Range of single hole, single outlet, fixed, electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled via an infra-red activated solenoid valve and the spout outlets incorporate plastic aerators. The inlets incorporate a stainless-steel filter washer. Maximum working pressure 8.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2309073

Size:

Stainless steel braided, PEX lined hose with 3/8” BSP captive nut

Marking:

Dudley on body

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2028

Model:

Contemporary Battery with extended spout, Contemporary Mains Deck Mounted with Stainless Steel effect finish, Contemporary Mains Deck Mounted with Matt Black effect finish, Contemporary Mains Deck Mounted with Matt Black effect finish, 2.5LPM regulated Contemporary Mains, Contemporary Mains with extended height and spout Contemporary Battery

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of wall mounted, electronically controlled combination tap assemblies, (chrome plated brass or stainless steel bodies). The flow is controlled by a solenoid valve that is activated via an infra-red sensor The spout outlet incorporates a plastic aerator. The product incorporates a stainless steel braided PEX lined flexible connection hose assembly, connecting the spout to the solenoid valve. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2310140

Size:

1/2" BSP (M) X 10mm spigot solenoid valve

Marking:

Dudley on base of tap body.

Installation Requirements:

R001 R009 R040

Expiry date:

31/10/2028

Model:

Electroflo Horizon Battery Electroflo Horizon Mains

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of spherical valve with a brass body (chrome plated) and chrome plated brass ball, incorporating EPDM o-rings. Compression connection to be used with copper pipe EN1057. Maximum working pressure 16 Bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2312384

Size:

15mm compression.

Marking:

BETA, flow arrow, date of manufacture MM/YY and size on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

PBRVAL363971 - CP Straight Washing Machine Valves W/Handle. PBRVAL363976 - Angle CP Washing Machine Valves W/Handle. PBRVAL363977 - Tee CP Washing Machine Valves W/Handle. PBRVAL364039 - Chrome Plated Isolating Valve full bore. Operating members can be red or blue in colour.

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of BS1212-4 (2016) float operated valves for WC flushing cisterns, bottom or side entry type with plastic or brass ½’’ BSP inlet. The inlet incorporates a strainer, Compact models incorporate a delay fill function. Maximum working pressure 10.0 bar. For use with cold water only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

240801001

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Note:

IRN R560 applies to pedestal & telescopic valves only. IRN R562 applies to telescopic valves only.

Size:

½" BSP (M) inlet.

Marking:

Dudley BS1212/4 on front nut. Hydroflo and WRAS approved product on overhead discharge nozzle.

Installation Requirements:

R001 R550 R560 R562

Expiry date:

31/08/2029

Model:

Hydroflo Range Standard (Plastic or Brass Inlet): Hydroflo Side Inlet. Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12”. Hydroflo Compact Range Standard (Plastic or Brass Inlet): Hydroflo Side Inlet (Delayed Fill). Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12” (Delayed Fill). Hydroflo Range Enhanced (Plastic or Brass Inlet): Hydroflo Side Inlet. Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12”. Hydroflo Telescopic Hydroflo Compact Range Enhanced (Plastic or Brass Inlet): Hydroflo Side Inlet (Delayed Fill). Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12” (Delayed Fill). Hydroflo Telescopic (Delayed Fill). Hydroflo Range Flow Regulated (Plastic or Brass Inlet): Hydroflo Side Inlet. Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12”. Hydroflo Compact Range Flow Regulated (Plastic or Brass Inlet): Hydroflo Side Inlet (Delayed Fill). Hydroflo Pedestal 8”, 8½”, 9”, 9½”, 10”, 10½”, 11”, 11½”, 12” (Delayed Fill).

Product Images

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of single hole, single outlet electronically controlled tap assemblies (chromium plated brass), incorporating a solenoid valve controlling the flow which is actuated via infrared sensor. The spouts incorporate plastic aerators. Maximum working pressure 8.0 Bar. Maximum operating temperature 65.0°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240402073

Size:

Stainless steel braided, PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.

Marking:

Dudley on body.

Installation Requirements:

R001 R006 R009

Expiry date:

30/04/2029

Model:

Electroflo Arc Battery Electroflo Arc Mains

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company