Water Regulations Approval Scheme Ltd

BAGNODESIGN (SANIPEXGROUP) Approvals

WRAS Approval Number: #241002107

T type thermostatic blending valve with (brass body - chrome plated finish). The inlets incorporate a stainless-steel strainer. For use with copper pipe (BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 241002107
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm Compression
Marking:: AQUAECO and flow arrow on body. Temperature, pressure, technical information and WRAS on cap.
Installation Requirements:: R001 R010 R040 R120
Expiry date:: 31/10/2029
Model:: AQM-WRM-T301A-CON-CP - AQUAECO THERMOSTATIC VALVE

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #250702023

Range of angle valves (brass bodies – various finishes) incorporating a quarter turn ceramic disc headwork with single lever operating members. Maximum working pressure 5.0 Bar, Maximum operating temperature 60.0°C

Section:: 2170 Valves
Section Subtitle:: Flow control, manually operated.
WRAS Approval Number:: 250702023
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Aquaeco on operating member
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: AQP-ANG-122-XX – 1/2" BSP (M) inlet X 1/2"BSP (M) outlet AQP-ANG-138-XX – 1/2" BSP (M) inlet X 3/8" BSP (M) outlet ‘XX’ denotes finish and is replaced with: Chrome (CP), Brushed Nickel (NB), Matt Black (MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #2210391

Single hole, single outlet (fixed) combination tap assemblies (chrome plated brass body) incorporating a ceramic cartridge headwork with various operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 2210391
Size:: Stainless steel braided, PEX lined flexible hose assembly incorporating ½” BSP (F) captive nut.
Marking:: Bagno Design on body
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/10/2027
Model:: Conrad deck mounted mono tall basin mixer without waste BDM-CND-302S-XX Mezzanine deck mounted mono tall basin mixer without waste BDM-MEZ-302S-B-XX M-LINE project deck mounted mono tall basin mixer without waste BDM-MLP-302S-XX Nara deck mounted mono tall basin mixer without waste BDM-NAR-302S-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #2210392

Wall mounted, two-hole, single outlet (fixed) combination tap assemblies, incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0510 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 2210392
Size:: ½” BSP (F)
Marking:: Bagno Design on body
Installation Requirements:: R001 R010 R040
Expiry date:: 31/10/2027
Model:: BDM-CND-E305-XX Conrad trim part for wall mounted concealed basin mixer XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #240204071

A single-hole single outlet swivel combination tap assembly with brass body (chromium plated). Incorporating ceramic cartridge headwork. The spout outlet incorporate a plastic aerator. Maximum working pressure - 10 bar. Maximum operating temperature - 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 240204071
Size:: Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:: Bagno Design on body.
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 28/02/2029
Model:: M-LINE Diffusion kitchen sink mixer BDM-MLI-461-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Manufacturer:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU

View All Listings by this Company
Manufacturer:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU

View All Listings by this Company

WRAS Approval Number: #2212377

Range of single hole, single outlet fixed combination tap assemblies (brass body with various finishes), incorporating a ceramic cartridge headwork with either a single lever or cross top operating member. The spout outlets incorporate a plastic aerator. Products are supplied with PEX inner-lined grey plastic braided inlet hoses. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 2212377
Size:: ½” BSP captive nut.
Marking:: Bagno Design on body
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/12/2027
Model:: Conrad deck mounted mono basin mixer with pop-up waste BDM -CND-301-A-XX Conrad deck mounted mono basin mixer without waste BDM -CND-301S-A-XX Mezzanine deck mounted mono basin mixer with pop-up waste BDM-MEZ-301-B-XX Nara deck mounted mono basin mixer without waste BDM-NAR-301S-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #2301378

Range of shower outlets with brass bodies (various finishes) and NBR ‘O’-rings. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2301378
Size:: 15mm compression
Marking:: Bagnodesign on handset & faceplate.
Installation Requirements:: R001 R040
Expiry date:: 31/01/2028
Model:: BDP-OUT-R602-XX ROUND WALL OUTLET WITH BRACKET BDD-HSW-535-A-XX & BDD-HSW-535-XX HAND SHOWERS XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #241002112

Range of combined bath waste and overflow assemblies in various finishes.(see models for finishes) Maximum operating temperature: 60ºC

Section:: 0681 Combination Tap Assemblies
Section Subtitle:: Miscellaneous.
WRAS Approval Number:: 241002112
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet use only.
Size:: Stainless steel braided, EPDM lined, flexible hose assembly with 1½” BSP (M) (Pop Up Waste)
Marking:: Bagnodesign logo on face plate & WRAS on hose connection ferrule.
Installation Requirements:: R001 R576
Expiry date:: 31/10/2029
Model:: BDP-ZEP-110-XX (waste and overflow). XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #241208006

Wall mounted two hole, single outlet (fixed) combination tap assembly (brass body, various finishes), incorporating ceramic cartridge headwork and single lever operating member. The spout incorporates a plastic aerator. Maximum working pressure: 5.0 bar. Maximum operating temperature: 60°C.

Section:: 0510 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 241208006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F).
Marking:: Bagnodesign on the escutcheon
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2029
Model:: REVOLUTION TRIM PART FOR CONCEALED 2 HOLE BASIN MIXER (Knurled Handle) BDM-REV-E315-XX BRISTOL TRIM PART FOR CONCEALED 2 HOLE BASIN MIXER BDM-BIS-E315L-XX FONTEYN TRIM PART FOR WALL MOUNTED CONCEALED 2 HOLE BASIN MIXER BDM-FTY-E315L-XX ‘XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #2211381

Range of wall mounted, thermostatic blending valves incorporating ceramic disc diverter cartridges. Inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to verify backflow protection. Product also had manual override button, with variations of dome and single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 2211381
Note:: Does not include hose and handset.
Size:: 3/4” BSP (F) captive nuts. Supplied with ½” x ¾” BSP (M) offset unions.
Marking:: BAGNODESIGN valve body.
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2027
Model:: BDM-MLP-T101-EXP-XX

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company