Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with either a single lever or cross-top operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1906123

Expiry date:

30/06/2024

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections.

Marking:

NABIS ON OPERATING MEMBER NABIS ON INDICE ON MODEL B0819 ONLY

Installation Requirements:

R001 R006 R010

Model:

B08927, B08923 & B08917

Factor:

Wolseley

Company Name

Wolseley

Address

Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc and single lever operating members (C48122 model) or non-rising spindle headworks (C48108 & C48106 models) with either cross top (C48106 model) or dome type (C48108 model) operating members. The spout outlet incorporates a plastic aerator or a flow straightener, supplied with both. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1912704

Expiry date:

31/12/2024

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

SWAN BRAND OF WOLSELEY ON INDICE

Installation Requirements:

R001 R006 R010

Model:

C48108 SWAN STANDARD DC BASIN C48122 SWAN 1/4 TURN LEVER MONO BASIN C48106 SWAN STANDARD DC BASIN

Factor:

Wolseley

Company Name

Wolseley

Address

Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

View All Listings by this Company

Range of two hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating either a ¼ turn ceramic disc (model 348119) or a non-rising spindle (models C48105 & C48113) headworks with either cross top (model C48113), dome type (modelC48105) or single lever (model C48119) operating members. The products are supplied with both an aerator and flow straightener and metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910705

Expiry date:

31/10/2024

Size:

½” BSP (M)

Marking:

SWAN LOGO BRAND OF WOLSELEY ON INDICE

Installation Requirements:

R001 R006 R010

Model:

C48113 SWAN X TOP 2 HOLE SINK MIXER, C48105 SWAN STANDARD 2 HOLE DECK SINK MIXER & C48119 SWAN 1/4 TURN LEVER DECK SINK MIXER

Factor:

Wolseley

Company Name

Wolseley

Address

Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

View All Listings by this Company

Range of shower kits. The A05051 model consists of shower handset (chrome plated plastic) EPDM lined shower hose and wall bracket. The A05049 model consists of shower handset (chrome plated plastic) EPDM lined shower hose, riser rail, soap dish and a hose retaining ring. Maximum operating temperature 70°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

1911903

Expiry date:

30/11/2024

Note:

Open outlet use only.

Size:

Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.

Marking:

Center on rear of shower handset.

Installation Requirements:

R001 R040

Model:

A05049 & A05051

Factor:

Wolseley

Company Name

Wolseley

Address

Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

View All Listings by this Company

'CB SIlicone Lubricant Spray 400ml (F15215)'. Clear, colourless silicone lubricant spray. Apply as per manufacturer's TDS 'issue 1' dated 28/03/2018. For use with water up to 85°C.

Section:

5160 Lubricants

WRAS Approval Number:

1912525

Expiry date:

31/12/2024

Model:

Manufacturer:

Wolseley

Company Name

Wolseley

Address

Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

View All Listings by this Company

Range of two-hole, single outlet (swivel) combination tap assemblies (antique brushed or chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or a plastic/stainless steel flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar Maximum operating temperature 70°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1907072

Expiry date:

31/07/2024

Size:

½” BSP (M)

Marking:

NABIS KITCHENS (BRAND OF WOLSELEY) ON INDICE OR OPERATING MEMBER

Installation Requirements:

R001 R006 R010

Model:

B08916 NABIS MONATE DECK KITCHEN MIXER & B08920 NABIS REGAL LEVER KITCHEN MIXER

Factor:

Wolseley

Company Name

Wolseley

Address

Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating non-rising spindle heads with dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, double outlet, swivel.

WRAS Approval Number:

2001910

Expiry date:

31/01/2025

Size:

Stainless steel braided EPDM lined hose assemblies with ½” captive nut end connections.

Marking:

Company logo (Swan) on operating members

Installation Requirements:

R001 R006 R010

Model:

C58107

Factor:

Wolseley

Company Name

Wolseley

Address

Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

View All Listings by this Company