Thomas Dudley Limited Approvals


#250101701

Concealed BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250101701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Dudley & thomasdudley.co.uk moulded on inside of lid Flush volume inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/01/2030
Model:
Miniflo Concealed Cistern.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250201701

Dudley Cascade Plus dual flush WC syphon flushing apparatus with a plastic body and stainless-steel link for use with WC flushing cisterns.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
250201701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½” Outlet, Syphon heights 7” to 11”
Marking:
Cascade + and Thomas Dudley Ltd or Cronex (Cronex is a brand name of Cronexrabo which is a subsidiary company of Thomas Dudley Limited) on cap.
Installation Requirements:
R001 R556
Expiry date:
28/02/2030
Model:
Dudley Cascade Plus

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#241101704

Range of plastic ball floats. Grade C Blue float - cold water use only. Grade H Red float - for use up to 93°C.

Section:
1290 Floats
Section Subtitle:
Plastics.
WRAS Approval Number:
241101704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Various
Marking:
Dudley, Qualifloat or Beta, Size designation and BS2456 on body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
114S (4½’’) BS2456 Grade C Blue Spherical Qualifloat 114S (4½’’) BS2456 Grade H Red Beta Spherical Float 127S (5’’) BS2456 Grade H Red Beta Spherical Float

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250201702

Concealed BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. The supply hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250201702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection
Marking:
Front service cover is marked with Dudley logo moulding Top of outlet drop valve marked TD Front nut of inlet valve marked DUDLEY
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2030
Model:
Vantage Concealed Cistern (Category 3)

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250201703

Concealed BS EN 14055: 2018 WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5) with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. The supply hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2034 Cistern - Flushing
Section Subtitle:
Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:
250201703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Front service cover is marked with Dudley logo moulding Top of outlet drop valve marked TD Front nut of inlet valve marked DUDLEY
Installation Requirements:
R001 R574 R581
Expiry date:
31/01/2030
Model:
Vantage Concealed Cistern (Category 5).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 10

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.