'01/B80NBR 'O' rings' and gaskets. Black coloured, injection moulded NBR 'O' rings and gaskets. Shore hardness 80. Tested in-radii sizes between 0.5mm & 2.0mm. For use with water up to 23°C.

Section:

5390 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) - components.

WRAS Approval Number:

251255033

Expiry date:

31/12/2030

Approval Holder:

LAV.EL. Gomma Srl

Company Name

LAV.EL. Gomma Srl

Address

Via Aldo Moro 20/22 25033 - Cologne (BS)

Country

Italy

Phone

0039.030.70.50.956

General Email

info@lavelgomma.it

View All Listings by this Company

'LSR2650, LSR2660 & LSR2670'. Black coloured, injection moulded liquid silicone rubber materials. Shore hardness between 50 & 70. 'LSR 2660 White'. White coloured, injection moulded liquid silicone rubber material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

251255037

Expiry date:

31/12/2030

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

'KEG-2003H-30, KEG-2003H-40, KEG-2003H-50, KEG-2003H-60 & KEG-2003H-70 (no postcure)'. Translucent, compression moulded, silicone rubber materials. Shore hardness between 30 & 70. Tested in-radii sizes between 0.18mm & 5.9mm. For use with water up to 85°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

251255050

Expiry date:

31/12/2030

Approval Holder:

Shin-Etsu Silicones Europe B.V.

Company Name

Shin-Etsu Silicones Europe B.V.

Address

Bolderweg 32 1332 AV Almere The Netherlands

Phone

+31 (0) 36 549 31 70

General Email

sese_info@shinetsu.nl

View All Listings by this Company

Single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass body), flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator, and the inlet hoses are supplied with stainless steel strainers. The inlet hose has and an approved check valve cartridge: however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

251102014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless Steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections

Marking:

Grohe on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Model:

36.366.002

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

251202726

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

BAGBODESIGN & model inside cistern, 6 litre line inside cistern.

Installation Requirements:

R001 R556

Expiry date:

31/12/2030

Model:

BAGNODESIGN BDS-K133-A01-ESG6

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

260102705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Bagnodesign and model inside cistern, 6 litre line inside cistern.

Installation Requirements:

R001 R556 R571

Expiry date:

31/01/2031

Model:

BAGNODESIGN BDS-K301-A01-ESG6 & BDS-K301-D01-ESG4

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

260101705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Male or 15mm Push-fit Inlet connection.

Marking:

Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.

Installation Requirements:

R001 R280

Expiry date:

31/01/2031

Model:

Element Cistern

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Concealed WC flushing cisterns and pan, incorporating a compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by either an IR sensor or a piezo button. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 Bar Cold water use only.

Section:

2041 WC suites

Section Subtitle:

Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.

WRAS Approval Number:

251202727

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Wallgate and model on control box. 6 litre line inside cistern

Installation Requirements:

R001 R559

Expiry date:

31/12/2030

Model:

CIST19-OPC: CIST19-OPC is used with Wallgate CWC Series 250 & 150 range of WC pans as follows: CWC-250, CWC-251, CWC-255, CWC-256, CWC-270-L, CWC- 270-R, CWC-280, CWC-281.

Approval Holder:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane, Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Section:

1670 Shower Outlets

Description:

A Range of Shower kit(s)

Wall mounted.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/12/2030

Approval Holder:

ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD

Company Name

ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD

Address

Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave Jiaojiang District, Taizhou City Zhejiang Province

Postcode

318000

Country

CHINA

Phone

+86-576-88675561

General Email

weijoy@weijoy.cn

View All Listings by this Company

Manufacturers:

ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD

Section:

1670 Shower Outlets

Description:

A Range of Shower kit(s)

Wall Mounted Some models incorporate wall outlets - See manufacturer’s instructions for model-specific details.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Approval Holder:

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Company Name

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Address

Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Manufacturers:

ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD