‘UPM4’ range of circulator pumps with either a composite (plastic) or stainless-steel body, plastic impellor and EPDM ‘O’-rings. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C ((CIL3) plastic body models), 99°C (S/Steel body models).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211908

Note:

R008 does not apply to the stainless steel body models. R415 does not apply if used on a closed circuit.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and date of production (PC code = PC: YYWWxxx) on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2027

Model:

UPM4/UPM4L A BBB CC-DD E EEE F GGG Where: UPM4 - pump series type - standard, UPM4L - pump series type - large (motor) version with extended P1. UPM4XL (Added October 2024) - Extra-large version with extended performance. A = K - for condensing environments. BBB = Control variant - PWM or LIN bus. CC = Nominal diameter - 15 = G1”, 25 = G1½”, 32 = G2”. DD = Maximum head, value divided by 10 = head in m, e.g. 20 = 2.0m. Can be 20, 30, 40, 45, 50, 55, 60, 65, 70, 75 or 90. (90 variant added October 2024). E EEE = Pump housing and port length. N 130 and N 180 = Stainless steel and 130 or 180mm port length. CIL3PP = Composite (plastic), which is only available as 130mm port length, so no value Is mentioned. F = Control box orientation. Can be 3, 6, 9, or 12. GGG = Customer code. Can be any combination or letters and numbers.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘Homebooster’ pump with stainless steel body, plastic impeller and EPDM rubber ‘O’-rings. The product is supplied with two loose brass ¾” captive nut x ½” BSP (M) connectors and fibre gaskets for installation on the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301901

Size:

¾” BSP (M) inlet x outlet (to pump). ½” BSP (M) inlet x outlet (to optional brass connectors).

Marking:

Grundfos and Grundfos logo, type, Product no. and technical info on adhesive label on motor housing. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

UPA 15-90 N 160 Homebooster.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of shower handsets with plastic bodies. The inlets incorporate a stainless-steel strainer and a built-in flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2212066

Size:

½” BSP male inlet

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

28760210, 28787640, 28788570

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower heads with plastic bodies (various finishes), incorporating plastic strainer or flow restrictor and EPDM o rings with stainless-steel strainers on the inlets. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2212078

Size:

½” BSP (M)

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

26 810 400 Hansgrohe Croma Select E Hand shower Multi 26 811 400 Hansgrohe Croma Select E Hand shower Multi EcoSmart 9 l/min 26 812 400 Hansgrohe Croma Select E Hand shower Vario 26 813 400 Hansgrohe Croma Select E Hand shower Vario EcoSmart 9 l/min 26 814 400 Hansgrohe Croma Select E Hand shower 1jet 26 815 400 Hansgrohe Croma Select E Hand shower 1jet EcoSmart 9 l/min 26 816 400 Hansgrohe Croma Select E Hand shower 1jet EcoSmart 7 l/min

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Crometta 85 range of chrome plated plastic shower outlets, incorporating EPDM washers and flow regulator and stainless-steel strainer at the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2212080

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Hansgrohe on face.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

28 423 xxx 28 424 xxx 28 425 xxx xxx denotes the surface finish. It will always be 3 digits, which can be: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company