Valves

Section Code 2345 : Special combination assemblies.

Back To Directory Sections

#241204702

‘Satefy group’ with a brass inlet and a DZR brass body which incorporates a lever operated spherical valve, followed by an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and a plastic bodied pressure relief valve (set at 6.0 bar). The product incorporates a test point. The compression connections are for use copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
241204702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
Caleffi logo, DN15, CR mark and flow arrow cast on body. Date of manufacture WW/YY printed on body. Caleffi and Caleffi logo, flow arrow, CE marking on pressure relief valve body. 6 bar, size, EN1491 and other technical information on pressure relief valve operating gear
Installation Requirements:
R001 R008 R120
Expiry date:
31/12/2029
Model:
528716

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#241002701

Range of cold-water inlet control groups consisting of an in-line, manually adjustable pressure reducing valve and a pressure relief valve pre-set at either 6.0 or 8.0 bar, housed within DZR brass bodies. The products incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. The pressure reducing valves also have stainless-steel strainers. Maximum inlet pressure 16.0 bar. Cold water use only. CWIC351300 – Outlet pressure range 1.0 to 3.5 bar. Pressure relief valve set at 6.0 bar CWIC351301 – Outlet pressure range 1.0 to 2.1 bar. Pressure relief valve set at 8.0 bar. CWIC351303 – Outlet pressure range 1.0 to 3.5 bar. Pressure relief valve set at 8.0 bar CWIC351306 – Outlet pressure range 1.5 to 6.0 bar. Pressure relief valve set at 8.0 bar

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
241002701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
For use with copper pipe to BS EN 1057
Size:
28mm compression inlets and outlets
Marking:
Pressure reducing valve: RWC on cover. Flow arrow, DR and size on body. Pressure relief valve: Reliance, size and pressure on cap. Flow arrow and DR on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
CWIC351300 CWIC351301 CWIC351303 CWIC351306
Product Images

Manufacturer:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060

View All Listings by this Company

Print This Approval


#241002712

Inlet control group with a DZR brass body, consisting of a pressure reducing valve and pressure relief valve (6.0 Bar). The inlet incorporates a stainless-steel strainer, and the outlet incorporates an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The product is for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C. Outlet pressure range of the pressure reducing valve is 1.0 to 4.0 bar.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
241002712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression
Marking:
Intatec logo, CR , PN & DN on body. Intatec logo, 6.0 bar & BSEN 14941 on cap.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
UVGS22BC MODELS ADDED JULY 2025 UVGS22BC45 UVGS22BC08
Product Images

Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180

View All Listings by this Company

Print This Approval


#250702718

Inlet control group with a DZR brass body, consisting of a pressure reducing valve and pressure relief valve (4.5, 6.0 or 8.0 Bar). The inlet incorporates a stainless-steel strainer, and the outlet incorporates an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The product is for use with copper pipe to BS EN 1057. Outlet pressure range of the pressure reducing valve is 1.0 to 4.0 bar Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
250702718
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression
Marking:
Intatec logo, CR , flow arrow, PN & DN on body. Intatec logo, 6.0 bar & BSEN 14941 on cap.
Installation Requirements:
R001
Expiry date:
31/07/2030
Model:
UVGS22GH06 UVGS22GH08 UVGS22GH45

Print This Approval


#250704710

Monobloc manifold containing an in-line pressure reducing valve (Adjustment Range between 2.7 and 3.3 bar, but factory pre-set at 3 bar) and a pre-set expansion relief valve (pre-set pressure 6 bar) housed in a DZR brass body with an EPDM rubber diaphragm. The product incorporates also a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Inlets and outlets have compression connections, for use with copper pipe to EN1057. Maximum working pressure 12 bar. Maximum operating temperature 80°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
250704710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm Compression
Marking:
Officine Rigamonti spa logo, flow arrow and CR cast on body. Officine Rigamonti spa logo, size and CR cast on pressure relief valve body. PN10, 115℃ and CE mark etched on on pressure relief valve body. 6 bar and Made in Italy on operating gear.
Installation Requirements:
R001 R120
Expiry date:
31/07/2030
Model:
Art.0218.999 Control Group Multiblock

Approval Holder:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Country
Italy
Phone
+39 0163 48 165 Fax: +39 0163347254
General Email
info@officinerigamonti.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.