Concealed BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

250101702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Dudley & thomasdudley.co.uk moulded on inside of lid TD on cap Flush volume inside cistern.

Installation Requirements:

R001 R280 R556

Expiry date:

31/01/2030

Model:

Coalbrook Concealed Cistern.

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies incorporating brass bodies (various finishes) and ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250708002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Grey PET braided, PEX lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

Manufactures logo on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2030

Model:

XX1001YY. XX denotes the trim and can be replaced with: DO – Domo DC – Decca ZU – Zurich Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headworks with dome type or single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250708004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Coalbrook logo on body. (Brand of Davroc)

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2030

Model:

XX 1008 YY, XX 1011 YY, XX 1018 YY, XX 1021 YY. XX denotes the trim and can be replaced with: DO – Domo DC Decca ZU – Zurich BA - Bank Middle numbers (e.g. 1008) – This is the numeric code allocated to the model and remains constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass BB = Brushed Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies, that incorporate brass bodies (various finishes) and ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250708005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Male.

Marking:

Coalbrook logo on spout. (Brand of Davroc).

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Model:

XX1007YY, XX1009YY. XX denotes the trim and can be replaced with: DO – Domo DC – Decca ZU – Zurich Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Wall mounted shower kit incorporating a plastic shower handset (various finishes), shower hose, wall mounted elbow socket and riser rail. Open outlet use only. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250708006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Male

Marking:

Coalbrook (Davroc brand) logo on body of handset and Shower Socket.

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

XX4002YY. XX denotes the trim and can be replaced with: CO - Coalbrook Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN - Brushed Nickel CP - Chrome GM - Gunmetal BB - Brushed Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company