BAGNODESIGN (SANIPEXGROUP) Approvals


#2009031

Range of concealed 2 and 3 outlet thermostatic mixers with brass bodies and thermostatic cartridge controlling the temperature. The inlets incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2009031
Size:
¾” BSP female
Marking:
Bagnodesign on faceplate.
Installation Requirements:
R001 R040
Expiry date:
30/09/2025
Model:
"M-LINE DIFFUSION" 2” outlet thermostatic shower mixer BDM-MLI-T302-CP (Chrome Plated) BDM-MLI-T302-NB (Brushed Nickel) "M-LINE DIFFUSION" 3” outlet thermostatic shower mixer BDM-MLI-T303-CP (Chrome Plated) BDM-MLI-T303-NB (Brushed Nickel)
Product Images

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2104047

Range of wall mounted, concealed, manually operated blending valves with brass bodies (various finish trim kits - see model) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2104047
Note:
This approval does not include a shower hose, shower handset or spout outlet.
Size:
½” BSP (F)
Marking:
Bagnodesign on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2026
Model:
BDM-MLI-512011-A-BK (Black). BDM-MLI-512011-A-CP (Chrome Plated). BDM-MLI-512011-A-CR (Copper). BDM-MLI-512011-A-NB (Brushed Nickel). BDM-MLI-512011-A-ZB (Zanzibar). BDM-PRI-512008-A-BZ (Bronze). BDM-PRI-512008-A-CP (Chrome Plated). BDM-PRI-512008-A-CR (Copper). BDM-PRI-512008-A-GD (Gold). BDM-PRI-512008-A-NB (Brushed Nickel). BDM-PRI-512008-A-ZB (Zanzibar). BDM-REV-410-CP (Chrome Plated). BDM-REV-410-MB (Matt Black). BDM-REV-410-NB (Brushed Nickel). BDM-REV-410-ZB (Zanzibar).
Product Images

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2106033

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2106033
Size:
½” BSP (F)
Marking:
BAGNODESIGN on faceplate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2026
Model:
BDM-TOK-309-CP (Chrome plated), BDM-TOK-309-NB (Brushed nickel), BDM-TOK-309-ZB (Zanzibar).
Product Images

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2012089

AQUAECO RANGE OF WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012089
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K301-AO1-ESG2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED, AQP-K301-B01-ESG2 WC CONCEALED DUAL FLUSHING CISTERN INSERT FRAME INCLUDED & AQP-K301-DO1-ESG2WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2012090

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012090
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K133-A01-ESG2 WC concealed dual flushing cistern Frame included

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2012091

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012091
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K210-A01-ESG2 WC concealed dual flushing cistern Frame included AQP-K210-D03-ESG2 WC concealed dual flushing cistern No frame

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2103007

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow aerator. The AQE-DIP-301-CP model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2103007
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½ ” BSP captive nut end connections.
Marking:
Aquaeco on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2026
Model:
AQE-DIP-301-CP (with pop-up waste) AQE-DIP-301S-CP (without pop-up waste)

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2210375

Single hole, single outlet (fixed) combination tap assemblies (brass body- various finishes) incorporating a ceramic cartridge headwork with various operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2210375
Size:
Stainless steel braided, PEX lined flexible hose assembly incorporating ½” BSP (F) captive nut.
Marking:
AQUAECO ON TAP BODY
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2027
Model:
AQM-CND-302S-CP (Chrome Plated) CONRAD MONO TALL SMOOTH BODIED BASIN MIXER AQM-CND-302S-MB (Matt Black) CONRAD MONO TALL SMOOTH BODIED BASIN MIXER

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2212352

Range of single hole, single outlet fixed combination tap assemblies (brass body - various finishes), incorporating a ceramic cartridge headwork with either a single lever or cross top operating member. The spout outlets incorporate a plastic aerator. Products are supplied with PEX inner-lined grey plastic braided inlet hoses. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2212352
Size:
½” BSP captive nut.
Marking:
Bagnodesign on tap body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2027
Model:
BDM-CLI-401S-CP (Chrome Plated), BDM-CLI-401S-NB (Brushed Nickel), C-LINE SINGLE, BDM-MLP-301S-CP (Chrome Plated), BDM-MLP-301S-MG (Matt Grey), BDM-MLP-301S-NB (Brushed Nickel), BDM-MLP-301S-MB (Matt Black) M-LINE PROJECT Model added January 2024 PROJECT MONO BASIN MIXER BDM-PRO-111183-A-XX XX’ denotes finish and is replaced with: Chrome Brushed Nickel Matt Black Anthracite Lacquered Zanzibar Gold PVD Gold Soft Bronze Santiago Oyster Burgundy

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2303372

Series of wall mounted, thermostatic mixer valve with brass bodies, diverter headwork that controls flow between one, two or three outlets (see model) with various type of operating member. The temperature is controlled independently via a thermostatic cartridge operating member with a manual override button. Inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 55°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2303372
Size:
¾” BSP(F)
Marking:
Bagnodesign on backplate
Installation Requirements:
R001 R040
Expiry date:
31/03/2028
Model:
BDM-UNI-T301-CON-CP (CHROME PLATED) BDM-UNI-T301-CON-NB (BRUSHED NICKEL) BDM-UNI-T301-CON-MB (MATT BLACK) UNIVERSAL CONCEALED PART FOR THERMOSTATIC SHOWER MIXER WITH 1 OUTLET BDM-UNI-T302-CON-CP (CHROME PLATED) BDM-UNI-T302-CON-NB (BRUSHED NICKEL) BDM-UNI-T302-CON-MB (MATT BLACK) UNIVERSAL CONCEALED PART FOR THERMOSTATIC SHOWER MIXER WITH 2 OUTLETS BDM-UNI-T303-CON-CP (CHROME PLATED) BDM-UNI-T303-CON-NB (BRUSHED NICKEL) BDM-UNI-T303-CON-MB (MATT BLACK) UNIVERSAL CONCEALED PART FOR THERMOSTATIC SHOWER MIXER WITH 3 OUTLETS

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.