Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated or nickel plated, ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

2201119

Size:

DN50 to DN600 flanged

Marking:

Pegler (brand of Aalberts) PN, DN and other technical information on name plate on body. DN, PN and Model on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

V905BG Pegler butterfly Valve DI LUG gear DN50 -DN600, V905B Pegler butterfly valve DI LUG lever DN50 -DN200, V905BA Pegler butterfly valve DI LUG motor DN50 -DN600 & V905BX Pegler butterfly valve DI LUG body DN300 -DN600

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of brass and copper end feed fittings for use with copper pipe (manufactured to EN 1057). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Endex and size on body of fitting

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

N6 - Reducer, larger end male - 88310 (66.7 x 28mm), N6 - Reducer, larger end male - 88311 (66.7 x 35mm), N6 - Reducer, larger end male - 88312 (66.7 x 42mm), N6 - Reducer, larger end male - 88313 (66.7 x 54mm), N6 - Reducer, larger end male - 89624 (76.1 x 35mm), N6 - Reducer, larger end male - 89625 (76.1 x 42mm), N6 - Reducer, larger end male - 89626 (76.1 x 54mm), N6 - Reducer, larger end male - 89630 (108 x 42mm), N6 - Reducer, larger end male - 89631 (108 x 54mm), N6 - Reducer, larger end male - 89699 (133 x 42mm), N6 - Reducer, larger end male - 89700 (133 x 54mm), N6 - Reducer, larger end male - 89704 (159 x 54mm), N25 - Tee, reduced branch - 88807 (66.7mm x 28mm), N25 - Tee, reduced branch - 89055 (66.7mm x 35mm), N25 - Tee, reduced branch - 89056 (66.7mm x 42mm), N25 - Tee, reduced branch - 89057 (66.7mm x 54mm), N25 - Tee, reduced branch - 89058 (76.1mm x 28mm), N25 - Tee, reduced branch - 89000 (76.1mm x 35mm), N25 - Tee, reduced branch - 89654 (76.1mm x 42mm), N25 - Tee, reduced branch - 89001 (76.1mm x 54mm), N25 - Tee, reduced branch - 89059 (108mm x 35mm), N25 - Tee, reduced branch - 89660 (108mm x 54mm), N25 - Tee, reduced branch - 89715 (133mm x 54mm), N25 - Tee, reduced branch - 89717 (159mm x 54mm),

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company