'EP011470P(KAWN)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.
'51M7568'. Black coloured, injection moulded EPDM material. Shore hardness 75 ShA. Tested in-radius size 1.0mm. For use with water up to 23°C.
'AA7BCZ'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.
Five-hole, single outlet (fixed) combination tap assembly with brass bodies (various finishes), incorporating a quarter turn ceramic disc headworks to control the flow and a manual diverter to shower outlet both with single lever operating members. The spout outlet incorporates an aerator. The product is supplied with a pull out shower hose and shower handset, metal backnuts and stainless steel braided, EPDM lined interconnecting hoses. The handset also incorporates an approved single check valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Spring loaded resilient trim check valve cartridge with plastic body and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of spring loaded single check valve cartridges comprising of a POM body and cap, stainless steel spring and EPDM gasket and O-rings. Max working pressure 10 bar. Max operating temperature 85°C.
Range of In-line plastic flow regulators housed within a brass bodies incorporating a plastic strainer and EPDM ‘O’-rings. Maximum working pressure 10.0 Bar Maximum operating temperature 65°C.
Range of ceramic cartridge headworks with plastic bodies and EPDM ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Push to open, push to close ‘detent’ headworks with plastic bodies and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of thermostatic cartridges with plastic bodies, stainless steel strainers and EPDM ‘O’-rings. Maximum operating temperature 85°C. Open outlet use only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 235038 X XXX | VARIOUS | 1/2" BSP | 10.0 bar | 65 °C | PPI | ON REAR OF BODY | No | Ceramic cartridge | C-plate | Aerator & Flow Straightener | Click Type | |
| 223238 X XXX | VARIOUS | 1/2" BSP | 10.0 bar | 65 °C | PPI | ON REAR OF BODY | No | Ceramic cartridge | C-plate | Aerator & Flow Straightener | Click Type |
X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles : A (Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 193746 X XXX | VARIOUS | 1/2" BSP | 5.0 bar | 85 °C | PPI | REAR OF BODY | No | Ceramic cartridge | C-plate | Flow Straightener |
X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AL ES BAS C | Chrome | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | Ceramic cartridge | C-plate | Aerator | Click Type | Flow Regulator Fitted, |
| AL ES BAS BB | Brushed Brass | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | Ceramic cartridge | C-plate | Aerator | Click Type | Flow Regulator Fitted, |
| AL ES BAS BLK | Black | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | Ceramic cartridge | C-plate | Aerator | Click Type | Flow Regulator Fitted, |
| AL ES TBAS C | Chrome | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | Ceramic cartridge | C-plate | Aerator | Click Type | Flow Regulator Fitted, |
| AL ES TBAS BLK | Black | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | Ceramic cartridge | C-plate | Aerator | Click Type | Flow Regulator Fitted, |
| AL ES TBAS BB | Brushed Brass | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | Ceramic cartridge | C-plate | Aerator | Click Type | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CRU TBAS C | Chrome | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Click Type | Flow Regulator Fitted, |
| CRU TBAS BLK | Black | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Click Type | Flow Regulator Fitted, |
| CRU TBAS BB | Brushed Brass | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Click Type | Flow Regulator Fitted, |
| 313935 | Chrome | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Click Type | Flow Regulator Fitted, |
| 313936 | Black | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Click Type | Flow Regulator Fitted, |
| 313937 | Brushed Brass | 1/2" BSP | 5 bar | 65 °C | Bristan | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Click Type | Flow Regulator Fitted, |
Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass) bodies, incorporating non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Product supplied with a surface mounting kit comprising of Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections with 15x15mm compression isolation valves that incorporate single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VAC DFBAS C MT | Chrome | G 1/2 | 5.0 bar | 60 °C | Bristan | Handle | No | Non-rising spindle | C-plate | Open Outlet | Pop Up |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HD15 | Chrome | BSP 3/4" (M) | 10 bar | 60 °C | Brand logo | Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Interconnecting Hoses, |
| HD15K | Matte Black | BSP 3/4" (M) | 10 bar | 60 °C | Brand logo | Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Interconnecting Hoses, |
| HD15BB PVD | Zirconium gold brushed topcoat | BSP 3/4" (M) | 10 bar | 60 °C | Brand logo | Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Interconnecting Hoses, |
| HD15BV | Brushed gold matte topcoat | BSP 3/4" (M) | 10 bar | 60 °C | Brand logo | Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Interconnecting Hoses, |
| HD15MG | Gun gray brushed | BSP 3/4" (M) | 10 bar | 60 °C | Brand logo | Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Interconnecting Hoses, |
| HD15CA | Rose gold brushed | BSP 3/4" (M) | 10 bar | 60 °C | Brand logo | Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Interconnecting Hoses, |
| HD15BN | Nickel brushed | BSP 3/4" (M) | 10 bar | 60 °C | Brand logo | Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Interconnecting Hoses, |
These models only different in surface treatment
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AL 3TH BAS C | Chrome | G 1/2" Male | 5 bar | 65 °C | Bristan | Handle | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
| AL 3TH BAS BLK | Black | G 1/2" Male | 5 bar | 65 °C | Bristan | Handle | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
| AL 3TH BAS BB | Brushed Brass | G 1/2" Male | 5 bar | 65 °C | Bristan | Handle | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
| CRU 3TH BAS C | Chrome | G 1/2" Male | 5 bar | 65 °C | Bristan | Handle | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
| CRU 3TH BAS BLK | Black | G 1/2" Male | 5 bar | 65 °C | Bristan | Handle | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
| CRU 3TH BAS BB | Brushed Brass | G 1/2" Male | 5 bar | 65 °C | Bristan | Handle | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
| 313941 | Chrome | G 1/2" Male | 5 bar | 65 °C | Bristan | Handle | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
| 313942 | Black | G 1/2" Male | 5 bar | 65 °C | Bristan | Handle | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
| 313943 | Brushed Brass | G 1/2" Male | 5 bar | 65 °C | Bristan | Handle | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
Range of chemical dosing equipment which incorporate self-closing valves within a plastic body with EPDM o-rings. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. Maximum working pressure 9.0 bar. Maximum operating temperature 70ºC.
Expansion vessel with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Page 103 of 115
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
