Water Regulations Approval Scheme Ltd

Fittings for use with Tube and Pipe

Section Code 1180 : Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

WRAS Approval Number: #250402008

Range of Copper and Brass push fit fittings. Brass fittings are for use with PB pipe (manufactured to BS7291-2) & Copper pipe (manufactured to BS EN 1057) only. Copper fittings are for use with PB pipe (manufactured to BS7291-2), PE-X pipe (manufactured to BS7291-3) & Copper pipe (manufactured to BS EN 1057). Maximum working pressures and operating temperatures when used with: PB & PEX pipe – 3.0 bar and 92°C, 20.0 bar cold water. Copper pipe – 20.0 bar and 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250402008
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm – 22mm.
Marking:: TLC Logo and size on body
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: Copper Model Code (Size): SCE6711M (10mm Pushfit) SCE6744M (Push-fit 22mm) SCE6766M (15mm Pushfit) SCE6766MC (15mm Pushfit) SCAE6766M (15mm Pushfit) SCASE6766M (15mm Pushfit) SCRD6716M (10mm x 15mm Pushfit Stem) SCRD6764M (15mm x 22mm Pushfit Stem) SCSE6766M (15mm Pushfit) SCU6711M (10mm Pushfit) SCU6744M (22mm Push-fit) SCU6766M (15mm Pushfit) SCU6766MC (15mm Pushfit) SCT67444M (22mm Push-fit) SCT67446M (22mm x 22mm x 15mm Push-fit) SCT67666M (15mm Pushfit) SCST676M (15mm Push-fit) SCST674M (22mm Push-fit) Brass Model Code (Size): SBDE6766M (15mm Pushfit) SBDMC6764M (15mm Pushfit x 1/2” BSPT (M)) SBDME6764M (15mm Pushfit x 1/2” BSPT (M)) SBDU6766M (15mm Pushfit) SBDT67666M (15mm Pushfit)

Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro 678 beon-gil Seo-gu Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250302053

Flomasta Range of plastic, push-fit fittings (wall plate elbow, equal elbow, end stop, pipe insert, equal straight and equal tee) for use with MDPE pipe (manufactured to BS EN 12201), for above and below ground use. Copper adaptors are for use with PB pipe (manufactured to BS7291-2), PEX pipe (manufactured to BS7291-3) or Copper pipes (manufactured to BS EN 1057) and are for above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250302053
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to models
Marking:: TLC logo and size on body. Size and PN on plastic nut.
Installation Requirements:: R001
Expiry date:: 31/03/2030
Model:: Flomasta Range of plastic push-fit fittings SMDCA6726M - 20mm X 15mm. SMDCA6784M - 25mm X 22mm. SMDCA6786M - 25mm X 15mm. SMDE6722M, SMDST672M, SMTS20M, SMDU6722M & SMDT67222M - 20mm. SMDE6788M, SMDST678M, SMDU6788M, SMDT67888M & SMTS25M - 25mm. SMDWP6784M - 25mm x ½” BSP (M). SMDWP6724M - 20mm x ½” BSP (F) (Wall Plate Elbow).

Approval Holder:: Kingfisher Plc.

Company Name
Kingfisher Plc.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro 678 beon-gil Seo-gu Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250402063

Flomasta Range of Copper and Brass push fit fittings. Brass fittings are for use with PB pipe (manufactured to BS7291-2) & Copper pipe (manufactured to BS EN 1057) only. Copper fittings are for use with PB pipe (manufactured to BS7291-2), PE-X pipe (manufactured to BS7291-3) & Copper pipe (manufactured to BS EN 1057). Maximum working pressures and operating temperatures when used with: PB & PEX pipe – 3.0 bar and 92°C, 20.0 bar cold water. Copper pipe – 20.0 bar and 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250402063
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm – 22mm.
Marking:: TLC Logo and size on body
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: Copper Model Code (Size): SCE6711M (10mm Pushfit) SCE6744M (Push-fit 22mm) SCE6766M (15mm Pushfit) SCE6766MC (15mm Pushfit) SCAE6766M (15mm Pushfit) SCASE6766M (15mm Pushfit) SCRD6716M (10mm x 15mm Pushfit Stem) SCRD6764M (15mm x 22mm Pushfit Stem) SCSE6766M (15mm Pushfit) SCU6711M (10mm Pushfit) SCU6744M (22mm Push-fit) SCU6766M (15mm Pushfit) SCU6766MC (15mm Pushfit) SCT67444M (22mm Push-fit) SCT67446M (22mm x 22mm x 15mm Push-fit) SCT67666M (15mm Pushfit) SCST676M (15mm Push-fit) SCST674M (22mm Push-fit) Brass Model Code (Size): SBDE6766M (15mm Pushfit) SBDMC6764M (15mm Pushfit x 1/2” BSPT (M)) SBDME6764M (15mm Pushfit x 1/2” BSPT (M)) SBDU6766M (15mm Pushfit) SBDT67666M (15mm Pushfit)

Approval Holder:: Kingfisher Plc.

Company Name
Kingfisher Plc.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX
Phone
+44 (0) 20 7372 8008

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro 678 beon-gil Seo-gu Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250512018

Range of DZR brass push fit fittings for use with copper pipe (EN1057). Maximum working pressure 10.0 Bar. Maximum operating temperature 65 °C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250512018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: “IDC” logo & size on body.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: 2PAA014 - Push-fit straight fitting 1/2”(14.7mm), 2PAA021 - Push-fit straight fitting 1/2”(14.7mm), 2PAB014 - Push-fit Elbow fitting 1/2”(14.7mm), 2PAB021 - Push-fit Elbow fitting 3/4”(21mm), 2PAC014 - Push-fit equal Tee fitting 1/2”(14.7mm), 2PAC021 - Push-fit equal Tee fitting 3/4”(21mm), 2PAD014 - Push-fit Stop End 1/2”(14.7mm), 2PAD021 - Push-fit Stop End 3/4”(21mm), 2PAE002 - Push-fit x Male straight adapter 1/2”(14.7mm) x 3/4”M, 2PAA121 - Push-fit Reduce straight adapter 3/4”(21mm) x 1/2”(14.7mm), 2PPA142 - Pushfit Straight Pushfit x Pipe 1/2”(14.7mm) x 3/4”(21mm), 2PAC221 - Push-fit Reduce Tee fitting 3/4”(21mm) x 3/4”(21mm) x 1/2”(14.7mm), 2PAC211 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 1/2”(14.7mm), 2PAC212 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 3/4”(21mm).

Approval Holder:: IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

WRAS Approval Number: #2106063

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2106063
Size:: 15mm to 54mm
Marking:: RP - Rapid Press, WRAS Approved Product logo, Size & batch number.
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: CCP015 - CCP054 15 - 54mm. FRCP Reducer x press: 22mmx15mm - FRCP022015 28mmx15mm - FRCP028015 28mmx22mm - FRCP022022 35mmx22mm - FRCP035022 35mmx28mm - FRCP035028 42mmx22mm - FRCP042022 42mmx28mm - FRCP042028 42mmx35mm - FRCP042035 54mmx35mm - FRCP054035 54mmx42mm - FRCP054042 SECP015 - SECP054 Bend 90° x press: 15 - 54mm. ECP015 - EPC054 Bend 90° press x press: 15 - 54mm. ETCP015 - ETCP054 Equal Tee 3 x press: 15 - 54mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. OECP015 - OECP054 Bend 45° press x press: 15 - 54mm. RTCP015015022 -RTCP054054042 Reducing Tee 3 x press: 15mmx22mmx15mm 22mmx15mmx22mm 28mmx15mmx28mm 28mmx22mmx28mm 35mmx15mmx35mm 35mmx22mmx35mm 35mmx28mmx35mm 42mmx22mmx42mm 42mmx28mmx42mm 42mmx35mmx42mm 54mmx28mmx54mm 54mmx35mmx54mm 54mmx42mmx54mm 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:: Rapid Press Fittings Ltd

Company Name
Rapid Press Fittings Ltd
Address
2 Penrod Way Heysham
Postcode
LA3 2UZ

View All Listings by this Company