1 volume ratio and apply as per manufacturer's Application Instructions dated '06/2025'. Cure for 24 hours@23°C until a shore hardness of 70 D is reached. For use with water up to 65°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PROTEGOL UR Coating 32-69 MB'. Factory applied, two-part, blue coloured, Polyurethane coating. Mix parts A and B in a 1:1 volume ratio and apply as per manufacturer's Application Instructions '06/2025'. Cure for 24 hours@23°C until a shore hardness of 70 D is reached. For use with water up to 65°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'ConProtect WP 1'. Liquid concrete admixture based on crystallization technology. To be added at a maximum of 2% of the cement weight as per manufacturer's TDS 'Version 3 - 2025'. Cure for 14 days@23°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Acoflon 215'. Black coloured, compression moulded PTFE + Carbon ring. For use with water up to 23°C.
'PVDF Solef® 1008/0UP1'. White/off-white coloured (translucent), injection moulded PVDF material. For use with water up to 85°C.
'Foodgum/55/N'. Black coloured, compression moulded butyl rubber material. Shore hardness 55. Tested in-radius size 1.0mm. For use with water up to 23°C.
Page 1035 of 1045
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
