Combination Tap Assemblies

Section Code 0470 : Single hole tap(s) with a single outlet and a swivel spout.

Back To Directory Sections

#250913003

Single hole, single outlet (swivel) combination tap assembly with brass body (chromium plated), incorporating a ceramic cartridge headworks and single lever operating member. The outlet incorporates a plastic aerator. One inlet hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250913003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
Abode on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2030
Model:
LOGIK single lever
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

Print This Approval


#251002011

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and the spout outlet incorporates a plastic aerator. Maximum working pressure; 10 Bar Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
251002011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless Steel braided, PEX lined flexible hose assemblies with 3/8" BSP captive nuts
Marking:
Hansgrohe on front of body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2030
Model:
71 802 xx0 71 802 800 71 812 xx0 71 812 800 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#251004017

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
251004017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression end connections.
Marking:
CAL on rear operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2030
Model:
ACT2092
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

Print This Approval


#250913004

Single hole, single outlet (swivel) combination tap assembly with brass body (chromium plated), incorporating a ceramic cartridge headworks and single lever operating member. The outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250913004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
SMR on rear of tap.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2030
Model:
ZENO & ZENO PLUS
Product Images

Approval Holder:
Franke UK Ltd.
Company Name
Franke UK Ltd.
Address
West Park, MIOC, Styal Road, Manchester
Postcode
M22 5WB
Country
United Kingdom
Phone
0161 4360280

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval


#250913005

Single hole, single outlet (swivel) combination tap assembly with brass body (chromium plated), incorporating a ceramic cartridge headworks and single lever operating member. The outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250913005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
'Leisure' logo on operating member & SMR on rear of tap.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2030
Model:
AQUAPACE 35 SINGLE LEVER, AQUAPACE 35 SINGLE LEVER 3L, AQUAPACE 35 SINGLE LEVER 5L & AQUAPACE 35 SINGLE LEVER 6L
Product Images

Approval Holder:
AGA Rangemaster Leisure Limited
Company Name
AGA Rangemaster Leisure Limited
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 102 of 102

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.