Range of brass press fittings with EPDM ‘O’-rings for use with Rifeng B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2005369

Size:

12mm, 16mm, 20mm , 25mm, 26mm & 32mm

Marking:

Size, RIIFO, WRAS, date of manufacture (yyyy/mm) on body. Size, RIIFO, WRAS, date of manufacture and time (YYYYMMDDHHMMSS) & batch no on pipe. F1 Models - Size, RIIFO, date of manufacture (yyyy/mm) on body.

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

B1 multilayer PEX/AL/PEX pipe, F1C compression fittings & F5 press fittings. Multilayer PEX/AL/PEX Pipes B1-0912 Multilayer PEX/AL/PEX Pipes B1-1216 Multilayer PEX/AL/PEX Pipes B1-1620 Multilayer PEX/AL/PEX Pipes B1-2025 Multilayer PEX/AL/PEX Pipes B1-2026 Multilayer PEX/AL/PEX Pipes B1-2632 F5 Equal straight union F5-S0912*0912; F5-S1216*1216; F5-S1620*1620 F5-S2025*2025; F5-S2026*2026; F5-S2632*2632 F5 Reducer F5-S1216*0912; F5-S1620*0912; F5-S1620*1216 F5-S2025*0912; F5-S2025*1216; F5-S2025*1620 F5-S2026*0912; F5-S2026*1216; F5-S2026*1620 F5-S2632*0912; F5-S2632*1216; F5-S2632*1620 F5-S2632*2025 ;F5-S2632*2026 F5 Male straight union F5-S0912*1/2 ; F5-S0912*3/4 ; F5-S1216*3/8; F5-S1216*1/4 F5-S1216*1/2 ; F5-S1216*3/4 ; F5-S1216*1 ; F5-S1620*3/8 F5-S1620*1/2; F5-S1620*3/4 ; F5-S1620*1 ; F5-S2025*1/2 F5-S2025*3/4 ; F5-S2025*1 ; F5-S2026*1/2; F5-S2026*3/4; F5-S2026*1 ; F5-S2632*1/2; F5-S26 32*3/4 ; F5-S2632*1 ; F5-S2632*1 1/4 ; F5-S2632*1 1/2 F5 Male straight union F5-S0912*1/2 ; F5-S0912*3/4 ; F5-S1216*3/8; F5-S1216*1/4 F5-S1216*1/2 ; F5-S1216*3/4 ; F5-S1216*1 ; F5-S1620*3/8 F5-S1620*1/2; F5-S1620*3/4 ; F5-S1620*1 ; F5-S2025*1/2 F5-S2025*3/4 ; F5-S2025*1 ; F5-S2026*1/2; F5-S2026*3/4; F5-S2026*1 ; F5-S2632*1/2; F5-S26 32*3/4 ; F5-S2632*1 ; F5-S2632*1 1/4 ; F5-S2632*1 1/2 F5 Female straight union F5-S0912*1/2F;F5-S0912*3/4F ;F5-S1216*3/8F;F5-S1216*1/4F F5-S1216*1/2F;F5-S1216*3/4F;F5-S1216*1F;F5-S1620*3/8F F5-S1620*1/2F;F5-S1620*3/4F;F5-S1620*1F;F5-S2025*1/2F F5-S2025*3/4F;F5-S2025*1F;F5-S2026*1/2F;F5-S2026*3/4F F5-S2026*1F;F5-S2632*1/2F;F5-S2632*3/4F;F5-S2632*1F F5-S2632*1 1/4F;F5-S2632*1 1/2F F5 Equal elbow F5-L0912*0912 ;F5-L1216*1216; F5-L1620*1620 F5-L2025*2025; F5-L2026*2026 ;F5-L2632*2632 F5 Unequal elbow F5-L1216*0912 ;F5-L1620*0912 ;F5-L1620*1216 F5-L2025*0912 ;F5-L2025*1216 ;F5-L2025*1620 F5-L2026*0912 ;F5-L2026*1216 ;F5-L2026*1620 F5-L2632*0912 ;F5-L2632*1216 ;F5-L2632*1620 F5-L2632*2025 ;F5-L2632*2026 F5 Male elbow F5-L0912*1/2 ; F5-L0912*3/4 ;F5-L1216*3/8 ;F5-L1216*1/4 F5-L1216*1/2 ;F5-L1216*3/4 ;F5-L1216*1 ;F5-L1620*3/8 F5-L1620*1/2; F5-L1620*3/4 ;F5-L1620*1 ;F5-L2025*1/2 F5-L2025*3/4 ;F5-L2025*1 ;F5-L2026*1/2 ;F5-L2026*3/4 F5-L2026*1 ;F5-L2632*1/2 ;F5-L2632*3/4 ;F5-L2632*1 F5-L2632*1 1/4 ;F5-L2632*1 1/2 F5 Female elbow F5-L0912*1/2F;F5-L0912*3/4F;F5-L1216*3/8F;F5-L1216*1/4F F5-L1216*1/2F;F5-L1216*3/4F;F5-L1216*1F;F5-L1620*3/8F F5-L1620*1/2F;F5-L1620*3/4F;F5-L1620*1F;F5-L2025*1/2F F5-L2025*3/4F;F5-L2025*1F;F5-L2026*1/2F;F5-L2026*3/4F F5-L2026*1F;F5-L2632*1/2F;F5-L2632*3/4F;F5-L2632*1F F5-L2632*1 1/4F;F5-L2632*1 1/2F F5 Equal tee F5-T0912*0912*0912 ; F5-T1216*1216*1216 F5-T1620*1620*1620 ;F5-T2025*2025*2025 F5-T2026*2026*2026 ;F5-T2632*2632*2632 F5 Unequal tee F5-T1216*1620*1216 ; F5-T1620*1216*1216 F5-T1620*1620*1216 ;F5-T1620*2025*1620 F5-T2025*1216*1216 ;F5-T2025*1216*1620 F5-T2025*1216*2025 ;F5-T2025*1620*1216 F5-T2025*1620*1620 ;F5-T2025*1620*2025 F5-T2025*2025*1216 ;F5-T2025*2025*1620 F5-T2025*2632*2025 ;F5-T2632*1216*2632 F5-T2632*1620*2632 ;F5-T2632*2025*2025 F5-T2632*2025*2632 ;F5-T0912*1216*0912 F5-T2632*2026*2632 F5 Male tee F5-T0912*1/2*0912 ;F5-T0912*3/4*0912;F5-T1216*3/8*1216 F5-T1216*1/4*1216;F5-T1216*1/2*1216;F5-T1216*3/4*1216 F5-T1216*1*1216;F5-T1620*3/8*1620;F5-T1620*1/2*1620 F5-T1620*3/4*1620;F5-T1620*1*1620;F5-T2025*1/2*2025 F5-T2025*3/4*2025;F5-T2025*1*2025;F5-T2026*1/2*2026 F5-T2026*3/4*2026;F5-T2026*1*2026;F5-T2632*1/2*2632 F5-T2632*3/4*2632;F5-T2632*1*2632;F5-T2632*1 1/4*2632 F5-T2632*1 1/2*2632 F5 Female tee F5-T0912*1/2F*0912 ;F5-T0912*3/4F*0912 F5-T1216*3/8F*1216; F5-T1216*1/4F*1216 F5-T1216*1/2F*1216 ;F5-T1216*3/4F*1216 F5-T1216*1F*1216 ;F5-T1620*3/8F*1620 F5-T1620*1/2F*1620 ;F5-T1620*3/4F*1620 F5-T1620*1F*1620 ;F5-T2025*1/2F*2025 F5-T2025*3/4F*2025 ;F5-T2025*1F*2025 F5-T2026*1/2F*2026 ;F5-T2026*3/4F*2026 F5-T2026*1F*2026 ;F5-T2632*1/2F*2632 F5-T2632*3/4F*2632 ;F5-T2632*1F*2632 F5-T2632*1 1/4F*2632 ;F5-T2632*1 1/2F*2632 F5 Demountable female straight union F5-S0912*1/2F(H) ;F5-S0912*3/4F(H); F5-S1216*3/8F(H) F5-S1216*1/4F(H) ;F5-S1216*1/2F(H);F5-S1216*3/4F(H) F5-S1216*1F(H);F5-S1620*3/8F(H);F5-S1620*1/2F(H) F5-S1620*3/4F(H);F5-S1620*1F(H);F5-S2025*1/2F(H) F5-S2025*3/4F(H);F5-S2025*1F(H);F5-S2026*1/2F(H) F5-S2026*3/4F(H);F5-S2026*1F(H);F5-S2632*1/2F(H) F5-S2632*3/4F(H);F5-S2632*1F(H);F5-S2632*1 1/4F(H) F5-S2632*1 1/2F(H) F5 End cap F5-D0912 ;F5-D1216 ;F5-D1620 ;F5-D2025;F5-D2026;F5-D2632 F1C Equal tee F1-T0912*0912*0912 C F1-T1216*1216*1216 C F1-T1620*1620*1620 C F1-T2025*2025*2025 C F1-T2026*2026*2026 C F1-T2632*2632*2632 C F1C Unequal tee F1-T0912*1216*0912 C ；F1-T2632*2026*2632 C F1-T1620*2026*1620 C ；F1-T1216*1620*1216 C F1-T1216*2025*1216 C ；F1-T1620*1216*1216 C F1-T1620*1216*1620 C ；F1-T1620*1620*1216 C F1-T2025*1216*2025 C ；F1-T2025*1620*1620 C F1-T2025*1620*2025 C ；F1-T 2025*2025*1620 C F1-T2632*1620*2632 C ；F1-T2632*2025*2632 C F1-T2632*1216*2632 C ；F1-T2026*2026*1620 C F1-T2026*1620*2026 C F1C Equal elbow F1-L0912*0912 C ；F1-L1216*1216 C F1-L1620*1620 C ；F1-L2025*2025 C F1-L2026*2026 C ；F1-L2632*2632 C F1C Female tee F1-T0912*1/2F*0912 C ；F1-T0912*3/4F*0912 C F1-T1216*3/8F*1216 C ；F1-T1216*1/2F*1216 C F1-T1216*3/4F*1216 C ；F1-T1216*1F*1216 C F1-T1620*1/2F*1620 C ；F1-T1620*3/4F*1620 C F1-T2025*1/2F*2025 C ；F1-T2025*3/4F*2025 C F1-T2025*1F*2025 C ；F1-T2026*3/4F*2026 C F1-T2026*1F*2026 C ；F1-T2632*3/4F*2632 C F1-T2632*1F*2632 C F1C Female elbow F1-L0912*1/2F C；F1-L0912*3/4F C；F1-L1216*3/8F C F1-L1216*1/2F C；F1-L1216*3/4F C ；F1-L1216*1F C F1-L1620*1/2F C ；F1-L1620*3/4F C ；F1-L2025*1/2F C F1-L2025*3/4F C ；F1-L2025*1F C ；F1-L2026*3/4F C F1-L2026*1F C ；F1-L2632*3/4F C ；F1-L2632*1F C F1C Female straight union F1-S0912*1/2F C ；F1-S0912*3/4F C ；F1-S1216*3/8F C F1-S1216*1/2F C ；F1-S1216*3/4F C ；F1-S1216*1F C F1-S1620*1/2F C ；F1-S1620*3/4F C ；F1-S2025*1/2F C F1-S2025*3/4F C ；F1-S2025*1F C ；F1-S2026*3/4F C F1-S2026*1F C ；F1-S2632*3/4F C ；F1-S2632*1F C F1C Male tee F1-T0912*1/2*0912 C ；F1-T0912*3/4*0912 C F1-T1216*3/8*1216 C ；F1-T1216*1/2*1216 C F1-T1216*3/4*1216 C；F1-T1216*1*1216 C F1-T1620*1/2*1620 C；F1-T1620*3/4*1620 C F1-T2025*1/2*2025 C；F1-T2025*3/4*2025 C F1-T2025*1*2025 C；F1-T2026*3/4*2026 C F1-T2026*1*2026 C；F1-T2632*3/4*2632 C F1-T2632*1*2632 C F1C Male elbow F1-L0912*1/2 C；F1-L0912*3/4 C；F1-L1216*3/8 C F1-L1216*1/2 C；F1-L1216*3/4 C；F1-L1216*1 C F1-L1620*1/2 C；F1-L1620*3/4 C；F1-L2025*1/2 C F1-L2025*3/4 C；F1-L2025*1 C；F1-L2026*3/4 C F1-L2026*1 C；F1-L2632*3/4 C；F1-L2632*1 C F1C Male straight union F1-S0912*1/2 C；F1-S0912*3/4 C；F1-S1216*3/8 C F1-S1216*1/2 C；F1-S1216*3/4 C；F1-S1216*1 C F1-S1620*1/2 C；F1-S1620*3/4 C；F1-S2025*1/2 C F1-S2025*3/4 C；F1-S2025*1 C；F1-S2026*3/4 C F1-S2026*1 C；F1-S2632*3/4 C；F1-S2632*1 C F1C Equal straight union F1-S0912*0912 C；F1-S1216*1216 C；F1-S1620*1620 C F1-S2025*2025 C；F1-S2026*2026 C；F1-S2632*2632 C F1C End cap F1-D0912；F1-D1216；F1-D1620；F1-D2025；F1-D2026 F1-D2632 F1C Unequal straight union F1-S1216*0912 C；F1-S1620*0912 C；F1-S1620*1216 C F1-S2025*0912 C；F1-S2025*1216 C；F1-S2025*1620 C F1-S2026*0912 C；F1-S2026*1216 C；F1-S2026*1620 C F1-S2632*0912 C；F1-S2632*1216 C；F1-S2632*1620 C F1-S2632*2025 C；F1-S2632*2026 C Models Added August 22: F5 Wall plated female elbow F5-L1216x1/2F（Z）；F5-L1620x1/2F（Z）； F5-L1620x3/4F（Z）；F5-L1216x1/2F（Z4）； F5-L1620x1/2F（Z4）；F5-L1620x3/4F（Z4） F5 Connector core F5-C1216x1/2；F5-C1620x1/2；F5-C1216x3/4； F5-C1620x3/4；F5-C2025x3/4 Models Added August 2022 F5 Wall plated female elbow F5-L1216x1/2F（Z）；F5-L1620x1/2F（Z）； F5-L1620x3/4F（Z）；F5-L1216x1/2F（Z4）； F5-L1620x1/2F（Z4）；F5-L1620x3/4F（Z4） F5 Connector core F5-C1216x1/2；F5-C1620x1/2；F5-C1216x3/4； F5-C1620x3/4；F5-C2025x3/4 F1 Connector core F1-C1216x1/2；F1-C1620x1/2；F1-C0912x3/4； F1-C1216x3/4；F1-C1620x3/4；F1-C2025x3/4 Models Added July 2023. F5 MLCP to Copper Adaptor: F5-S1216x15Cu（MUL); F5-S1620x15Cu（MUL） F5-S1620x22Cu（MUL); F5-S2025x22Cu（MUL） F5-S2025x28Cu（MUL); F5-S2632x28Cu（MUL） F5-S1216x15Cu（L150); F5-S1620x22Cu（L150). F5 MLCP to Copper Adaptor: F5-S1216x15Cu2; F5-S1620x22Cu2 F5-S2025x22Cu2; F5-S2632x28Cu2. Radiator elbow copper adapter: F5-L1216xφ15S. Assembly Double Fittings: F5-L1216xφ15S（Z1)(GZ1). Copper Radiator Tee: F5-T1216xφ15Sx1216.

Models added October 2023: F1 MLCP to Copper Adaptor: F1-S1216x15Cu C（MUL); F1-S1620x15Cu C（MUL) F1-S1620x22Cu C（MUL); F1-S2025x22Cu C（MUL） F1-S2025x28Cu C（MUL); F1-S2632x28Cu C（MUL). F1 MLCP to Copper Adaptor: F1-S1216x15Cu2 C; F1-S1620x15Cu2 C F1-S2025x28Cu2 C; F1-S2632x28Cu2 C.

Approval Holder:

RIIFO UK LTD

Company Name

RIIFO UK LTD

Address

Spear House Cobbett Road Burntwood

Postcode

WS7 3GR

General Email

simon.marklew@riifo.com

View All Listings by this Company

Range of brass press fittings (TH and U crimp profiles) with EPDM ‘O’-rings for use with RIIFO B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310922

Size:

40mm, 50mm, 63mm & 75mm. Sizes added November 2024: 16mm; 20mm; 25mm, 32mm.

Marking:

Fittings: RIIFO & size ON BODY. Pipe: RIIFO, WRAS, size, date of manufacture and time (YYYYMMDDHHMMSS) and batch number on pipe.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

B1 multilayer PEX/AL/PEX pipe: B1-3240, B1-4150, B1-5163, B1-6075. F18 press fittings: F18 Equal straight union: F18-S3240x3240, F18-S4150x4150, F18-S5163x5163, F18-S6075x6075. F18 Reducer: F18-S3240x1620, F18-S3240x2025, F18-S3240x2632, F18-S4150x2025, F18-S4150x2632, F18-S4150x3240, F18-S5163x2632, F18-S5163x3240, F18-S5163x4150, F18-S6075x3240, F18-S6075x4150, F18-S6075x5163. F18 Equal elbow: F18-L3240x3240, F18-L4150x4150, F18-L5163x5163, F18-L6075x6075. F18 Equal elbow (45°): F18-L3240x3240 (45°), F18-L4150x4150 (45°), F18-L5163x5163 (45°), F18-L6075x6075 (45°). F18 Equal tee: F18-T3240x3240x3240, F18-T4150x4150x4150, F18-T5163x5163x5163, F18-T6075x6075x6075. F18 Unequal tee: F18-T3240x1216x3240, F18-T3240x1620x3240, F18-T3240x2025x2632, F18-T3240x2025x3240, F18-T3240x2632x2632, F18-T3240x2632x3240, F18-T3240x4150x3240, F18-T4150x1620x4150, F18-T4150x2025x3240, F18-T4150x2025x4150, F18-T4150x2632x4150, F18-T4150x3240x4150, F18-T5163x2025x5163, F18-T5163x2632x5163, F18-T5163x3240x5163, F18-T5163x4150x5163, F18-T6075x2632x6075, F18-T6075x3240x6075, F18-T6075x4150x6075, F18-T6075x5163x6075. F18 Male straight union: F18-S3240x1 1/2, F18-S3240x1 1/4, F18-S3240x1, F18-S4150x1 1/2, F18-S4150x2, F18-S5163x1 1/2, F18-S5163x2, F18-S6075x2 1/2. F18 Female straight union: F18-S3240x1 1/2F, F18-S3240x1 1/4F, F18-S4150x1 1/2F, F18-S5163x2F, F18-S6075x2 1/2F. F18 Male elbow: F18-L3240x1 1/4, F18-L3240x1 1/2, F18-L4150x1 1/2, F18-L5163x2, F18-L6075x2 1/2. F18 Female elbow: F18-L3240x1 1/4F, F18-L3240x1 1/2F, F18-L4150x1 1/2F, F18-L5163x2F, F18-L6075x2 1/2F. F18 Male tee: F18-T3240x1/2x3240, F18-T3240x1x3240, F18-T3240x3/4x3240, F18-T3240x1 1/4x3240, F18-T4150x1 1/2x4150, F18-T4150x1/2x4150, F18-T4150x3/4x4150, F18-T4150x1x4150, F18-T5163x1/2x5163, F18-T5163x1x5163, F18-T5163x2x5163, F18-T5163x3/4x5163. F18 Female tee: F18-T3240x1/2Fx3240, F18-T3240x3/4Fx3240, F18-T3240x1Fx3240, F18-T3240x1 1/4Fx3240, F18-T4150x1/2Fx4150, F18-T4150x3/4Fx4150, F18-T4150x1Fx4150, F18-T4150x1 1/2Fx4150, F18-T5163x1/2Fx5163, F18-T5163x3/4Fx5163, F18-T5163x1Fx5163, F18-T5163x2Fx5163, F18-T6075x1Fx6075, F18-T6075x1 1/2Fx6075, F18-T6075x2Fx6075, F18-T6075x2 1/2Fx6075. F18 End cap: F18-D3240, F18-D4150, F18-D5163, F18-D6075. Models Added October 2024: F18 Demountable female straight union F18-S3240x1 1/2F (H) F18-S3240x1 1/4F (H） F18-S4150x1 1/2F (H) F18-S4150x2F (H) F18-S5163x2F (H) F18-S6075x2 1/2F (H)

Models added November 2024: B1 multilayer PEX/AL/PEX pipe: B1-1216, B1-1620, B1-2025, B1-2632. F18 press fittings: F18 Equal straight union: F18-S1216x1216, F18-S1620x1620, F18-S2025x2025, F18-S2632x2632. F18 Reducer: F18-S1620x1216, F18-S2025x1216, F18-S2025x1620, F18-S2632x1216, F18-S2632x1620, F18-S2632x2025. F18 Male straight union: F18-S1216x3/8, F18-S1216x1/4, F18-S1216x1/2, F18-S1216x3/4, F18-S1216x1, F18-S1620x3/8, F18-S1620x1/2, F18-S1620x3/4, F18-S1620x1, F18-S2025x1/2, F18-S2025x3/4, F18-S2025x1, F18-S2632x1/2, F18-S2632x3/4, F18-S2632x1, F18-S2632x1 ¼, F18-S2632x1 1/2. F18 Female straight union: F18-S1216x3/8F, F18-S1216x/4F, F18-S1216x1/2F, F18-S1216x3/4F, F18-S1216x1F, F18-S1620x3/8F, F18-S1620x*1/2F, F18-S1620x3/4F, F18-S1620x1F, F18-S2025x1/2F, F18-S2025x3/4F, F18-S2025x1F, F18-S2632x1/2F, F18-S2632x3/4F, F18-S2632x1F, F18-S2632x1 1/4F, F18-S2632x1 1/2F. F18 Equal elbow: F18-L1216x1216, F18-L1620x1620, F18-L2025x2025, F18-L2632x2632. F18 Unequal elbow: F18-L1620x1216, F18-L2025x1216, F18-L2025x1620, F18-L2632x1216, F18-L2632x1620, F18-L2632x2025. F18 Male elbow: F18-L1216x3/8, F18-L1216x1/4, F18-L1216x1/2, F18-L1216x3/4, F18-L1216x1, F18-L1620x3/8, F18-L1620x1/2, F18-L1620x3/4, F18-L1620x1, F18-L2025x1/2, F18-L2025x3/4, F18-L2025x1, F18-L2632x1/2, F18-L2632x3/4, F18-L2632x1, F18-L2632x1 ¼, F18-L2632x1 ½. F18 Female elbow: F18-L1216x3/8F, F18-L1216x1/4F, F18-L1216x1/2F, F18-L1216x3/4F, F18-L1216x1F, F18-L1620x3/8F, F18-L1620x1/2F, F18-L1620x3/4F, F18-L1620x1F, F18-L2025x1/2F, F18-L2025x3/4F, F18-L2025x1F, F18-L2632x1/2F, F18-L2632x3/4F, F18-L2632x1F, F18-L2632x1 1/4F, F18-L2632x1 1/2F. F18 Equal tee: F18-T1216x1216x1216, F18-T1620x1620x1620, F18-T2025x2025x2025, F18-T2632x2632x2632. F18 Unequal tee: F18-T1216x1620x1216, F18-T1216x2025x1216, F18-T1620x1216x1620, F18-T1620x1216x1216, F18-T1620x1620x1216, F18-T1620x2025x1620, F18-T2025x1216x1216, F18-T2025x1216x1620, F18-T2025x1216x2025, F18-T2025x1620x1216, F18-T2025x1620x1620, F18-T2025x1620x2025, F18-T2025x2025x1216, F18-T2025x2025x1620, F18-T2025x2632x2025, F18-T2632x1216x2632, F18-T2632x1620x2632, F18-T2632x2025x2025, F18-T2632x2025x2632. F18 Male tee: F18-T1216x3/8x1216, F18-T1216x1/4x1216, F18-T1216x1/2x1216, F18-T1216x3/4x1216, F18-T1216x1x1216, F18-T1620x3/8x1620, F18-T1620x1/2x1620, F18-T1620x3/4x1620, F18-T1620x1x1620, F18-T2025x1/2x2025, F18-T2025x3/4x2025, F18-T2025x1x2025, F18-T2632x1/2x2632, F18-T2632x3/4x2632, F18-T2632x1x2632, F18-T2632x1 1/4x2632, F18-T2632x1 1/2x2632. F18 Female tee: F18-T1216x3/8Fx1216, F18-T1216x1/4Fx1216, F18-T1216x1/2Fx1216, F18-T1216x3/4Fx1216, F18-T1216x1Fx1216, F18-T1620x3/8Fx1620, F18-T1620x1/2Fx1620, F18-T1620x3/4Fx1620, F18-T1620x1Fx1620, F18-T2025x1/2Fx2025, F18-T2025x3/4Fx2025, F18-T2025x1Fx2025, F18-T2632x1/2Fx2632, F18-T2632x3/4Fx2632, F18-T2632x1Fx2632, F18-T2632x1 1/4Fx2632, F18-T2632x1 1/2Fx2632. F18 Demountable female straight union: F18-S1216x3/8F(H), F18-S1216x1/4F(H), F18-S1216x1/2F(H), F18-S1216x3/4F(H), F18-S1216x1F(H), F18-S1620x3/8F(H), F18-S1620x1/2F(H), F18-S1620x3/4F(H), F18-S1620x1F(H), F18-S2025x1/2F(H), F18-S2025x3/4F(H), F18-S2025x1F(H), F18-S2632x1/2F(H), F18-S2632x3/4F(H), F18-S2632x1F(H), F18-S2632x1 1/4F(H), F18-S2632x1 1/2F(H). F18 Demountable female elbow: F18e-L1216x3/8F（H3), F18e-L1216x1/4F(H3), F18e-L1216x1/2F (H3), F18e-L1216x3/4F (H3), F18e-L1216x1F (H3), F18e-L1620x3/8F (H3), F18e-L1620x1/2F (H3), F18e-L1620x3/4F (H3), F18e-L1620x1F(H3), F18e-L2025x1/2F(H3), F18e-L2025x3/4F(H3), F18e-L2025x1F(H3), F18e-L2632x1/2F(H3), F18e-L2632x3/4F(H3), F18e-L2632x1F (H3), F18e-L2632x1 1/4F (H3), F18e-L2632x1 1/2F(H3). F18 End cap: F18-D1216, F18-D1620, F18-D2025, F18-D2632. F18 Wall plated female elbow: F18-L1216x1/2F(Z), F18-L1620x1/2F(Z), F18-L1620x3/4F(Z), F18-L1216x1/2FL38(Z3), F18-L1620x1/2FL42(Z3), F18-L1620x3/4FL42(Z3). F18 Core connector: F18-C1216x1/2, F18-C1620x1/2, F18-C1216x3/4, F18-C1620x3/4, F18-C2025x3/4. F18 Copper adaptor (press end): F18-S1216x15Cu(50), F18-S1620x15Cu(50), F18-S1620x22Cu(50), F18-S2025x22Cu(50), F18-S2025x28Cu(50), F18-S2632x28Cu(50), F18-S1216x15Cu(L150), F18-S1620x22Cu(L150). F18 Copper adaptor (compression end): F18-S1216x15Cu2, F18-S1620x22Cu2, F18-S2025x22Cu2, F18-S2632x28Cu2. F18 Radiator elbow copper adaptor: F18-L1216xφ15S. F18 Assembly double Fittings: F18-L1216xφ15S(Z1)(GZ1). F18 Copper radiator tee: F18-T1216xφ15Sx1216.

Approval Holder:

RIIFO UK LTD

Company Name

RIIFO UK LTD

Address

Spear House Cobbett Road Burntwood

Postcode

WS7 3GR

General Email

simon.marklew@riifo.com

View All Listings by this Company

‘FS5 Series’ of 2 port, 3 port and 4 port nickel plated brass manifolds incorporating spherical valves with chromium plated brass balls and PTFE seats. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1950 Manifolds

Section Subtitle:

Metal.

WRAS Approval Number:

2312023

Size:

See models.

Marking:

Riifo logo, size, PN and model on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

FS5-3/4-1/2x2 (3/4” BSP (F) Inlet, ¾” BSP (M) outlet and 2x ½” BSP (M) spherical valve outlets), FS5-3/4-1/2x3 (3/4” BSP (F) Inlet, ¾” BSP (M) outlet and 3x ½” BSP (M) spherical valve outlets), FS5-3/4-1/2x4 (3/4” BSP (F) Inlet, ¾” BSP (M) outlet and 4x ½” BSP (M) spherical valve outlets), FS5-1-3/4x2 (1” BSP (F) Inlet, 1” BSP (M) outlet and 2x ¾” BSP (M) spherical valve outlets), FS5-1-3/4x3 (1” BSP (F) Inlet, 1” BSP (M) outlet and 3x ¾” BSP (M) spherical valve outlets), FS5-1-3/4x4 (1” BSP (F) Inlet, 1” BSP (M) outlet and 4x ¾” BSP (M) spherical valve outlets). All models are available with either a red or blue handles.

Approval Holder:

RIIFO UK LTD

Company Name

RIIFO UK LTD

Address

Spear House Cobbett Road Burntwood

Postcode

WS7 3GR

General Email

simon.marklew@riifo.com

View All Listings by this Company

Range of in-line press-fit spherical valves (brass body) butterfly or lever operating members. For use with RIIFO B1 PEX/AL/PEX multilayer pipe, using either ‘TH’ or ‘U’ crimp profiles. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

241106001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm, 20mm, 25mm, & 32mm.

Marking:

RIIFO & size on crimp sleeve

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

Model range “F18”: 202 Blue butterfly handle ball valve: BF QF18-1216x1216 B BF QF18-1620x1620 B BF QF18-2025x2025 B BF QF18-2632X2632 B 202 Blue butterfly handle ball valve: BF QF18-1216x1/2M B BF QF18-1620x1/2M B BF QF18-2025x3/4M B 202 Blue butterfly handle ball valve: BF QF18-1216x1/2F B BF QF18-1620x1/2F B BF QF18-2025x3/4F B 202 Red butterfly handle ball valve: BF QF18-1216x1216 R BF QF18-1620x1620 R BF QF18-2025x2025 R BF QF18-2632X2632 R 202 Red butterfly handle ball valve: BF QF18-1216x1/2M R BF QF18-1620x1/2M R BF QF18-2025x3/4M R 202 Red butterfly handle ball valve: BF QF18-1216x1/2F R BF QF18-1620x1/2F R BF QF18-2025x3/4F R 202 Blue long handle ball valve: QF18-1216x1216 B QF18-1620x1620 B QF18-2025x2025 B QF18-2632x2632 B 202 Red long handle ball valve: QF18-1216x1216 R QF18-1620x1620 R QF18-2025x2025 R QF18-2632x2632 R

Approval Holder:

RIIFO UK LTD

Company Name

RIIFO UK LTD

Address

Spear House Cobbett Road Burntwood

Postcode

WS7 3GR

General Email

simon.marklew@riifo.com

View All Listings by this Company

Range of brass press fittings (TH and U crimp profiles) for use with RIIFO B1 PEX/AL/PEX multilayer pipe. Maximum working pressure: 10 bar Maximum operating temperature: 95 °C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241106002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm, 20mm, 25mm, 32mm

Marking:

RIIFO, Size, date of manufacture (yyyy/mm), Crimp Profiles (U-TH-H) on crimp sleeve. RIIFO; size (outer diameter x wall thickness); date of manufacture and time (YYYYMMDDHHMMSS) & batch no on pipe

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

B1 multilayer PEX/AL/PEX pipe: B1-1216, B1-1620, B1-2025, B1-2632. F18 press fittings: F18 Equal straight union: F18-S1216x1216, F18-S1620x1620, F18-S2025x2025, F18-S2632x2632. F18 Reducer: F18-S1620x1216, F18-S2025x1216, F18-S2025x1620, F18-S2632x1216, F18-S2632x1620, F18-S2632x2025. F18 Male straight union: F18-S1216x3/8, F18-S1216x1/4, F18-S1216x1/2, F18-S1216x3/4, F18-S1216x1, F18-S1620x3/8, F18-S1620x1/2, F18-S1620x3/4, F18-S1620x1, F18-S2025x1/2, F18-S2025x3/4, F18-S2025x1, F18-S2632x1/2, F18-S2632x3/4, F18-S2632x1, F18-S2632x1 ¼, F18-S2632x1 1/2. F18 Female straight union: F18-S1216x3/8F, F18-S1216x/4F, F18-S1216x1/2F, F18-S1216x3/4F, F18-S1216x1F, F18-S1620x3/8F, F18-S1620x*1/2F, F18-S1620x3/4F, F18-S1620x1F, F18-S2025x1/2F, F18-S2025x3/4F, F18-S2025x1F, F18-S2632x1/2F, F18-S2632x3/4F, F18-S2632x1F, F18-S2632x1 1/4F, F18-S2632x1 1/2F. F18 Equal elbow: F18-L1216x1216, F18-L1620x1620, F18-L2025x2025, F18-L2632x2632. F18 Unequal elbow: F18-L1620x1216, F18-L2025x1216, F18-L2025x1620, F18-L2632x1216, F18-L2632x1620, F18-L2632x2025. F18 Male elbow: F18-L1216x3/8, F18-L1216x1/4, F18-L1216x1/2, F18-L1216x3/4, F18-L1216x1, F18-L1620x3/8, F18-L1620x1/2, F18-L1620x3/4, F18-L1620x1, F18-L2025x1/2, F18-L2025x3/4, F18-L2025x1, F18-L2632x1/2, F18-L2632x3/4, F18-L2632x1, F18-L2632x1 ¼, F18-L2632x1 ½. F18 Female elbow: F18-L1216x3/8F, F18-L1216x1/4F, F18-L1216x1/2F, F18-L1216x3/4F, F18-L1216x1F, F18-L1620x3/8F, F18-L1620x1/2F, F18-L1620x3/4F, F18-L1620x1F, F18-L2025x1/2F, F18-L2025x3/4F, F18-L2025x1F, F18-L2632x1/2F, F18-L2632x3/4F, F18-L2632x1F, F18-L2632x1 1/4F, F18-L2632x1 1/2F. F18 Unequal tee: F18-T1216x1620x1216, F18-T1216x2025x1216, F18-T1620x1216x1620, F18-T1620x1216x1216, F18-T1620x1620x1216, F18-T1620x2025x1620, F18-T2025x1216x1216, F18-T2025x1216x1620, F18-T2025x1216x2025, F18-T2025x1620x1216, F18-T2025x1620x1620, F18-T2025x1620x2025, F18-T2025x2025x1216, F18-T2025x2025x1620, F18-T2025x2632x2025, F18-T2632x1216x2632, F18-T2632x1620x2632, F18-T2632x2025x2025, F18-T2632x2025x2632.

F18 Equal tee: F18-T1216x1216x1216, F18-T1620x1620x1620, F18-T2025x2025x2025, F18-T2632x2632x2632. F18 Male tee: F18-T1216x3/8x1216, F18-T1216x1/4x1216, F18-T1216x1/2x1216, F18-T1216x3/4x1216, F18-T1216x1x1216, F18-T1620x3/8x1620, F18-T1620x1/2x1620, F18-T1620x3/4x1620, F18-T1620x1x1620, F18-T2025x1/2x2025, F18-T2025x3/4x2025, F18-T2025x1x2025, F18-T2632x1/2x2632, F18-T2632x3/4x2632, F18-T2632x1x2632, F18-T2632x1 1/4x2632, F18-T2632x1 1/2x2632. F18 Female tee: F18-T1216x3/8Fx1216, F18-T1216x1/4Fx1216, F18-T1216x1/2Fx1216, F18-T1216x3/4Fx1216, F18-T1216x1Fx1216, F18-T1620x3/8Fx1620, F18-T1620x1/2Fx1620, F18-T1620x3/4Fx1620, F18-T1620x1Fx1620, F18-T2025x1/2Fx2025, F18-T2025x3/4Fx2025, F18-T2025x1Fx2025, F18-T2632x1/2Fx2632, F18-T2632x3/4Fx2632, F18-T2632x1Fx2632, F18-T2632x1 1/4Fx2632, F18-T2632x1 1/2Fx2632. F18 Demountable female straight union: F18-S1216x3/8F(H), F18-S1216x1/4F(H), F18-S1216x1/2F(H), F18-S1216x3/4F(H), F18-S1216x1F(H), F18-S1620x3/8F(H), F18-S1620x1/2F(H), F18-S1620x3/4F(H), F18-S1620x1F(H), F18-S2025x1/2F(H), F18-S2025x3/4F(H), F18-S2025x1F(H), F18-S2632x1/2F(H), F18-S2632x3/4F(H), F18-S2632x1F(H), F18-S2632x1 1/4F(H), F18-S2632x1 1/2F(H). F18 Demountable female elbow: F18e-L1216x3/8F（H3), F18e-L1216x1/4F(H3), F18e-L1216x1/2F (H3), F18e-L1216x3/4F (H3), F18e-L1216x1F (H3), F18e-L1620x3/8F (H3), F18e-L1620x1/2F (H3), F18e-L1620x3/4F (H3), F18e-L1620x1F(H3), F18e-L2025x1/2F(H3), F18e-L2025x3/4F(H3), F18e-L2025x1F(H3), F18e-L2632x1/2F(H3), F18e-L2632x3/4F(H3), F18e-L2632x1F (H3), F18e-L2632x1 1/4F (H3), F18e-L2632x1 1/2F(H3). F18 End cap: F18-D1216, F18-D1620, F18-D2025, F18-D2632. F18 Wall plated female elbow: F18-L1216x1/2F(Z), F18-L1620x1/2F(Z), F18-L1620x3/4F(Z), F18-L1216x1/2FL38(Z3), F18-L1620x1/2FL42(Z3), F18-L1620x3/4FL42(Z3). F18 Core connector: F18-C1216x1/2, F18-C1620x1/2, F18-C1216x3/4, F18-C1620x3/4, F18-C2025x3/4. F18 Copper adaptor (press end): F18-S1216x15Cu(50), F18-S1620x15Cu(50), F18-S1620x22Cu(50), F18-S2025x22Cu(50), F18-S2025x28Cu(50), F18-S2632x28Cu(50), F18-S1216x15Cu(L150), F18-S1620x22Cu(L150). F18 Copper adaptor (compression end): F18-S1216x15Cu2, F18-S1620x22Cu2, F18-S2025x22Cu2, F18-S2632x28Cu2. F18 Radiator elbow copper adaptor: F18-L1216xφ15S. F18 Assembly double Fittings: F18-L1216xφ15S(Z1)(GZ1). F18 Copper radiator tee: F18-T1216xφ15Sx1216. Models Added January 2025: F18 Radiator elbow copper adapter: F18-L1216x15Cu (L150), F18-L1620x22Cu(L150). F18 Equal elbow(45°): F18-L1216X1216(45°), F18-L1620X1620(45°), F18-L2025X2025(45°), F18-L2632X2632(45°).

Approval Holder:

RIIFO UK LTD

Company Name

RIIFO UK LTD

Address

Spear House Cobbett Road Burntwood

Postcode

WS7 3GR

General Email

simon.marklew@riifo.com

View All Listings by this Company