Directory Search Results

Print List

#250902031

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure:8.0 Bar Maximum operating temperature:65 °C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
250902031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined hose incorporating 3/8" BSP (F) captive nut end connection
Marking:
Stern on top of tap body
Installation Requirements:
R001 R006 R009
Expiry date:
30/09/2030
Model:
212000 – Boreal B 212005 – Boreal E 212010 – Boreal Plus B 212015 – Boreal Plus E

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#251008003

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve, activated via an infra-red sensor. The product is supplied with a combined TPE washer and stainless-steel strainer to be installed on the inlet to the solenoid. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251008003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R008 applies to solenoid only.
Size:
½” BSP (M) on solenoid.
Marking:
INTA, date of manufacture (WW/YY) and model on body.
Installation Requirements:
R001 R006 R008
Expiry date:
31/10/2030
Model:
IR120CP.1 (battery operated). IR121CP.1 (Mains operated).

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#251008004

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve, activated via an infra-red sensor. The product is supplied with a combined TPE washer and stainless-steel strainer to be installed on the inlet to the solenoid. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251008004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R008 applies to solenoid only.
Size:
½” BSP (M) on solenoid.
Marking:
INTA, date of manufacture (WW/YY) and model on body.
Installation Requirements:
R001 R006 R008
Expiry date:
31/10/2030
Model:
D67514 - SARACEN Infra Red Tap Battery Operated D67513 - SARACEN Infra Red Tap Mains Operated

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#251008005

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve, activated via an infra-red sensor. The product is supplied with a combined TPE washer and stainless-steel strainer to be installed on the inlet to the solenoid. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251008005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R008 applies to solenoid only.
Size:
½” BSP (M) on solenoid.
Marking:
INTA, date of manufacture (WW/YY) and model on body.
Installation Requirements:
R001 R006 R008
Expiry date:
31/10/2030
Model:
SF2610CP (battery operated). SF2611CP(Mains operated).

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#250904710

Range of bottom and side entry BS1212-4 (2016) compact type float operated inlet valves, for WC flushing cisterns with plastic bodies and adjustable floats and a plastic flow regulator at the inlet. Maximum operating pressure: 10 bar. Maximum operating temperature: 23°C.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250904710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R560 only applied to model AG104 PLUS BOTTOM.
Size:
See models.
Marking:
OLI & BS1212-4 on body.
Installation Requirements:
R001 R550 R560
Expiry date:
30/09/2030
Model:
AG104 PLUS SIDE - ½” BSP (M), AG104 PLUS VERTICAL - 3/8” Captive Nut, AG104 PLUS BOTTOM - ½” BSP (M).

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2103045

Side entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2103045
Size:
½” BSP (M) 3/8” BSP (M) 15mm Spigot connection
Marking:
My Life on valve body. BS1212-4 and WRAS on float.
Installation Requirements:
R001 R280 R550
Expiry date:
31/03/2026
Model:
SPCSOSFV side Entry SPCSOSFV (lenghten) SPCSOSFV (bend) SPCSOSFV (Translucence) SPCSOSFV(Quick)

Approval Holder:
MyLife Bathrooms Limited
Company Name
MyLife Bathrooms Limited
Address
Greenbank Industrial Estate Rampart Road Newry Co. Down BT342QU Ireland

View All Listings by this Company

Print This Approval


#251001701

WC Cistern incorporating a side or bottom entry float operated inlet valve and a Syphon (Phantom S), Pneumatic Drop Valve (Phantom V) or Cable Operated Drop Valve (Phantom T) with full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
251001701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male inlet connection.
Marking:
Dudley on cistern, 6l line inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/10/2030
Model:
Phantom S, Phantom V & Phantom T

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250902719

W/C suite with pan (polyester) and a concealed flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a single flush drop valve for full flush volumes of up to 6 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 Bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
250902719
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Wallgate logo and model code on adhesive label inside cistern. 6L waterline marked inside cistern.
Installation Requirements:
R001 R559
Expiry date:
30/09/2030
Model:
CIST19-PNEU-2

Manufacturer:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058

View All Listings by this Company

Print This Approval


#250908901

Section:
0531 Combination Tap Assemblies
Description:
A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
Wall Mounted Undefinable Air Gap - See IRN's
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
TVT103002000xxxx1/2" BSP M10 bar60 °CVilleroy and Boch logohandleNoCeramic cartridgeAerator
TVT104001000xxxx1/2" BSP M10 bar60 °CVilleroy and Boch logohandleNoCeramic cartridgeAerator

Notes & Further Information

Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Product Images

Approval Holder:
In Compliance GmbH
Company Name
In Compliance GmbH
Address
Kathe-Kollwitz-Ring 5a Unna
Postcode
59423
Country
Germany
General Email
jutta.emge-degenhardt@in-compliance.de

View All Listings by this Company

Print This Approval


#250905901

Section:
0531 Combination Tap Assemblies
Description:
A Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
Wall Mounted Undefinable Air Gap - See IRN's
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
TVT105501110XXSee Below1/2" BSP M10 bar60 °CVilleroy and Boch logoLeverNoCeramic cartridgeAerator

Notes & Further Information

Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Product Images

Approval Holder:
In Compliance GmbH
Company Name
In Compliance GmbH
Address
Kathe-Kollwitz-Ring 5a Unna
Postcode
59423
Country
Germany
General Email
jutta.emge-degenhardt@in-compliance.de

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1004 of 1022

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.