Directory Search Results

Print List

#240204050

Range of wall & floor mounted, two hole, single outlet combination tap assemblies with brass bodies incorporating ceramic cartridge headworks with single lever operating members. Spout incorporates a plastic aerator. Products also incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (M).
Marking:
Gessi on handle.
Installation Requirements:
R001 R010 R030
Expiry date:
28/02/2029
Model:
65113 (wall mounted), 65128 (floor mounted) + 65099 (floor mounting plate / roughing set).

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#240208005

Range of EEICo brass threaded fittings. Maximum working pressure 20.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Size:
See models.
Marking:
EEICo, size and made in KSA on body and EEICo on the nut.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
Elbow 90⁰ ½” – 1” BSP F x F FXM Elbow ½” – 1 ¼” BSP M x F Valve tail and tail nut ½” – 1 ¼” BSP M x F Straight connector ½” – 1 ¼” BSP M x M

Approval Holder:
Elite Experts Industry Company (EEICo).
Company Name
Elite Experts Industry Company (EEICo).
Address

View All Listings by this Company
Manufacturer:
Elite Experts Industry Company (EEICo).
Company Name
Elite Experts Industry Company (EEICo).
Address

View All Listings by this Company

Print This Approval


#240202720

Range of self-acting controllers with brass bodies, EPDM O rings and gaskets. Maximum working pressure 16.0 Bar Maximum operating temperature of the secondary circuit is 65˚C and the primary circuit is 99˚C

Section:
1530 Miscellaneous Fittings
Size:
Primary ¾” BSP captive nut inlet and ¾” BSP (M) outlet, Secondary ¾” BSP (M) inlet and ¾” BSP captive nut outlet.
Marking:
Danfoss label on body, model number, production date (WW/YY), pressure rating on body.
Expiry date:
31/03/2029
Model:
PTC2+p IHPT PM2+p.

Approval Holder:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company
Manufacturer:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company

Print This Approval


#240202721

Range of flow-compensated (thermostatic) temperature controllers incorporating a brass body with EPDM ‘O’-rings and gaskets. The valves incorporate a non-rising spindle headwork for temperature regulation. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C

Section:
1530 Miscellaneous Fittings
Size:
¾" BSP captive nut inlets x ¾” BSP (M) outlets
Marking:
Danfoss logo, PN, sales number and date of manufacture WWYY on body.
Installation Requirements:
R001
Expiry date:
31/03/2029
Model:
IHPT 2.0 003L3651 (Thermostatic controller IH90 size DN15), IHPT 2.0 003L3653 (Thermostatic controller IH180 size DN15).

Approval Holder:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company
Manufacturer:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company

Print This Approval


#240507701

`UPM3` range of single stage circulator pumps, with stainless steel or plastic bodies, plastic impellers, ceramic shafts and bearings, EPDM 'O'-rings and seals. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240507701
Size:
Stainless steel body models (N): 1" BSP (M) (retrospectively added June 2024), 1½” BSP (M) & 2” BSP (M). Composite (plastic) body models (CIL3): 1” BSP (M).
Marking:
Grundfos logo, Grundfos and model on top of pump housing. Production number, serial number, and technical information on side of pump housing. Stainless steel models also have a flow arrow on the body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
UPM3 **1-**2 N ***3 (GFNxx-). UPM3 **1-**2 - CIL3 ***3 (GFNxx-). Model added November 2024: ALPHA SOLAR 25-**2 N 180. Where: UPM3 & ALPHA SOLAR = pump type. For UPM3 these can also be: UPM3 HYBRID, UMP3 DHW, UPM3 K, UPM3 AUTO L UPM3 FLEX AS. **1 = size of inlet/outlet connection: N models – 25 = 1 ½”, 32 = 2”. CIL3 models – 15 = 1”. **2 = maximum head (dm): 20, 40, 50, 60, 70, 75 (all models). 105, 145 (stainless steel body models only). N = stainless steel body. CIL3 = composite (plastic) body. ***3 = port to port length in mm: 130 (all models) or 180 (ALPHA SOLAR 1½” model and 2” N models only).
Product Images

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1034 of 1706

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.