'Hydroplate 1914'. Site applied, two-component, white coloured (once mixed and applied) Epoxy-polyamine coating. Mix parts A & B in a 3:1 weight ratio and apply as per manufacturer's Product Data Sheet 'B034', dated 'September 2024'. Cure coat 1 for 48 hours at 15°C. Cure coat 2 for 21 days at 15°C. For use with water up to 50°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240855045

Expiry date:

31/08/2029

Approval Holder:

Carboline Norge AS

Company Name

Carboline Norge AS

Address

Husebysletta 9, 3414, Lierstranda

Country

Norway

View All Listings by this Company

'BELPA CSA 50'. Light green coloured, NBR/fibre gasket material manufactured by calendaring. Shore hardness 65. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

240955032

Expiry date:

30/09/2029

Approval Holder:

Montero FYE S.A.

Company Name

Montero FYE S.A.

Address

Retuerto 15, 48903 Baracaldo

Country

Spain

Phone

+34 94 418 0011

General Email

raul@monterofye.com

View All Listings by this Company

'GRE -FPI-KSA-WAVISTRONG1'. Green-brown coloured GRE pipe manufactured by helical winding. For use with water up to 85°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

240955054

Expiry date:

30/09/2029

'Grilon TSG-30/4 FA Black 9840'. Black coloured, injection moulded PA material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240955033

Expiry date:

30/09/2029

Approval Holder:

EMS-CHEMIE AG

Company Name

EMS-CHEMIE AG

Address

Via Innovativa 1, CH-7013 Domat/Ems

Country

Switzerland

Phone

+41 81 632 78 78

General Email

welcome@emsgrivory.com

View All Listings by this Company

'Genestar G1350A-M47WF Black'. Black coloured, polyamide 9T material for injection moulding and extrusion purposes. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240955040

Expiry date:

30/09/2029

Approval Holder:

Kuraray Co.,Ltd.

Company Name

Kuraray Co.,Ltd.

Address

Tokiwabashi Tower, 2-6-4, Otemachi, Chiyoda-ku, Tokyo, 100-0004

Country

Japan

View All Listings by this Company